| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <9383351175e4fb73f92f5c303b52176e281bf730.1629642658.git.paskripkin@gmail.com>
Date: Sun, 22 Aug 2021 17:35:54 +0300
From: Pavel Skripkin <paskripkin@...il.com>
To: Larry.Finger@...inger.net, phil@...lpotter.co.uk,
gregkh@...uxfoundation.org, straube.linux@...il.com,
fmdefrancesco@...il.com
Cc: linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
Pavel Skripkin <paskripkin@...il.com>
Subject: [PATCH RFC v2 4/6] staging: r8188eu: add error handling of rtw_read16
_rtw_read16 function can fail in case of usb transfer failure. But
previous function prototype wasn't designed to return an error to
caller. It can cause a lot uninit value bugs all across the driver code,
since rtw_read16() returns local stack variable to caller.
Fix it by changing the prototype of this function. Now it returns an
int: 0 on success, negative error value on failure and callers should pass
the pointer to storage location for register value.
Signed-off-by: Pavel Skripkin <paskripkin@...il.com>
---
drivers/staging/r8188eu/core/rtw_debug.c | 7 +++-
drivers/staging/r8188eu/core/rtw_io.c | 9 ++---
drivers/staging/r8188eu/core/rtw_mp_ioctl.c | 4 +-
drivers/staging/r8188eu/hal/odm_interface.c | 4 +-
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 29 +++++++++++----
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 5 ++-
drivers/staging/r8188eu/hal/usb_halinit.c | 37 ++++++++++++++++---
drivers/staging/r8188eu/hal/usb_ops_linux.c | 19 ++++++++--
.../staging/r8188eu/include/odm_interface.h | 2 +-
drivers/staging/r8188eu/include/rtw_io.h | 6 +--
drivers/staging/r8188eu/os_dep/ioctl_linux.c | 28 +++++++++++---
11 files changed, 112 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/r8188eu/core/rtw_debug.c b/drivers/staging/r8188eu/core/rtw_debug.c
index 8b7d3eb12bd0..a41675e101ac 100644
--- a/drivers/staging/r8188eu/core/rtw_debug.c
+++ b/drivers/staging/r8188eu/core/rtw_debug.c
@@ -91,7 +91,12 @@ int proc_get_read_reg(char *page, char **start,
proc_get_read_addr, (u8) tmp);
break;
case 2:
- len += snprintf(page + len, count - len, "rtw_read16(0x%x)=0x%x\n", proc_get_read_addr, rtw_read16(padapter, proc_get_read_addr));
+ error = rtw_read16(padapter, proc_get_read_addr, (u16 *) &tmp);
+ if (error)
+ return len;
+
+ len += snprintf(page + len, count - len, "rtw_read16(0x%x)=0x%x\n",
+ proc_get_read_addr, (u16) tmp);
break;
case 4:
len += snprintf(page + len, count - len, "rtw_read32(0x%x)=0x%x\n", proc_get_read_addr, rtw_read32(padapter, proc_get_read_addr));
diff --git a/drivers/staging/r8188eu/core/rtw_io.c b/drivers/staging/r8188eu/core/rtw_io.c
index 2714506c8ffb..fd64893c778d 100644
--- a/drivers/staging/r8188eu/core/rtw_io.c
+++ b/drivers/staging/r8188eu/core/rtw_io.c
@@ -45,18 +45,15 @@ int __must_check _rtw_read8(struct adapter *adapter, u32 addr, u8 *data)
return _read8(pintfhdl, addr, data);
}
-u16 _rtw_read16(struct adapter *adapter, u32 addr)
+int __must_check _rtw_read16(struct adapter *adapter, u32 addr, u16 *data)
{
- u16 r_val;
struct io_priv *pio_priv = &adapter->iopriv;
struct intf_hdl *pintfhdl = &pio_priv->intf;
- u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
