| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210823024750.702542-1-mailhol.vincent@wanadoo.fr>
Date: Mon, 23 Aug 2021 11:47:50 +0900
From: Vincent Mailhol <mailhol.vincent@...adoo.fr>
To: Marc Kleine-Budde <mkl@...gutronix.de>, linux-can@...r.kernel.org
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Subject: [PATCH v2] can: netlink: prevent incoherent can configuration in case of early return
struct can_priv has a set of flags (can_priv::ctrlmode) which are
correlated with the other fields of the structure. In
can_changelink(), those flags are set first and copied to can_priv. If
the function has to return early, for example due to an out of range
value provided by the user, then the global configuration might become
incoherent.
Example: the user provides an out of range dbitrate (e.g. 20
Mbps). The command fails (-EINVAL), however the FD flag was already
set resulting in a configuration where FD is on but the databittiming
parameters are empty.
* Illustration of above example *
| $ ip link set can0 type can bitrate 500000 dbitrate 20000000 fd on
| RTNETLINK answers: Invalid argument
| $ ip --details link show can0
| 1: can0: <NOARP,ECHO> mtu 72 qdisc noop state DOWN mode DEFAULT group default qlen 10
| link/can promiscuity 0 minmtu 0 maxmtu 0
| can <FD> state STOPPED restart-ms 0
^^ FD flag is set without any of the databittiming parameters...
| bitrate 500000 sample-point 0.875
| tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
To prevent this from happening, we do a local copy of can_priv, work
on it, an copy it at the very end of the function (i.e. only if all
previous checks succeeded).
Once this done, there is no more need to have a temporary variable for
a specific parameter. As such, the bittiming and data bittiming (bt
and dbt) are directly written to the temporary priv variable.
Finally, function can_calc_tdco() was retrieving can_priv from the
net_device and directly modifying it. We changed the prototype so that
it instead writes its changes into our temporary priv variable.
Signed-off-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
---
* Changelog *
v1 -> v2:
- Change the prototype of can_calc_tdco() so that the changes are
applied to the temporary priv instead of netdev_priv(dev).
---
drivers/net/can/dev/bittiming.c | 8 +--
drivers/net/can/dev/netlink.c | 88 +++++++++++++++++----------------
include/linux/can/bittiming.h | 7 ++-
3 files changed, 53 insertions(+), 50 deletions(-)
diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c
index f49170eadd54..bddd93e2e439 100644
--- a/drivers/net/can/dev/bittiming.c
+++ b/drivers/net/can/dev/bittiming.c
@@ -175,13 +175,9 @@ int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
return 0;
}
-void can_calc_tdco(struct net_device *dev)
+void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt)
{
- struct can_priv *priv = netdev_priv(dev);
- const struct can_bittiming *dbt = &priv->data_bittiming;
- struct can_tdc *tdc = &priv->tdc;
- const struct can_tdc_const *tdc_const = priv->tdc_const;
-
if (!tdc_const)
return;
diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index 80425636049d..50dfed462711 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -58,14 +58,20 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
struct nlattr *data[],
struct netlink_ext_ack *extack)
{
- struct can_priv *priv = netdev_priv(dev);
+ /* Work on a local copy of priv to prevent inconsistent value
+ * in case of early return. net/core/rtnetlink.c has a global
+ * mutex so using a static declaration is race free
+ */
+ static struct can_priv priv;
int err;
/* We need synchronization with dev->stop() */
ASSERT_RTNL();
+ memcpy(&priv, netdev_priv(dev), sizeof(priv));
+
if (data[IFLA_CAN_BITTIMING]) {
- struct can_bittiming bt;
+ struct can_bittiming *bt = &priv.bittiming;
/* Do not allow changing bittiming while running */
if (dev->flags & IFF_UP)
@@ -76,28 +82,26 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
* directly via do_set_bitrate(). Bail out if neither
* is given.
