linux-kernel - [PATCH 3/3] xhci: Set HCD flag to defer primary roothub registration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210825105132.10420-4-kishon@ti.com>
Date:   Wed, 25 Aug 2021 16:21:32 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        Alan Stern <stern@...land.harvard.edu>
CC:     <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <chris.chiu@...onical.com>, Kishon Vijay Abraham I <kishon@...com>,
        <lokeshvutla@...com>
Subject: [PATCH 3/3] xhci: Set HCD flag to defer primary roothub registration

Set "HCD_FLAG_DEFER_PRI_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
Suggested-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
---
 drivers/usb/host/xhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3618070eba78..9b7d968022c8 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -644,7 +644,6 @@ int xhci_run(struct usb_hcd *hcd)
 	/* Start the xHCI host controller running only after the USB 2.0 roothub
 	 * is setup.
 	 */
-
 	hcd->uses_new_polling = 1;
 	if (!usb_hcd_is_primary_hcd(hcd))
 		return xhci_run_finished(xhci);
@@ -692,6 +691,7 @@ int xhci_run(struct usb_hcd *hcd)
 		if (ret)
 			xhci_free_command(xhci, command);
 	}
+	set_bit(HCD_FLAG_DEFER_PRI_RH_REGISTER, &hcd->flags);
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB2 roothub");
 
-- 
2.17.1