| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAGXv+5GF6e+uo31TaStjsR_baJC2Tug_zkaZpw_Ww76HBV0aSQ@mail.gmail.com>
Date: Wed, 25 Aug 2021 19:26:21 +0800
From: Chen-Yu Tsai <wenst@...omium.org>
To: Chun-Jie Chen <chun-jie.chen@...iatek.com>,
Stephen Boyd <sboyd@...nel.org>
Cc: Matthias Brugger <matthias.bgg@...il.com>,
Nicolas Boichat <drinkcat@...omium.org>,
Rob Herring <robh+dt@...nel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>, linux-clk@...r.kernel.org,
Devicetree List <devicetree@...r.kernel.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH 20/22] clk: mediatek: Add MT8195 wpesys clock support
On Thu, Jun 17, 2021 at 7:12 AM Chun-Jie Chen
<chun-jie.chen@...iatek.com> wrote:
>
> Add MT8195 wpesys clock providers
>
> Signed-off-by: Chun-Jie Chen <chun-jie.chen@...iatek.com>
> ---
> drivers/clk/mediatek/Kconfig | 6 ++
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mt8195-wpe.c | 145 ++++++++++++++++++++++++++
> 3 files changed, 152 insertions(+)
> create mode 100644 drivers/clk/mediatek/clk-mt8195-wpe.c
>
> diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
> index 91b1c19da1ab..5089bacdf0a5 100644
> --- a/drivers/clk/mediatek/Kconfig
> +++ b/drivers/clk/mediatek/Kconfig
> @@ -678,6 +678,12 @@ config COMMON_CLK_MT8195_VPPSYS1
> help
> This driver supports MediaTek MT8195 vppsys1 clocks.
>
> +config COMMON_CLK_MT8195_WPESYS
> + bool "Clock driver for MediaTek MT8195 wpesys"
> + depends on COMMON_CLK_MT8195
> + help
> + This driver supports MediaTek MT8195 wpesys clocks.
> +
> config COMMON_CLK_MT8516
> bool "Clock driver for MediaTek MT8516"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index fbf57473bb91..32cfb0030d92 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -96,5 +96,6 @@ obj-$(CONFIG_COMMON_CLK_MT8195_VDOSYS1) += clk-mt8195-vdo1.o
> obj-$(CONFIG_COMMON_CLK_MT8195_VENCSYS) += clk-mt8195-venc.o
> obj-$(CONFIG_COMMON_CLK_MT8195_VPPSYS0) += clk-mt8195-vpp0.o
> obj-$(CONFIG_COMMON_CLK_MT8195_VPPSYS1) += clk-mt8195-vpp1.o
> +obj-$(CONFIG_COMMON_CLK_MT8195_WPESYS) += clk-mt8195-wpe.o
> obj-$(CONFIG_COMMON_CLK_MT8516) += clk-mt8516.o
> obj-$(CONFIG_COMMON_CLK_MT8516_AUDSYS) += clk-mt8516-aud.o
> diff --git a/drivers/clk/mediatek/clk-mt8195-wpe.c b/drivers/clk/mediatek/clk-mt8195-wpe.c
> new file mode 100644
> index 000000000000..99e8b1297ef7
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8195-wpe.c
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2021 MediaTek Inc.