+ int (*_read16)(struct intf_hdl *pintfhdl, u32 addr, u16 *data);
_read16 = pintfhdl->io_ops._read16;
- r_val = _read16(pintfhdl, addr);
-
- return r_val;
+ return _read16(pintfhdl, addr, data);
}
u32 _rtw_read32(struct adapter *adapter, u32 addr)
diff --git a/drivers/staging/r8188eu/core/rtw_mp_ioctl.c b/drivers/staging/r8188eu/core/rtw_mp_ioctl.c
index 894ab456f202..c6f7636c2174 100644
--- a/drivers/staging/r8188eu/core/rtw_mp_ioctl.c
+++ b/drivers/staging/r8188eu/core/rtw_mp_ioctl.c
@@ -653,7 +653,9 @@ int rtl8188eu_oid_rt_pro_read_register_hdl(struct oid_par_priv *poid_par_priv)
status = NDIS_STATUS_NOT_ACCEPTED;
break;
case 2:
- RegRWStruct->value = rtw_read16(Adapter, offset);
+ error = rtw_read16(Adapter, offset, (u16 *) &RegRWStruct->value);
+ if (error)
+ status = NDIS_STATUS_NOT_ACCEPTED;
break;
default:
width = 4;
diff --git a/drivers/staging/r8188eu/hal/odm_interface.c b/drivers/staging/r8188eu/hal/odm_interface.c
index 9a9df98da727..669d3e5eafb6 100644
--- a/drivers/staging/r8188eu/hal/odm_interface.c
+++ b/drivers/staging/r8188eu/hal/odm_interface.c
@@ -10,10 +10,10 @@ int ODM_Read1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u8 *data)
return rtw_read8(Adapter, RegAddr, data);
}
-u16 ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr)
+int ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u16 *data)
{
struct adapter *Adapter = pDM_Odm->Adapter;
- return rtw_read16(Adapter, RegAddr);
+ return rtw_read16(Adapter, RegAddr, data);
}
u32 ODM_Read4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index cfc429965b7d..94e2828c328e 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -262,7 +262,11 @@ static void efuse_read_phymap_from_txpktbuf(
* do not remove it as the rtw_read16() call consumes
* 2 bytes from the EEPROM source.
*/
- u16 lenc = rtw_read16(adapter, REG_PKTBUF_DBG_DATA_L);
+ u16 lenc;
+
+ error = rtw_read16(adapter, REG_PKTBUF_DBG_DATA_L, &lenc);
+ if (error)
+ return;
len = le32_to_cpu(lo32) & 0x0000ffff;
@@ -778,21 +782,27 @@ hal_EfusePowerSwitch_RTL8188E(
rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
/* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */
- tmpV16 = rtw_read16(pAdapter, REG_SYS_ISO_CTRL);
- if (!(tmpV16 & PWC_EV12V)) {
+ error = rtw_read16(pAdapter, REG_SYS_ISO_CTRL, &tmpV16);
+ if (error) {
+ return;
+ } else if (!(tmpV16 & PWC_EV12V)) {
tmpV16 |= PWC_EV12V;
rtw_write16(pAdapter, REG_SYS_ISO_CTRL, tmpV16);
}
/* Reset: 0x0000h[28], default valid */
- tmpV16 = rtw_read16(pAdapter, REG_SYS_FUNC_EN);
- if (!(tmpV16 & FEN_ELDR)) {
+ error = rtw_read16(pAdapter, REG_SYS_FUNC_EN, &tmpV16);
+ if (error) {
+ return;
+ } else if (!(tmpV16 & FEN_ELDR)) {
tmpV16 |= FEN_ELDR;
rtw_write16(pAdapter, REG_SYS_FUNC_EN, tmpV16);
}
/* Clock: Gated(0x0008h[5]) 8M(0x0008h[1]) clock from ANA, default valid */
- tmpV16 = rtw_read16(pAdapter, REG_SYS_CLKR);
- if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) {
+ error = rtw_read16(pAdapter, REG_SYS_CLKR, &tmpV16);
+ if (error) {
+ return;
+ } else if ((!(tmpV16 & LOADER_CLK_EN)) || (!(tmpV16 & ANA8M))) {
tmpV16 |= (LOADER_CLK_EN | ANA8M);
rtw_write16(pAdapter, REG_SYS_CLKR, tmpV16);
}
@@ -1915,8 +1925,11 @@ u8 GetEEPROMSize8188E(struct adapter *padapter)
{
u8 size = 0;
u32 cr;
