lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <s5h35qwwfds.wl-tiwai@suse.de>
Date:   Thu, 26 Aug 2021 14:37:51 +0200
From:   Takashi Iwai <tiwai@...e.de>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Mathias Nyman <mathias.nyman@...el.com>,
        Moritz Fischer <mdf@...nel.org>, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] usb: renesas-xhci: Prefer firmware loading on unknown ROM state

On Thu, 26 Aug 2021 14:21:46 +0200,
Greg Kroah-Hartman wrote:
> 
> On Thu, Aug 26, 2021 at 01:55:54PM +0200, Takashi Iwai wrote:
> > On Thu, 26 Aug 2021 13:50:13 +0200,
> > Greg Kroah-Hartman wrote:
> > > 
> > > On Thu, Aug 19, 2021 at 01:34:27PM +0200, Takashi Iwai wrote:
> > > > The recent attempt to handle an unknown ROM state in the commit
> > > > d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state")
> > > > resulted in a regression and reverted later by the commit 44cf53602f5a
> > > > ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"").
> > > > The problem of the former fix was that it treated the failure of
> > > > firmware loading as a fatal error.  Since the firmware files aren't
> > > > included in the standard linux-firmware tree, most users don't have
> > > > them, hence they got the non-working system after that.  The revert
> > > > fixed the regression, but also it didn't make the firmware loading
> > > > triggered even on the devices that do need it.  So we need still a fix
> > > > for them.
> > > > 
> > > > This is another attempt to handle the unknown ROM state.  Like the
> > > > previous fix, this also tries to load the firmware when ROM shows
> > > > unknown state.  In this patch, however, the failure of a firmware
> > > > loading (such as a missing firmware file) isn't handled as a fatal
> > > > error any longer when ROM has been already detected, but it falls back
> > > > to the ROM mode like before.  The error is returned only when no ROM
> > > > is detected and the firmware loading failed.
> > > > 
> > > > Along with it, for simplifying the code flow, the detection and the
> > > > check of ROM is factored out from renesas_fw_check_running() and done
> > > > in the caller side, renesas_xhci_check_request_fw().  It avoids the
> > > > redundant ROM checks.
> > > > 
> > > > The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34).  Also it
> > > > was confirmed that no regression is seen on another Thinkpad T14
> > > > machine that has worked without the patch, too.
> > > > 
> > > > Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"")
> > > > BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207
> > > > Signed-off-by: Takashi Iwai <tiwai@...e.de>
> > > > ---
> > > >  drivers/usb/host/xhci-pci-renesas.c | 35 +++++++++++++++++++----------
> > > >  1 file changed, 23 insertions(+), 12 deletions(-)
> > > 
> > > This does not apply to my usb-linus branch, are you sure it is still
> > > needed in Linus's tree right now?
> > 
> > I guess we can postpone for 5.15.  The patch was written for the code
> > on linux-next, and I see there have been a few code clean up there.
> > 
> > But the patch itself could be applied to Linus tree with a slight
> > fuzz, so the stable backport should be fine.
> > 
> > If it's still not cleanly applicable, let me know.  I'll refresh the
> > patch for whatever preferred branch.
> 
> It was not cleanly applicable, 'git am' did not like it against my
> usb-linus branch (which is 5.14-rc7 + a few other USB patches not in
> this driver).
> 
> So if you want to rebase it against that, I will be glad to take it for
> 5.14-final to resolve this issue.

OK, then let me resubmit.  Wait for a minute...


thanks,

Takashi

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