[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <39680f6f-56ff-7f87-0d8a-9bd31dc5ffce@somainline.org>
Date: Sat, 28 Aug 2021 17:49:24 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: Maulik Shah <mkshah@...eaurora.org>,
~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Rob Herring <robh@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Brown <broonie@...nel.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Viresh Kumar <viresh.kumar@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Sudeep Holla <sudeep.holla@....com>,
Hector Martin <marcan@...can.st>,
Vinod Koul <vkoul@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v2 06/18] arm64: dts: qcom: sm6350: Add TLMM block node
On 28.08.2021 17:47, Maulik Shah wrote:
> Hi,
>
> On 8/28/2021 6:48 PM, Konrad Dybcio wrote:
>> Add TLMM pinctrl node to enable referencing the SoC pins in other nodes.
>>
>> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
>> ---
>> Changes since v1:
>> - Fix the gpio ranges from 156 to 157
>>
>> arch/arm64/boot/dts/qcom/sm6350.dtsi | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> index d57c669ae0d6..03f7601457b4 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> @@ -406,6 +406,25 @@ pdc: interrupt-controller@...0000 {
>> interrupt-controller;
>> };
>> + tlmm: pinctrl@...0000 {
>> + compatible = "qcom,sm6350-tlmm";
>> + reg = <0 0x0f100000 0 0x300000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
> you will not require other interrupts (209 to 216) for dual edge to work since you have below set in pinctrl-sm6350.c
>
> .wakeirq_dual_edge_errata = true,
>
> Thanks,
> Maulik
Right, I updated the binding but not the dt... Thanks for spotting that.
Konrad
Powered by blists - more mailing lists