+ int error;
- cr = rtw_read16(padapter, REG_9346CR);
+ error = rtw_read16(padapter, REG_9346CR, (u16 *) &cr);
+ if (error)
+ return size;
/* 6: EEPROM used is 93C46, 4: boot from E-Fuse. */
size = (cr & BOOT_FROM_EEPROM) ? 6 : 4;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index f6d4c91a97a2..3afb66195413 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -577,11 +577,14 @@ PHY_BBConfig8188E(
struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter);
u32 RegVal;
u8 CrystalCap;
+ int error;
phy_InitBBRFRegisterDefinition(Adapter);
/* Enable BB and RF */
- RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN);
+ error = rtw_read16(Adapter, REG_SYS_FUNC_EN, (u16 *) &RegVal);
+ if (error)
+ return _FAIL;
rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal | BIT(13) | BIT(0) | BIT(1)));
/* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 4f1d7f9b43c3..4ecccc6499aa 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -90,6 +90,8 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
u16 value16;
/* HW Power on sequence */
struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ int error;
+
if (haldata->bMacPwrCtrlOn)
return _SUCCESS;
@@ -103,7 +105,10 @@ static u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
rtw_write16(adapt, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */
/* Enable MAC DMA/WMAC/SCHEDULE/SEC block */
- value16 = rtw_read16(adapt, REG_CR);
+ error = rtw_read16(adapt, REG_CR, &value16);
+ if (error)
+ return _FAIL;
+
value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN
| PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN);
/* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */
@@ -207,7 +212,14 @@ static void _InitNormalChipRegPriority(struct adapter *Adapter, u16 beQ,
u16 bkQ, u16 viQ, u16 voQ, u16 mgtQ,
u16 hiQ)
{
- u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7);
+ u16 value16;
+ int error;
+
+ error = rtw_read16(Adapter, REG_TRXDMA_CTRL, &value16);
+ if (error)
+ return;
+
+ value16 &= 0x7;
value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) |
_TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) |
@@ -868,7 +880,12 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */
/* */
/* Enable MACTXEN/MACRXEN block */
- value16 = rtw_read16(Adapter, REG_CR);
+ error = rtw_read16(Adapter, REG_CR, &value16);
+ if (error) {
+ status = _FAIL;
+ goto exit;
+ }
+
value16 |= (MACTXEN | MACRXEN);
rtw_write8(Adapter, REG_CR, value16);
@@ -937,6 +954,8 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
Adapter->mppriv.channel = haldata->CurrentChannel;
MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel);
} else {
+ u16 val16;
+
/* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */
/* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */
/* call initstruct adapter. May cause some problem?? */
@@ -956,7 +975,13 @@ static u32 rtl8188eu_hal_init(struct adapter *Adapter)
rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
/* enable tx DMA to drop the redundate data of packet */
- rtw_write16(Adapter, REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter, REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN));
+ error = rtw_read16(Adapter, REG_TXDMA_OFFSET_CHK, &val16);
