| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210827033105.26595-1-chunfeng.yun@mediatek.com>
Date: Fri, 27 Aug 2021 11:31:05 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: Mathias Nyman <mathias.nyman@...el.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
<linux-usb@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, "Ikjoon Jang" <ikjn@...omium.org>,
Eddie Hung <eddie.hung@...iatek.com>
Subject: [PATCH next v3] usb: xhci-mtk: allow bandwidth table rollover
xhci-mtk has 64 slots for periodic bandwidth calculations and each
slot represents byte budgets on a microframe. When an endpoint's
allocation sits on the boundary of the table, byte budgets' slot
can be rolled over but the current implementation doesn't.
This patch allows the microframe index rollover and prevent
out-of-bounds array access.
Signed-off-by: Ikjoon Jang <ikjn@...omium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v3: fix conficts with usb-testing branch
v2: new patch
---
drivers/usb/host/xhci-mtk-sch.c | 54 ++++++++++-----------------------
drivers/usb/host/xhci-mtk.h | 3 +-
2 files changed, 18 insertions(+), 39 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index f0ceede85ea5..134f4789bd89 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -416,15 +416,14 @@ static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw,
{
u32 max_bw = 0;
u32 bw;
- int i;
- int j;
+ int i, j, k;
for (i = 0; i < sch_ep->num_esit; i++) {
u32 base = offset + i * sch_ep->esit;
for (j = 0; j < sch_ep->num_budget_microframes; j++) {
- bw = sch_bw->bus_bw[base + j] +
- sch_ep->bw_budget_table[j];
+ k = XHCI_MTK_BW_INDEX(base + j);
+ bw = sch_bw->bus_bw[k] + sch_ep->bw_budget_table[j];
if (bw > max_bw)
max_bw = bw;
}
@@ -436,18 +435,16 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
struct mu3h_sch_ep_info *sch_ep, bool used)
{
u32 base;
- int i;
- int j;
+ int i, j, k;
for (i = 0; i < sch_ep->num_esit; i++) {
base = sch_ep->offset + i * sch_ep->esit;
for (j = 0; j < sch_ep->num_budget_microframes; j++) {
+ k = XHCI_MTK_BW_INDEX(base + j);
if (used)
- sch_bw->bus_bw[base + j] +=
- sch_ep->bw_budget_table[j];
+ sch_bw->bus_bw[k] += sch_ep->bw_budget_table[j];
else
- sch_bw->bus_bw[base + j] -=
- sch_ep->bw_budget_table[j];
+ sch_bw->bus_bw[k] -= sch_ep->bw_budget_table[j];
}
}
}
@@ -457,7 +454,7 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
struct mu3h_sch_tt *tt = sch_ep->sch_tt;
u32 tmp;
int base;
- int i, j;
+ int i, j, k;
for (i = 0; i < sch_ep->num_esit; i++) {
base = offset + i * sch_ep->esit;
@@ -467,7 +464,8 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
* the hub will always delay one uframe to send data
*/
for (j = 0; j < sch_ep->num_budget_microframes; j++) {
- tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_budget_table[j];
+ k = XHCI_MTK_BW_INDEX(base + j);
+ tmp = tt->fs_bus_bw[k] + sch_ep->bw_budget_table[j];
if (tmp > FS_PAYLOAD_MAX)
return -ESCH_BW_OVERFLOW;
}
@@ -542,16 +540,18 @@ static void update_sch_tt(struct mu3h_sch_ep_info *sch_ep, bool used)
{
struct mu3h_sch_tt *tt = sch_ep->sch_tt;
u32 base;
- int i, j;
+ int i, j, k;
for (i = 0; i < sch_ep->num_esit; i++) {
base = sch_ep->offset + i * sch_ep->esit;
- for (j = 0; j < sch_ep->num_budget_microframes; j++)
+ for (j = 0; j < sch_ep->num_budget_microframes; j++) {
+ k = XHCI_MTK_BW_INDEX(base + j);
if (used)
- tt->fs_bus_bw[base + j] += sch_ep->bw_budget_table[j];
+ tt->fs_bus_bw[k] += sch_ep->bw_budget_table[j];
else
- tt->fs_bus_bw[base + j] -= sch_ep->bw_budget_table[j];
+ tt->fs_bus_bw[k] -= sch_ep->bw_budget_table[j];
+ }
}
if (used)
@@ -573,27 +573,9 @@ static int load_ep_bw(struct mu3h_sch_bw_info *sch_bw,
return 0;
}
-static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep)
-{
- u32 boundary = sch_ep->esit;
-
- if (sch_ep->sch_tt) { /* LS/FS with TT */
- /*
- * tune for CS, normally esit >= 8 for FS/LS,
- * not add one for other types to avoid access array
- * out of boundary
- */
- if (sch_ep->ep_type == ISOC_OUT_EP && boundary > 1)
- boundary--;
- }
-
- return boundary;
-}
-
static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep)
{
struct mu3h_sch_bw_info *sch_bw = sch_ep->bw_info;
- const u32 esit_boundary = get_esit_boundary(sch_ep);
const u32 bw_boundary = get_bw_boundary(sch_ep->speed);
u32 offset;
u32 worst_bw;
@@ -606,10 +588,6 @@ static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep)
* and find a microframe where its worst bandwidth is minimum.
*/
for (offset = 0; offset < sch_ep->esit; offset++) {
-
- if ((offset + sch_ep->num_budget_microframes) > esit_boundary)
- break;
-
ret = check_sch_tt(sch_ep, offset);
if (ret)
continue;
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 9c54a597e66b..4b1ea89f959a 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -25,7 +25,8 @@
* round down to the limit value, that means allocating more
* bandwidth to it.
*/
-#define XHCI_MTK_MAX_ESIT 64
+#define XHCI_MTK_MAX_ESIT (1 << 6)
+#define XHCI_MTK_BW_INDEX(x) ((x) & (XHCI_MTK_MAX_ESIT - 1))
/**
* @fs_bus_bw: array to keep track of bandwidth already used for FS
--
2.18.0
Powered by blists - more mailing lists