Message-ID: <b57c7272-2f84-dfde-65ba-ff71793f360e@somainline.org>
Date:   Tue, 24 Aug 2021 22:44:24 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: Re: [PATCH] arm64: dts: qcom: sdm660: Add initial IFC6560 board

Il 24/08/21 17:10, Bjorn Andersson ha scritto:
> The IFC6560 is a board from Inforce Computing, built around the SDA660
> SoC. This patch describes core clocks, some regulators from the two
> PMICs, debug uart, storage, bluetooth and audio DSP remoteproc.
> 
> The regulator settings are inherited from prior work by Konrad Dybcio
> and AngeloGioacchino Del Regno.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>

Nice!!!

Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>

> ---
>   arch/arm64/boot/dts/qcom/Makefile           |   1 +
>   arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts | 279 ++++++++++++++++++++
>   2 files changed, 280 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 70516508be56..88abcfeb4d38 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-ifc6560.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> new file mode 100644
> index 000000000000..2244529bc6bf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm660-ifc6560.dts
> @@ -0,0 +1,279 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Linaro Ltd.
> + * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@...ainline.org>
> + * Copyright (c) 2020, AngeloGioacchino Del Regno
> + *                     <angelogioacchino.delregno@...ainline.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm660.dtsi"
> +#include "pm660.dtsi"
> +#include "pm660l.dtsi"
> +
> +/ {
> +	model = "Inforce 6560 Single Board Computer";
> +	compatible = "inforce,ifc6560", "qcom,sdm660";
> +
> +	aliases {
> +		serial0 = &blsp1_uart2;
> +		serial1 = &blsp2_uart1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +	};
> +
> +	v3p3_bck_bst: v3p3-bck-bst-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "v3p3_bck_bst";
> +
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		vin-supply = <&vph_pwr>;
> +	};
> +
> +	v1p2_ldo: v1p2-ldo-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "v1p2_ldo";
> +
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +
> +		vin-supply = <&vph_pwr>;
> +	};
> +
> +	v5p0_boost: v5p0-boost-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "v5p0_boost";
> +
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +
> +		vin-supply = <&vph_pwr>;
> +	};
> +};
> +
> +&adsp_pil {
> +	firmware-name = "qcom/inforce/ifc6560/adsp.mbn";
> +};
> +
> +&blsp1_uart2 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart_active>;
> +};
> +
> +&blsp2_uart1 {
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn3990-bt";
> +
> +		vddio-supply = <&vreg_l13a_1p8>;
> +		vddxo-supply = <&vreg_l9a_1p8>;
> +		vddrf-supply = <&vreg_l6a_1p3>;
> +		vddch0-supply = <&vreg_l19a_3p3>;
> +		max-speed = <3200000>;
> +	};
> +};
> +
> +&rpm_requests {
> +	pm660-regulators {
> +		compatible = "qcom,rpm-pm660-regulators";
> +
> +		vdd_s1-supply = <&vph_pwr>;
> +		vdd_s2-supply = <&vph_pwr>;
> +		vdd_s3-supply = <&vph_pwr>;
> +		vdd_s4-supply = <&vph_pwr>;
> +		vdd_s5-supply = <&vph_pwr>;
> +		vdd_s6-supply = <&vph_pwr>;
> +
> +		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
> +		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
> +		vdd_l5-supply = <&vreg_s2b_1p05>;
> +		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
> +		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
> +
> +		vreg_s4a_2p04: s4 {
> +			regulator-min-microvolt = <2040000>;
> +			regulator-max-microvolt = <2040000>;
> +			regulator-enable-ramp-delay = <200>;
> +			regulator-ramp-delay = <0>;
> +			regulator-always-on;
> +		};
> +
> +		vreg_s5a_1p35: s5 {
> +			regulator-min-microvolt = <1224000>;
> +			regulator-max-microvolt = <1350000>;
> +			regulator-enable-ramp-delay = <200>;
> +			regulator-ramp-delay = <0>;
> +		};
> +
> +		vreg_l6a_1p3: l6 {
> +			regulator-min-microvolt = <1304000>;
> +			regulator-max-microvolt = <1368000>;
> +			regulator-allow-set-load;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +		};
> +
> +		vreg_l8a_1p8: l8 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-system-load = <325000>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l9a_1p8: l9 {
> +			regulator-min-microvolt = <1804000>;
> +			regulator-max-microvolt = <1896000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l13a_1p8: l13 {
> +			/* This gives power to the LPDDR4: never turn it off! */
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1944000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		vreg_l19a_3p3: l19 {
> +			regulator-min-microvolt = <3312000>;
> +			regulator-max-microvolt = <3400000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-allow-set-load;
> +		};
> +	};
> +
> +	pm660l-regulators {
> +		compatible = "qcom,rpm-pm660l-regulators";
> +
> +		vdd_s1-supply = <&vph_pwr>;
> +		vdd_s2-supply = <&vph_pwr>;
> +		vdd_s3_s4-supply = <&vph_pwr>;
> +		vdd_s5-supply = <&vph_pwr>;
> +		vdd_s6-supply = <&vph_pwr>;
> +
> +		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
> +		vdd_l2-supply = <&vreg_bob>;
> +		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
> +		vdd_l4_l6-supply = <&vreg_bob>;
> +		vdd_bob-supply = <&vph_pwr>;
> +
> +		vreg_s2b_1p05: s2 {
> +			regulator-min-microvolt = <1050000>;
> +			regulator-max-microvolt = <1050000>;
> +			regulator-enable-ramp-delay = <200>;
> +			regulator-ramp-delay = <0>;
> +		};
> +
> +		vreg_l2b_2p95: l2 {
> +			/*
> +			 * This regulator supports 1.648 - 3.104V on this board
> +			 * but we set a max voltage of anything less than 2.7V
> +			 * to satisfy a condition in sdhci.c that will disable
> +			 * 3.3V SDHCI signaling, which happens to be not really
> +			 * supported on the Xperia Nile/Ganges platform.
> +			 */
> +			regulator-min-microvolt = <1648000>;
> +			regulator-max-microvolt = <2696000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l4b_29p5: l4 {
> +			regulator-min-microvolt = <2944000>;
> +			regulator-max-microvolt = <2952000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +
> +			regulator-min-microamp = <200>;
> +			regulator-max-microamp = <600000>;
> +			regulator-system-load = <570000>;
> +			regulator-allow-set-load;
> +		};
> +
> +		vreg_l5b_29p5: l5 {
> +			/*
> +			 * Downstream specifies a range of 1721-3600mV,
> +			 * but the only assigned consumers are SDHCI2 VMMC
> +			 * and Coresight QPDI that both request pinned 2.95V.
> +			 * Tighten the range to 1.8-3.328 (closest to 3.3) to
> +			 * make the mmc driver happy.
> +			 */
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3328000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +			regulator-allow-set-load;
> +			regulator-system-load = <800000>;
> +		};
> +
> +		vreg_l8b_3p3: l8 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <3400000>;
> +			regulator-enable-ramp-delay = <250>;
> +			regulator-ramp-delay = <0>;
> +		};
> +
> +		vreg_bob: bob {
> +			regulator-min-microvolt = <3304000>;
> +			regulator-max-microvolt = <3624000>;
> +			regulator-enable-ramp-delay = <500>;
> +			regulator-ramp-delay = <0>;
> +		};
> +	};
> +};
> +
> +&sdhc_1 {
> +	status = "okay";
> +	supports-cqe;
> +
> +	mmc-ddr-1_8v;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +
> +	vmmc-supply = <&vreg_l4b_29p5>;
> +	vqmmc-supply = <&vreg_l8a_1p8>;
> +};
> +
> +&sdhc_2 {
> +	status = "okay";
> +
> +	vmmc-supply = <&vreg_l5b_29p5>;
> +	vqmmc-supply = <&vreg_l2b_2p95>;
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <8 4>;
> +
> +	uart_active: uart-active-state {
> +		pins = "gpio4", "gpio5";
> +		function = "blsp_uart2";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +};
> 

Powered by blists - more mailing lists