linux-kernel - [PATCH] mtd: rawnand: qcom: Update code word value for raw read

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 26 Aug 2021 16:01:02 +0530
From:   Md Sadre Alam <mdalam@...eaurora.org>
To:     miquel.raynal@...tlin.com, mani@...nel.org,
        boris.brezillon@...labora.com, linux-mtd@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Cc:     mdalam@...eaurora.org, sricharan@...eaurora.org
Subject: [PATCH] mtd: rawnand: qcom: Update code word value for raw read

>From QPIC V2 onwards there is a separate register to read
last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".

qcom_nandc_read_cw_raw() is used to read only one code word
at a time. If we will configure number of code words to 1 in
in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks
its reading the last code word, since from QPIC V2 onwards
we are having separate register to read the last code word,
we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n"
register to fetch data from controller buffer to system
memory.

Signed-off-by: Md Sadre Alam <mdalam@...eaurora.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index ef0bade..04e6f7b 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int data_size1, data_size2, oob_size1, oob_size2;
 	int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
+	int raw_cw = cw;
 
 	nand_read_page_op(chip, page, 0, NULL, 0);
 	host->use_ecc = false;
 
+	if (nandc->props->qpic_v2)
+		raw_cw = ecc->steps - 1;
+
 	clear_bam_transaction(nandc);
 	set_address(host, host->cw_size * cw, page);
-	update_rw_regs(host, 1, true, cw);
+	update_rw_regs(host, 1, true, raw_cw);
 	config_nand_page_read(chip);
 
 	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
@@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
-	config_nand_cw_read(chip, false, cw);
+	config_nand_cw_read(chip, false, raw_cw);
 
 	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 	reg_off += data_size1;
-- 
2.7.4