+ if (error) {
+ status = _FAIL;
+ goto exit;
+ }
+
+ rtw_write16(Adapter, REG_TXDMA_OFFSET_CHK, (val16 | DROP_DATA_EN));
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK);
/* 2010/08/26 MH Merge from 8192CE. */
@@ -1982,7 +2007,9 @@ static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
rtw_write8(Adapter, REG_TXPAUSE, 0xff);
/* keep sn */
- Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter, REG_NQOS_SEQ);
+ error = rtw_read16(Adapter, REG_NQOS_SEQ, &Adapter->xmitpriv.nqos_ssn);
+ if (error)
+ return;
if (!pwrpriv->bkeepfwalive) {
/* RX DMA stop */
diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index 380d126c8b2f..58e852555f54 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -126,19 +126,30 @@ static int usb_read8(struct intf_hdl *pintfhdl, u32 addr, u8 *data)
return res;
}
-static u16 usb_read16(struct intf_hdl *pintfhdl, u32 addr)
+static int usb_read16(struct intf_hdl *pintfhdl, u32 addr, u16 *data)
{
u8 requesttype;
u16 wvalue;
u16 len;
- __le32 data;
+ int res;
+ __le32 tmp;
+
+ if (WARN_ON(unlikely(!data)))
+ return -EINVAL;
requesttype = 0x01;/* read_in */
wvalue = (u16)(addr & 0x0000ffff);
len = 2;
- usbctrl_vendorreq(pintfhdl, wvalue, &data, len, requesttype);
+ res = usbctrl_vendorreq(pintfhdl, wvalue, &tmp, len, requesttype);
+ if (res < 0) {
+ dev_err(dvobj_to_dev(pintfhdl->pintf_dev), "Failed to read 16 bytes: %d\n", res);
+ } else {
+ /* Noone cares about positive return value */
+ *data = le32_to_cpu(tmp) & 0xffff;
+ res = 0;
+ }
- return (u16)(le32_to_cpu(data) & 0xffff);
+ return res;
}
static u32 usb_read32(struct intf_hdl *pintfhdl, u32 addr)
diff --git a/drivers/staging/r8188eu/include/odm_interface.h b/drivers/staging/r8188eu/include/odm_interface.h
index 8e531d272927..2455dae6eebb 100644
--- a/drivers/staging/r8188eu/include/odm_interface.h
+++ b/drivers/staging/r8188eu/include/odm_interface.h
@@ -62,7 +62,7 @@ typedef void (*RT_WORKITEM_CALL_BACK)(void *pContext);
int ODM_Read1Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u8 *data);
-u16 ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
+int ODM_Read2Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr, u16 *data);
u32 ODM_Read4Byte(struct odm_dm_struct *pDM_Odm, u32 RegAddr);
diff --git a/drivers/staging/r8188eu/include/rtw_io.h b/drivers/staging/r8188eu/include/rtw_io.h
index fd99b36abca6..c44554c848cf 100644
--- a/drivers/staging/r8188eu/include/rtw_io.h
+++ b/drivers/staging/r8188eu/include/rtw_io.h
@@ -86,7 +86,7 @@ struct io_queue;
struct _io_ops {
int (*_read8)(struct intf_hdl *pintfhdl, u32 addr, u8 *data);
- u16 (*_read16)(struct intf_hdl *pintfhdl, u32 addr);
+ int (*_read16)(struct intf_hdl *pintfhdl, u32 addr, u16 *data);
u32 (*_read32)(struct intf_hdl *pintfhdl, u32 addr);
int (*_write8)(struct intf_hdl *pintfhdl, u32 addr, u8 val);
int (*_write16)(struct intf_hdl *pintfhdl, u32 addr, u16 val);
@@ -249,7 +249,7 @@ void _rtw_attrib_read(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
void _rtw_attrib_write(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
int __must_check _rtw_read8(struct adapter *adapter, u32 addr, u8 *data);
-u16 _rtw_read16(struct adapter *adapter, u32 addr);
