| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA=Fs0=k5GDmML7xy8PFwTKEWTDnO7KbWwv5vyO-sNUz0aO33A@mail.gmail.com>
Date: Sat, 21 Aug 2021 18:44:28 +0100
From: Phillip Potter <phil@...lpotter.co.uk>
To: Martin Kaiser <martin@...ser.cx>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Larry Finger <Larry.Finger@...inger.net>,
Dan Carpenter <dan.carpenter@...cle.com>,
Michael Straube <straube.linux@...il.com>,
linux-staging@...ts.linux.dev,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 03/10] staging: rtl8188eu: use actual request type as parameter
On Sat, 21 Aug 2021 at 17:49, Martin Kaiser <martin@...ser.cx> wrote:
>
> At the moment, usbctrl_vendorreq's requesttype parameter must be set to
> 1 for reading and 0 for writing. It's then converted to the actual
> bmRequestType for the USB control request. We can simplify the code and
> avoid this conversion if the caller passes the actual bmRequestType.
>
> This patch is an adaptation of commit 788fde031027 ("staging: rtl8188eu:
> use actual request type as parameter") for the new r8188eu driver.
>
> Signed-off-by: Martin Kaiser <martin@...ser.cx>
> ---
> drivers/staging/r8188eu/hal/usb_ops_linux.c | 46 ++++++---------------
> 1 file changed, 12 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> index a11a0597e515..dccb9fd34777 100644
> --- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
> +++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
> @@ -15,7 +15,6 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> struct usb_device *udev = dvobjpriv->pusbdev;
> unsigned int pipe;
> int status = 0;
> - u8 reqtype;
> u8 *pIo_buf;
> int vendorreq_times = 0;
>
> @@ -44,26 +43,24 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> while (++vendorreq_times <= MAX_USBCTRL_VENDORREQ_TIMES) {
> memset(pIo_buf, 0, len);
>
> - if (requesttype == 0x01) {
> + if (requesttype == REALTEK_USB_VENQT_READ) {
> pipe = usb_rcvctrlpipe(udev, 0);/* read_in */
> - reqtype = REALTEK_USB_VENQT_READ;
> } else {
> pipe = usb_sndctrlpipe(udev, 0);/* write_out */
> - reqtype = REALTEK_USB_VENQT_WRITE;
> memcpy(pIo_buf, pdata, len);
> }
>
> status = usb_control_msg(udev, pipe, REALTEK_USB_VENQT_CMD_REQ,
> - reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
> + requesttype, value, REALTEK_USB_VENQT_CMD_IDX,
> pIo_buf, len, RTW_USB_CONTROL_MSG_TIMEOUT);
>
> if (status == len) { /* Success this control transfer. */
> rtw_reset_continual_urb_error(dvobjpriv);
> - if (requesttype == 0x01)
> + if (requesttype == REALTEK_USB_VENQT_READ)
> memcpy(pdata, pIo_buf, len);
> } else { /* error cases */
> DBG_88E("reg 0x%x, usb %s %u fail, status:%d value=0x%x, vendorreq_times:%d\n",
> - value, (requesttype == 0x01) ? "read" : "write",
> + value, (requesttype == REALTEK_USB_VENQT_READ) ? "read" : "write",
> len, status, *(u32 *)pdata, vendorreq_times);
>
> if (status < 0) {
> @@ -75,7 +72,7 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
> }
> } else { /* status != len && status >= 0 */
> if (status > 0) {
> - if (requesttype == 0x01) {
> + if (requesttype == REALTEK_USB_VENQT_READ) {
> /* For Control read transfer, we have to copy the read data from pIo_buf to pdata. */
> memcpy(pdata, pIo_buf, len);
> }
> @@ -101,19 +98,16 @@ static int usbctrl_vendorreq(struct intf_hdl *pintfhdl, u16 value, void *pdata,
>
> static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> u8 data = 0;
>
>
>
> - requesttype = 0x01;/* read_in */
> -
> wvalue = (u16)(addr & 0x0000ffff);
> len = 1;
>
> - usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
>
>
> @@ -123,57 +117,49 @@ static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
>
> static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> __le32 data;
>
> - requesttype = 0x01;/* read_in */
> wvalue = (u16)(addr & 0x0000ffff);
> len = 2;
> - usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
> return (u16)(le32_to_cpu(data) & 0xffff);
> }
>
> static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> __le32 data;
>
> - requesttype = 0x01;/* read_in */
> -
> wvalue = (u16)(addr & 0x0000ffff);
> len = 4;
>
> - usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_READ);
>
> return le32_to_cpu(data);
> }
>
> static int usb_write8(struct intf_hdl *pintfhdl, u32 addr, u8 val)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> u8 data;
> int ret;
>
>
> - requesttype = 0x00;/* write_out */
> wvalue = (u16)(addr & 0x0000ffff);
> len = 1;
> data = val;
> - ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
> return ret;
> }
>
> static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> __le32 data;
> @@ -181,14 +167,12 @@ static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
>
>
>
> - requesttype = 0x00;/* write_out */
> -
> wvalue = (u16)(addr & 0x0000ffff);
> len = 2;
>
> data = cpu_to_le32(val & 0x0000ffff);
>
> - ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
>
>
> @@ -197,7 +181,6 @@ static int usb_write16(struct intf_hdl *pintfhdl, u32 addr, u16 val)
>
> static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> __le32 data;
> @@ -205,13 +188,11 @@ static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
>
>
>
> - requesttype = 0x00;/* write_out */
> -
> wvalue = (u16)(addr & 0x0000ffff);
> len = 4;
> data = cpu_to_le32(val);
>
> - ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
> + ret = usbctrl_vendorreq(pintfhdl, wvalue, &data, len, REALTEK_USB_VENQT_WRITE);
>
>
>
> @@ -220,7 +201,6 @@ static int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val)
>
> static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata)
> {
> - u8 requesttype;
> u16 wvalue;
> u16 len;
> u8 buf[VENDOR_CMD_MAX_DATA_LEN] = {0};
> @@ -228,13 +208,11 @@ static int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata
>
>
>
> - requesttype = 0x00;/* write_out */
> -
> wvalue = (u16)(addr & 0x0000ffff);
> len = length;
> memcpy(buf, pdata, len);
>
> - ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, len, requesttype);
> + ret = usbctrl_vendorreq(pintfhdl, wvalue, buf, len, REALTEK_USB_VENQT_WRITE);
>
> return ret;
> }
> --
> 2.20.1
>
Acked-by: Phillip Potter <phil@...lpotter.co.uk>
Regards,
Phil
Powered by blists - more mailing lists