[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210828131814.29589-9-konrad.dybcio@somainline.org>
Date: Sat, 28 Aug 2021 15:18:04 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: ~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Brown <broonie@...nel.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Viresh Kumar <viresh.kumar@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Sudeep Holla <sudeep.holla@....com>,
Hector Martin <marcan@...can.st>,
Vinod Koul <vkoul@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-arm-msm@...r.kernel.org
Subject: [PATCH v2 09/18] arm64: dts: qcom: sm6350: Add TSENS nodes
Add nodes required for TSENS block using the common qcom,tsens-v2 binding.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d945a44e63df..986d7fb01cbb 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -515,6 +515,28 @@ pdc: interrupt-controller@...0000 {
interrupt-controller;
};
+ tsens0: thermal-sensor@...3000 {
+ compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...5000 {
+ compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
tlmm: pinctrl@...0000 {
compatible = "qcom,sm6350-tlmm";
reg = <0 0x0f100000 0 0x300000>;
--
2.33.0
Powered by blists - more mailing lists