+int __must_check _rtw_read16(struct adapter *adapter, u32 addr, u16 *data);
u32 _rtw_read32(struct adapter *adapter, u32 addr);
void _rtw_read_mem(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
void _rtw_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
@@ -271,7 +271,7 @@ u32 _rtw_write_port_and_wait(struct adapter *adapter, u32 addr, u32 cnt,
void _rtw_write_port_cancel(struct adapter *adapter);
#define rtw_read8(adapter, addr, data) _rtw_read8((adapter), (addr), (data))
-#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
+#define rtw_read16(adapter, addr, data) _rtw_read16((adapter), (addr), (data))
#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
#define rtw_read_mem(adapter, addr, cnt, mem) \
_rtw_read_mem((adapter), (addr), (cnt), (mem))
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index c9f0772bcbe1..79f0fbaa841e 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -2101,7 +2101,10 @@ static int rtw_wx_read32(struct net_device *dev,
sprintf(extra, "0x%02X", data32);
break;
case 2:
- data32 = rtw_read16(padapter, addr);
+ error = rtw_read16(padapter, addr, (u16 *) &data32);
+ if (error)
+ return error;
+
sprintf(extra, "0x%04X", data32);
break;
case 4:
@@ -2271,7 +2274,8 @@ static void rtw_dbg_mode_hdl(struct adapter *padapter, u32 id, u8 *pdata, u32 le
(u8 *) &RegRWStruct->value);
break;
case 2:
- RegRWStruct->value = rtw_read16(padapter, RegRWStruct->offset);
+ error = rtw_read16(padapter, RegRWStruct->offset,
+ (u16 *) &RegRWStruct->value);
break;
case 4:
RegRWStruct->value = rtw_read32(padapter, RegRWStruct->offset);
@@ -3990,7 +3994,8 @@ static int rtw_dbg_port(struct net_device *dev,
DBG_88E("rtw_read8(0x%x) = 0x%02x\n", arg, (u8) tmp);
break;
case 2:
- DBG_88E("rtw_read16(0x%x) = 0x%04x\n", arg, rtw_read16(padapter, arg));
+ if (!rtw_read16(padapter, arg, (u16 *) &tmp))
+ DBG_88E("rtw_read16(0x%x) = 0x%04x\n", arg, (u16) tmp);
break;
case 4:
DBG_88E("rtw_read32(0x%x) = 0x%08x\n", arg, rtw_read32(padapter, arg));
@@ -4006,8 +4011,12 @@ static int rtw_dbg_port(struct net_device *dev,
break;
case 2:
+ error = rtw_read16(padapter, arg, (u16 *) &tmp);
+ if (error)
+ return error;
+
rtw_write16(padapter, arg, extra_arg);
- DBG_88E("rtw_write16(0x%x) = 0x%04x\n", arg, rtw_read16(padapter, arg));
+ DBG_88E("rtw_write16(0x%x) = 0x%04x\n", arg, (u16) tmp);
break;
case 4:
rtw_write32(padapter, arg, extra_arg);
@@ -4138,7 +4147,10 @@ static int rtw_dbg_port(struct net_device *dev,
if (_SUCCESS != rtw_IOL_exec_cmds_sync(padapter, xmit_frame, 5000, 0))
ret = -EPERM;
- final = rtw_read16(padapter, reg);
+ error = rtw_read16(padapter, reg, &final);
+ if (error)
+ return error;
+
if (start_value + write_num - 1 == final)
DBG_88E("continuous IOL_CMD_WW_REG to 0x%x %u times Success, start:%u, final:%u\n", reg, write_num, start_value, final);
else
@@ -5387,7 +5399,11 @@ static int rtw_mp_read_reg(struct net_device *dev,
break;
case 'w':
/* 2 bytes */
- sprintf(data, "%04x\n", rtw_read16(padapter, addr));
+ error = rtw_read16(padapter, addr, (u16 *) &val32);
+ if (error)
+ return error;
+
+ sprintf(data, "%04x\n", (u16) val32);
for (i = 0; i <= strlen(data); i++) {
if (i % 2 == 0) {
tmp[j] = ' ';
--
2.32.0
Powered by blists - more mailing lists