| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210824092745.2093640-3-zhang.lyra@gmail.com>
Date: Tue, 24 Aug 2021 17:27:44 +0800
From: Chunyan Zhang <zhang.lyra@...il.com>
To: Mark Brown <broonie@...nel.org>, Rob Herring <robh+dt@...nel.org>
Cc: linux-spi@...r.kernel.org, devicetree@...r.kernel.org,
Baolin Wang <baolin.wang7@...il.com>,
Orson Zhai <orsonzhai@...il.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Chunyan Zhang <chunyan.zhang@...soc.com>,
Luting Guo <luting.guo@...soc.com>,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/3] dt-bindings: spi: Convert sprd ADI bindings to yaml
From: Chunyan Zhang <chunyan.zhang@...soc.com>
Convert spi-sprd-adi.txt to yaml.
Signed-off-by: Chunyan Zhang <chunyan.zhang@...soc.com>
---
.../devicetree/bindings/spi/spi-sprd-adi.txt | 63 ------------
.../devicetree/bindings/spi/sprd,spi-adi.yaml | 99 +++++++++++++++++++
2 files changed, 99 insertions(+), 63 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
create mode 100644 Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
deleted file mode 100644
index 2567c829e2dc..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Spreadtrum ADI controller
-
-ADI is the abbreviation of Anolog-Digital interface, which is used to access
-analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
-framework for its hardware implementation is alike to SPI bus and its timing
-is compatile to SPI timing.
-
-ADI controller has 50 channels including 2 software read/write channels and
-48 hardware channels to access analog chip. For 2 software read/write channels,
-users should set ADI registers to access analog chip. For hardware channels,
-we can configure them to allow other hardware components to use it independently,
-which means we can just link one analog chip address to one hardware channel,
-then users can access the mapped analog chip address by this hardware channel
-triggered by hardware components instead of ADI software channels.
-
-Thus we introduce one property named "sprd,hw-channels" to configure hardware
-channels, the first value specifies the hardware channel id which is used to
-transfer data triggered by hardware automatically, and the second value specifies
-the analog chip address where user want to access by hardware components.
-
-Since we have multi-subsystems will use unique ADI to access analog chip, when
-one system is reading/writing data by ADI software channels, that should be under
-one hardware spinlock protection to prevent other systems from reading/writing
-data by ADI software channels at the same time, or two parallel routine of setting
-ADI registers will make ADI controller registers chaos to lead incorrect results.
-Then we need one hardware spinlock to synchronize between the multiple subsystems.
-
-The new version ADI controller supplies multiple master channels for different
-subsystem accessing, that means no need to add hardware spinlock to synchronize,
-thus change the hardware spinlock support to be optional to keep backward
-compatibility.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-adi".
-- reg: Offset and length of ADI-SPI controller register space.
-- #address-cells: Number of cells required to define a chip select address
- on the ADI-SPI bus. Should be set to 1.
-- #size-cells: Size of cells required to define a chip select address size
- on the ADI-SPI bus. Should be set to 0.
-
-Optional properties:
-- hwlocks: Reference to a phandle of a hwlock provider node.
-- hwlock-names: Reference to hwlock name strings defined in the same order
- as the hwlocks, should be "adi".
-- sprd,hw-channels: This is an array of channel values up to 49 channels.
- The first value specifies the hardware channel id which is used to
- transfer data triggered by hardware automatically, and the second
- value specifies the analog chip address where user want to access
- by hardware components.
-
-SPI slave nodes must be children of the SPI controller node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
- adi_bus: spi@...30000 {
- compatible = "sprd,sc9860-adi";
- reg = <0 0x40030000 0 0x10000>;
- hwlocks = <&hwlock1 0>;
- hwlock-names = "adi";
- #address-cells = <1>;
- #size-cells = <0>;
- sprd,hw-channels = <30 0x8c20>;
- };
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
new file mode 100644
index 000000000000..f464fb6033f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum ADI controller
+
+maintainers:
+ - Orson Zhai <orsonzhai@...il.com>
+ - Baolin Wang <baolin.wang7@...il.com>
+ - Chunyan Zhang <zhang.lyra@...il.com>
+
+description: |
+ ADI is the abbreviation of Anolog-Digital interface, which is used to access
+ analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+ framework for its hardware implementation is alike to SPI bus and its timing
+ is compatile to SPI timing.
+
+ ADI controller has 50 channels including 2 software read/write channels and
+ 48 hardware channels to access analog chip. For 2 software read/write channels,
+ users should set ADI registers to access analog chip. For hardware channels,
+ we can configure them to allow other hardware components to use it independently,
+ which means we can just link one analog chip address to one hardware channel,
+ then users can access the mapped analog chip address by this hardware channel
+ triggered by hardware components instead of ADI software channels.
+
+ Thus we introduce one property named "sprd,hw-channels" to configure hardware
+ channels, the first value specifies the hardware channel id which is used to
+ transfer data triggered by hardware automatically, and the second value specifies
+ the analog chip address where user want to access by hardware components.
+
+ Since we have multi-subsystems will use unique ADI to access analog chip, when
+ one system is reading/writing data by ADI software channels, that should be under
+ one hardware spinlock protection to prevent other systems from reading/writing
+ data by ADI software channels at the same time, or two parallel routine of setting
+ ADI registers will make ADI controller registers chaos to lead incorrect results.
+ Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+ The new version ADI controller supplies multiple master channels for different
+ subsystem accessing, that means no need to add hardware spinlock to synchronize,
+ thus change the hardware spinlock support to be optional to keep backward
+ compatibility.
+
+allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc9860-adi
+
+ reg:
+ maxItems: 1
+
+ hwlocks:
+ description: Reference to a phandle of a hwlock provider node.
+
+ hwlock-names:
+ description: |
+ Reference to hwlock name strings defined in the same order
+ as the hwlocks, should be "adi".
+
+ sprd,hw-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+ description: |
+ This is an array of channel values up to 49 channels.
+ The first value specifies the hardware channel id which is used to
+ transfer data triggered by hardware automatically, and the second
+ value specifies the analog chip address where user want to access
+ by hardware components.
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ aon {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ adi_bus: spi@...30000 {
+ compatible = "sprd,sc9860-adi";
+ reg = <0 0x40030000 0 0x10000>;
+ hwlocks = <&hwlock1 0>;
+ hwlock-names = "adi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sprd,hw-channels = <30 0x8c20>;
+ };
+ };
+...
--
2.25.1
Powered by blists - more mailing lists