> +// Author: Chun-Jie Chen <chun-jie.chen@...iatek.com>
> +
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-mtk.h"
> +#include "clk-gate.h"
> +
> +#include <dt-bindings/clock/mt8195-clk.h>
> +
> +static const struct mtk_gate_regs wpe_cg_regs = {
> + .set_ofs = 0x0,
> + .clr_ofs = 0x0,
> + .sta_ofs = 0x0,
> +};
> +
> +static const struct mtk_gate_regs wpe_vpp0_cg_regs = {
> + .set_ofs = 0x58,
> + .clr_ofs = 0x58,
> + .sta_ofs = 0x58,
> +};
> +
> +static const struct mtk_gate_regs wpe_vpp1_cg_regs = {
> + .set_ofs = 0x5c,
> + .clr_ofs = 0x5c,
> + .sta_ofs = 0x5c,
> +};
> +
> +#define GATE_WPE(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &wpe_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_WPE_VPP0(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &wpe_vpp0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +#define GATE_WPE_VPP1(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &wpe_vpp1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +static const struct mtk_gate wpe_clks[] = {
> + GATE_WPE(CLK_WPE_VPP0, "wpe_vpp0", "wpe_vpp_sel", 16),
> + GATE_WPE(CLK_WPE_VPP1, "wpe_vpp1", "wpe_vpp_sel", 17),
> + GATE_WPE(CLK_WPE_SMI_LARB7, "wpe_smi_larb7", "wpe_vpp_sel", 18),
> + GATE_WPE(CLK_WPE_SMI_LARB8, "wpe_smi_larb8", "wpe_vpp_sel", 19),
> + GATE_WPE(CLK_WPE_EVENT_TX, "wpe_event_tx", "wpe_vpp_sel", 20),
> + GATE_WPE(CLK_WPE_SMI_LARB7_P, "wpe_smi_larb7_p", "wpe_vpp_sel", 24),
> + GATE_WPE(CLK_WPE_SMI_LARB8_P, "wpe_smi_larb8_p", "wpe_vpp_sel", 25),
> +};
> +
> +static const struct mtk_gate wpe_vpp0_clks[] = {
> + /* WPE_VPP0 */
> + GATE_WPE_VPP0(CLK_WPE_VPP0_VGEN, "wpe_vpp0_vgen", "img_sel", 0),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_EXT, "wpe_vpp0_ext", "img_sel", 1),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_VFC, "wpe_vpp0_vfc", "img_sel", 2),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH0_TOP, "wpe_vpp0_cach0_top", "img_sel", 3),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH0_DMA, "wpe_vpp0_cach0_dma", "img_sel", 4),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH1_TOP, "wpe_vpp0_cach1_top", "img_sel", 5),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH1_DMA, "wpe_vpp0_cach1_dma", "img_sel", 6),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH2_TOP, "wpe_vpp0_cach2_top", "img_sel", 7),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH2_DMA, "wpe_vpp0_cach2_dma", "img_sel", 8),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH3_TOP, "wpe_vpp0_cach3_top", "img_sel", 9),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_CACH3_DMA, "wpe_vpp0_cach3_dma", "img_sel", 10),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_PSP, "wpe_vpp0_psp", "img_sel", 11),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_PSP2, "wpe_vpp0_psp2", "img_sel", 12),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_SYNC, "wpe_vpp0_sync", "img_sel", 13),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_C24, "wpe_vpp0_c24", "img_sel", 14),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_MDP_CROP, "wpe_vpp0_mdp_crop", "img_sel", 15),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_ISP_CROP, "wpe_vpp0_isp_crop", "img_sel", 16),
> + GATE_WPE_VPP0(CLK_WPE_VPP0_TOP, "wpe_vpp0_top", "img_sel", 17),
> + /* WPE_VPP1 */
> + GATE_WPE_VPP1(CLK_WPE_VPP0_VECI, "wpe_vpp0_veci", "img_sel", 0),
> + GATE_WPE_VPP1(CLK_WPE_VPP0_VEC2I, "wpe_vpp0_vec2i", "img_sel", 1),
> + GATE_WPE_VPP1(CLK_WPE_VPP0_VEC3I, "wpe_vpp0_vec3i", "img_sel", 2),
> + GATE_WPE_VPP1(CLK_WPE_VPP0_WPEO, "wpe_vpp0_wpeo", "img_sel", 3),
> + GATE_WPE_VPP1(CLK_WPE_VPP0_MSKO, "wpe_vpp0_msko", "img_sel", 4),
> +};
> +
> +static const struct mtk_gate wpe_vpp1_clks[] = {
> + /* WPE_VPP0 */
