| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA=Fs0=p_wDV7Ag_pOVv1AweXSLYMMands5XihnLOU8oSQA-MA@mail.gmail.com>
Date: Mon, 23 Aug 2021 23:16:31 +0100
From: Phillip Potter <phil@...lpotter.co.uk>
To: Michael Straube <straube.linux@...il.com>
Cc: Greg KH <gregkh@...uxfoundation.org>,
Larry Finger <Larry.Finger@...inger.net>,
Martin Kaiser <martin@...ser.cx>,
"Fabio M. De Francesco" <fmdefrancesco@...il.com>,
"open list:STAGING SUBSYSTEM" <linux-staging@...ts.linux.dev>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] staging: r8188eu: remove if_ether.h header file
On Sun, 22 Aug 2021 at 17:45, Michael Straube <straube.linux@...il.com> wrote:
>
> All constants, declarations and macros in if_ether.h are either
> duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
> if_ether.h and its includes.
>
> Signed-off-by: Michael Straube <straube.linux@...il.com>
> ---
> drivers/staging/r8188eu/core/rtw_recv.c | 1 -
> drivers/staging/r8188eu/hal/rtl8188eu_recv.c | 1 -
> drivers/staging/r8188eu/include/if_ether.h | 94 --------------------
> drivers/staging/r8188eu/os_dep/xmit_linux.c | 1 -
> 4 files changed, 97 deletions(-)
> delete mode 100644 drivers/staging/r8188eu/include/if_ether.h
>
> diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
> index 52236bae8693..08066c9587f9 100644
> --- a/drivers/staging/r8188eu/core/rtw_recv.c
> +++ b/drivers/staging/r8188eu/core/rtw_recv.c
> @@ -8,7 +8,6 @@
> #include "../include/recv_osdep.h"
> #include "../include/mlme_osdep.h"
> #include "../include/ip.h"
> -#include "../include/if_ether.h"
> #include "../include/ethernet.h"
> #include "../include/usb_ops.h"
> #include "../include/wifi.h"
> diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> index a44c9598186c..3a2c7090cd7b 100644
> --- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> +++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
> @@ -7,7 +7,6 @@
> #include "../include/recv_osdep.h"
> #include "../include/mlme_osdep.h"
> #include "../include/ip.h"
> -#include "../include/if_ether.h"
> #include "../include/ethernet.h"
>
> #include "../include/usb_ops.h"
> diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
> deleted file mode 100644
> index 5bb79fddeec6..000000000000
> --- a/drivers/staging/r8188eu/include/if_ether.h
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
> -/* Copyright(c) 2007 - 2011 Realtek Corporation. */
> -
> -#ifndef _LINUX_IF_ETHER_H
> -#define _LINUX_IF_ETHER_H
> -
> -/*
> - * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
> - * and FCS/CRC (frame check sequence).
> - */
> -
> -#define ETH_ALEN 6 /* Octets in one ethernet addr */
> -#define ETH_HLEN 14 /* Total octets in header. */
> -#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
> -#define ETH_DATA_LEN 1500 /* Max. octets in payload */
> -#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
> -
> -/*
> - * These are the defined Ethernet Protocol ID's.
> - */
> -
> -#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
> -#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
> -#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
> -#define ETH_P_IP 0x0800 /* Internet Protocol packet */
> -#define ETH_P_X25 0x0805 /* CCITT X.25 */
> -#define ETH_P_ARP 0x0806 /* Address Resolution packet */
> -#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
> -#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
> -#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
> -#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
> -#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
> -#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
> -#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
> -#define ETH_P_LAT 0x6004 /* DEC LAT */
> -#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
> -#define ETH_P_CUST 0x6006 /* DEC Customer use */
> -#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
> -#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
> -#define ETH_P_ATALK 0x809B /* Appletalk DDP */
> -#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
> -#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
> -#define ETH_P_IPX 0x8137 /* IPX over DIX */
> -#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
> -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
> -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
> -#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
> -#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
> - * over Ethernet
> - */
> -
> -/*
> - * Non DIX types. Won't clash for 1500 types.
> - */
> -
> -#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
> -#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
> -#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
> -#define ETH_P_802_2 0x0004 /* 802.2 frames */
> -#define ETH_P_SNAP 0x0005 /* Internal only */
> -#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
> -#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
> -#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
> -#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
> -#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
> -#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
> -#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@...e.net) */
> -#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
> -#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
> -#define ETH_P_ECONET 0x0018 /* Acorn Econet */
> -
> -/*
> - * This is an Ethernet frame header.
> - */
> -
> -struct ethhdr {
> - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
> - unsigned char h_source[ETH_ALEN]; /* source ether addr */
> - unsigned short h_proto; /* packet type ID field */
> -};
> -
> -struct _vlan {
> - unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
> - unsigned short h_vlan_encapsulated_proto;
> -};
> -
> -#define get_vlan_id(pvlan) \
> - ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
> -#define get_vlan_priority(pvlan) \
> - ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
> -#define get_vlan_encap_proto(pvlan) \
> - (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
> -
> -#endif /* _LINUX_IF_ETHER_H */
> diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> index 60e0eea7ad84..d35e92c17a5e 100644
> --- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
> +++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
> @@ -5,7 +5,6 @@
>
> #include "../include/osdep_service.h"
> #include "../include/drv_types.h"
> -#include "../include/if_ether.h"
> #include "../include/ip.h"
> #include "../include/wifi.h"
> #include "../include/mlme_osdep.h"
> --
> 2.32.0
>
Built and runtime tested, thanks.
Acked-by: Phillip Potter <phil@...lpotter.co.uk>
Regards,
Phil
Powered by blists - more mailing lists