lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1630070917-9896-12-git-send-email-ross.philipson@oracle.com>
Date:   Fri, 27 Aug 2021 09:28:34 -0400
From:   Ross Philipson <ross.philipson@...cle.com>
To:     linux-kernel@...r.kernel.org, x86@...nel.org,
        iommu@...ts.linux-foundation.org, linux-integrity@...r.kernel.org,
        linux-doc@...r.kernel.org
Cc:     ross.philipson@...cle.com, dpsmith@...rtussolutions.com,
        tglx@...utronix.de, mingo@...hat.com, bp@...en8.de, hpa@...or.com,
        luto@...capital.net, kanth.ghatraju@...cle.com,
        trenchboot-devel@...glegroups.com
Subject: [PATCH v4 11/14] kexec: Secure Launch kexec SEXIT support

Prior to running the next kernel via kexec, the Secure Launch code
closes down private SMX resources and does an SEXIT. This allows the
next kernel to start normally without any issues starting the APs etc.

Signed-off-by: Ross Philipson <ross.philipson@...cle.com>
---
 arch/x86/kernel/slaunch.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++
 kernel/kexec_core.c       |  4 +++
 2 files changed, 75 insertions(+)

diff --git a/arch/x86/kernel/slaunch.c b/arch/x86/kernel/slaunch.c
index f91f0b5..60a193a 100644
--- a/arch/x86/kernel/slaunch.c
+++ b/arch/x86/kernel/slaunch.c
@@ -458,3 +458,74 @@ void __init slaunch_setup_txt(void)
 
 	pr_info("Intel TXT setup complete\n");
 }
+
+static inline void smx_getsec_sexit(void)
+{
+	asm volatile (".byte 0x0f,0x37\n"
+		      : : "a" (SMX_X86_GETSEC_SEXIT));
+}
+
+void slaunch_finalize(int do_sexit)
+{
+	void __iomem *config;
+	u64 one = TXT_REGVALUE_ONE, val;
+
+	if ((slaunch_get_flags() & (SL_FLAG_ACTIVE|SL_FLAG_ARCH_TXT)) !=
+	    (SL_FLAG_ACTIVE|SL_FLAG_ARCH_TXT))
+		return;
+
+	config = ioremap(TXT_PRIV_CONFIG_REGS_BASE, TXT_NR_CONFIG_PAGES *
+			 PAGE_SIZE);
+	if (!config) {
+		pr_emerg("Error SEXIT failed to ioremap TXT private reqs\n");
+		return;
+	}
+
+	/* Clear secrets bit for SEXIT */
+	memcpy_toio(config + TXT_CR_CMD_NO_SECRETS, &one, sizeof(one));
+	memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+	/* Unlock memory configurations */
+	memcpy_toio(config + TXT_CR_CMD_UNLOCK_MEM_CONFIG, &one, sizeof(one));
+	memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+	/* Close the TXT private register space */
+	memcpy_toio(config + TXT_CR_CMD_CLOSE_PRIVATE, &one, sizeof(one));
+	memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+	/*
+	 * Calls to iounmap are not being done because of the state of the
+	 * system this late in the kexec process. Local IRQs are disabled and
+	 * iounmap causes a TLB flush which in turn causes a warning. Leaving
+	 * thse mappings is not an issue since the next kernel is going to
+	 * completely re-setup memory management.
+	 */
+
+	/* Map public registers and do a final read fence */
+	config = ioremap(TXT_PUB_CONFIG_REGS_BASE, TXT_NR_CONFIG_PAGES *
+			 PAGE_SIZE);
+	if (!config) {
+		pr_emerg("Error SEXIT failed to ioremap TXT public reqs\n");
+		return;
+	}
+
+	memcpy_fromio(&val, config + TXT_CR_E2STS, sizeof(val));
+
+	pr_emerg("TXT clear secrets bit and unlock memory complete.");
+
+	if (!do_sexit)
+		return;
+
+	if (smp_processor_id() != 0) {
+		pr_emerg("Error TXT SEXIT must be called on CPU 0\n");
+		return;
+	}
+
+	/* Disable SMX mode */
+	cr4_set_bits(X86_CR4_SMXE);
+
+	/* Do the SEXIT SMX operation */
+	smx_getsec_sexit();
+
+	pr_emerg("TXT SEXIT complete.");
+}
diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
index 4b34a9a..fdf0a27 100644
--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -39,6 +39,7 @@
 #include <linux/hugetlb.h>
 #include <linux/objtool.h>
 #include <linux/kmsg_dump.h>
+#include <linux/slaunch.h>
 
 #include <asm/page.h>
 #include <asm/sections.h>
@@ -1179,6 +1180,9 @@ int kernel_kexec(void)
 		cpu_hotplug_enable();
 		pr_notice("Starting new kernel\n");
 		machine_shutdown();
+
+		/* Finalize TXT registers and do SEXIT */
+		slaunch_finalize(1);
 	}
 
 	kmsg_dump(KMSG_DUMP_SHUTDOWN);
-- 
1.8.3.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