linux-kernel - Re: [PATCH] PCI/portdrv: Do not setup up IRQs if there are no users

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210820144532.GA25391@wunner.de>
Date:   Fri, 20 Aug 2021 16:45:32 +0200
From:   Lukas Wunner <lukas@...ner.de>
To:     Jan Kiszka <jan.kiszka@...mens.com>
Cc:     "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] PCI/portdrv: Do not setup up IRQs if there are no users

On Fri, Aug 20, 2021 at 03:52:18PM +0200, Jan Kiszka wrote:
> --- a/drivers/pci/pcie/portdrv_core.c
> +++ b/drivers/pci/pcie/portdrv_core.c
> @@ -312,7 +312,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq)
>   */
>  int pcie_port_device_register(struct pci_dev *dev)
>  {
> -	int status, capabilities, i, nr_service;
> +	int status, capabilities, irq_services, i, nr_service;
>  	int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
>  
>  	/* Enable PCI Express port device */
> @@ -326,18 +326,32 @@ int pcie_port_device_register(struct pci_dev *dev)
>  		return 0;
>  
>  	pci_set_master(dev);
> -	/*
> -	 * Initialize service irqs. Don't use service devices that
> -	 * require interrupts if there is no way to generate them.
> -	 * However, some drivers may have a polling mode (e.g. pciehp_poll_mode)
> -	 * that can be used in the absence of irqs.  Allow them to determine
> -	 * if that is to be used.
> -	 */
> -	status = pcie_init_service_irqs(dev, irqs, capabilities);
> -	if (status) {
> -		capabilities &= PCIE_PORT_SERVICE_HP;
> -		if (!capabilities)
> -			goto error_disable;
> +
> +	irq_services = 0;
> +	if (IS_ENABLED(CONFIG_PCIE_PME))
> +		irq_services |= PCIE_PORT_SERVICE_PME;
> +	if (IS_ENABLED(CONFIG_PCIEAER))
> +		irq_services |= PCIE_PORT_SERVICE_AER;
> +	if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
> +		irq_services |= PCIE_PORT_SERVICE_HP;
> +	if (IS_ENABLED(CONFIG_PCIE_DPC))
> +		irq_services |= PCIE_PORT_SERVICE_DPC;
> +	irq_services &= capabilities;

get_port_device_capability() would seem like a more natural place
to put these checks.

Note that your check for CONFIG_PCIEAER is superfluous due to
the "#ifdef CONFIG_PCIEAER" in get_port_device_capability().

Thanks,

Lukas