*/
- if (!priv->bittiming_const && !priv->do_set_bittiming)
+ if (!priv.bittiming_const && !priv.do_set_bittiming)
return -EOPNOTSUPP;
- memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
- err = can_get_bittiming(dev, &bt,
- priv->bittiming_const,
- priv->bitrate_const,
- priv->bitrate_const_cnt);
+ memcpy(bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(*bt));
+ err = can_get_bittiming(dev, bt,
+ priv.bittiming_const,
+ priv.bitrate_const,
+ priv.bitrate_const_cnt);
if (err)
return err;
- if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
+ if (priv.bitrate_max && bt->bitrate > priv.bitrate_max) {
netdev_err(dev, "arbitration bitrate surpasses transceiver capabilities of %d bps\n",
- priv->bitrate_max);
+ priv.bitrate_max);
return -EINVAL;
}
- memcpy(&priv->bittiming, &bt, sizeof(bt));
-
- if (priv->do_set_bittiming) {
+ if (priv.do_set_bittiming) {
/* Finally, set the bit-timing registers */
- err = priv->do_set_bittiming(dev);
+ err = priv.do_set_bittiming(dev);
if (err)
return err;
}
@@ -112,11 +116,11 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
if (dev->flags & IFF_UP)
return -EBUSY;
cm = nla_data(data[IFLA_CAN_CTRLMODE]);
- ctrlstatic = priv->ctrlmode_static;
+ ctrlstatic = priv.ctrlmode_static;
maskedflags = cm->flags & cm->mask;
/* check whether provided bits are allowed to be passed */
- if (maskedflags & ~(priv->ctrlmode_supported | ctrlstatic))
+ if (maskedflags & ~(priv.ctrlmode_supported | ctrlstatic))
return -EOPNOTSUPP;
/* do not check for static fd-non-iso if 'fd' is disabled */
@@ -128,16 +132,16 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
return -EOPNOTSUPP;
/* clear bits to be modified and copy the flag values */
- priv->ctrlmode &= ~cm->mask;
- priv->ctrlmode |= maskedflags;
+ priv.ctrlmode &= ~cm->mask;
+ priv.ctrlmode |= maskedflags;
/* CAN_CTRLMODE_FD can only be set when driver supports FD */
- if (priv->ctrlmode & CAN_CTRLMODE_FD) {
+ if (priv.ctrlmode & CAN_CTRLMODE_FD) {
dev->mtu = CANFD_MTU;
} else {
dev->mtu = CAN_MTU;
- memset(&priv->data_bittiming, 0,
- sizeof(priv->data_bittiming));
+ memset(&priv.data_bittiming, 0,
+ sizeof(priv.data_bittiming));
}
}
@@ -145,7 +149,7 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
/* Do not allow changing restart delay while running */
if (dev->flags & IFF_UP)
return -EBUSY;
- priv->restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
+ priv.restart_ms = nla_get_u32(data[IFLA_CAN_RESTART_MS]);
}
if (data[IFLA_CAN_RESTART]) {
@@ -158,7 +162,7 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
}
if (data[IFLA_CAN_DATA_BITTIMING]) {
- struct can_bittiming dbt;
+ struct can_bittiming *dbt = &priv.data_bittiming;
/* Do not allow changing bittiming while running */
if (dev->flags & IFF_UP)
@@ -169,31 +173,29 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
* directly via do_set_bitrate(). Bail out if neither
* is given.
*/
- if (!priv->data_bittiming_const && !priv->do_set_data_bittiming)
+ if (!priv.data_bittiming_const && !priv.do_set_data_bittiming)
return -EOPNOTSUPP;
- memcpy(&dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
- sizeof(dbt));
- err = can_get_bittiming(dev, &dbt,
- priv->data_bittiming_const,
- priv->data_bitrate_const,
- priv->data_bitrate_const_cnt);
+ memcpy(dbt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
+ sizeof(*dbt));
+ err = can_get_bittiming(dev, dbt,
+ priv.data_bittiming_const,
+ priv.data_bitrate_const,
+ priv.data_bitrate_const_cnt);
if (err)
return err;
- if (priv->bitrate_max && dbt.bitrate > priv->bitrate_max) {
+ if (priv.bitrate_max && dbt->bitrate > priv.bitrate_max) {
netdev_err(dev, "canfd data bitrate surpasses transceiver capabilities of %d bps\n",
- priv->bitrate_max);
+ priv.bitrate_max);
return -EINVAL;
}
- memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
-
- can_calc_tdco(dev);
+ can_calc_tdco(&priv.tdc, priv.tdc_const, &priv.data_bittiming);
- if (priv->do_set_data_bittiming) {
+ if (priv.do_set_data_bittiming) {
/* Finally, set the bit-timing registers */
- err = priv->do_set_data_bittiming(dev);
+ err = priv.do_set_data_bittiming(dev);
if (err)
return err;
}
@@ -201,28 +203,30 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
if (data[IFLA_CAN_TERMINATION]) {
const u16 termval = nla_get_u16(data[IFLA_CAN_TERMINATION]);
- const unsigned int num_term = priv->termination_const_cnt;
+ const unsigned int num_term = priv.termination_const_cnt;
unsigned int i;
- if (!priv->do_set_termination)
+ if (!priv.do_set_termination)
return -EOPNOTSUPP;
/* check whether given value is supported by the interface */
for (i = 0; i < num_term; i++) {
- if (termval == priv->termination_const[i])
+ if (termval == priv.termination_const[i])
break;
}
if (i >= num_term)
return -EINVAL;
/* Finally, set the termination value */
- err = priv->do_set_termination(dev, termval);
+ err = priv.do_set_termination(dev, termval);
if (err)
return err;
- priv->termination = termval;
+ priv.termination = termval;
}
+ memcpy(netdev_priv(dev), &priv, sizeof(priv));
+
return 0;
}
diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index 9de6e9053e34..b3c1711ee0f0 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -87,7 +87,8 @@ struct can_tdc_const {
int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
const struct can_bittiming_const *btc);
-void can_calc_tdco(struct net_device *dev);
+void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt);
#else /* !CONFIG_CAN_CALC_BITTIMING */
static inline int
can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
@@ -97,7 +98,9 @@ can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
return -EINVAL;
}
-static inline void can_calc_tdco(struct net_device *dev)
+static inline void
+can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
+ const struct can_bittiming *dbt)
{
}
#endif /* CONFIG_CAN_CALC_BITTIMING */
--
2.31.1
Powered by blists - more mailing lists