> + GATE_WPE_VPP0(CLK_WPE_VPP1_VGEN, "wpe_vpp1_vgen", "img_sel", 0),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_EXT, "wpe_vpp1_ext", "img_sel", 1),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_VFC, "wpe_vpp1_vfc", "img_sel", 2),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH0_TOP, "wpe_vpp1_cach0_top", "img_sel", 3),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH0_DMA, "wpe_vpp1_cach0_dma", "img_sel", 4),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH1_TOP, "wpe_vpp1_cach1_top", "img_sel", 5),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH1_DMA, "wpe_vpp1_cach1_dma", "img_sel", 6),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH2_TOP, "wpe_vpp1_cach2_top", "img_sel", 7),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH2_DMA, "wpe_vpp1_cach2_dma", "img_sel", 8),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH3_TOP, "wpe_vpp1_cach3_top", "img_sel", 9),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_CACH3_DMA, "wpe_vpp1_cach3_dma", "img_sel", 10),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_PSP, "wpe_vpp1_psp", "img_sel", 11),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_PSP2, "wpe_vpp1_psp2", "img_sel", 12),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_SYNC, "wpe_vpp1_sync", "img_sel", 13),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_C24, "wpe_vpp1_c24", "img_sel", 14),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_MDP_CROP, "wpe_vpp1_mdp_crop", "img_sel", 15),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_ISP_CROP, "wpe_vpp1_isp_crop", "img_sel", 16),
> + GATE_WPE_VPP0(CLK_WPE_VPP1_TOP, "wpe_vpp1_top", "img_sel", 17),
> + /* WPE_VPP1 */
> + GATE_WPE_VPP1(CLK_WPE_VPP1_VECI, "wpe_vpp1_veci", "img_sel", 0),
> + GATE_WPE_VPP1(CLK_WPE_VPP1_VEC2I, "wpe_vpp1_vec2i", "img_sel", 1),
> + GATE_WPE_VPP1(CLK_WPE_VPP1_VEC3I, "wpe_vpp1_vec3i", "img_sel", 2),
> + GATE_WPE_VPP1(CLK_WPE_VPP1_WPEO, "wpe_vpp1_wpeo", "img_sel", 3),
> + GATE_WPE_VPP1(CLK_WPE_VPP1_MSKO, "wpe_vpp1_msko", "img_sel", 4),
> +};
> +
> +static const struct mtk_clk_desc wpe_desc = {
> + .clks = wpe_clks,
> + .num_clks = ARRAY_SIZE(wpe_clks),
> +};
> +
> +static const struct mtk_clk_desc wpe_vpp0_desc = {
> + .clks = wpe_vpp0_clks,
> + .num_clks = ARRAY_SIZE(wpe_vpp0_clks),
> +};
> +
> +static const struct mtk_clk_desc wpe_vpp1_desc = {
> + .clks = wpe_vpp1_clks,
> + .num_clks = ARRAY_SIZE(wpe_vpp1_clks),
> +};
> +
> +static const struct of_device_id of_match_clk_mt8195_wpe[] = {
> + {
> + .compatible = "mediatek,mt8195-wpesys",
> + .data = &wpe_desc,
> + }, {
> + .compatible = "mediatek,mt8195-wpesys_vpp0",
> + .data = &wpe_vpp0_desc,
> + }, {
> + .compatible = "mediatek,mt8195-wpesys_vpp1",
> + .data = &wpe_vpp1_desc,
Same comment as vencsys patch: wpesys_vpp0 and wpesys_vpp1 look the same.
Are they identical hardware blocks? Are different compatible strings
really needed?
I suggest adding clock-output-names to the device tree, and patching
mtk_clk_register_gates_with_dev() to try to get a clock name from the
device tree, and falling back to the predefined name in the list.
Something like:
<---------------
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index 74890759e98c..71e856c22960 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -125,11 +125,15 @@ int mtk_clk_register_gates_with_dev(struct
device_node *node,
for (i = 0; i < num; i++) {
const struct mtk_gate *gate = &clks[i];
+ const char *name = gate->name;
if (!IS_ERR_OR_NULL(clk_data->clks[gate->id]))
continue;
- clk = mtk_clk_register_gate(gate->name, gate->parent_name,
+ of_property_read_string(node, "clock-output-names", gate->id,
+ &name);
+
+ clk = mtk_clk_register_gate(name, gate->parent_name,
regmap,
gate->regs->set_ofs,
gate->regs->clr_ofs,
<---------------
(tabs replaced with spaces, do not apply directly)
ChenYu
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static struct platform_driver clk_mt8195_wpe_drv = {
> + .probe = mtk_clk_simple_probe,
> + .driver = {
> + .name = "clk-mt8195-wpe",
> + .of_match_table = of_match_clk_mt8195_wpe,
> + },
> +};
> +
> +builtin_platform_driver(clk_mt8195_wpe_drv);
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists