[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210828155441.GA820794@roeck-us.net>
Date: Sat, 28 Aug 2021 08:54:41 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Aleksa Savic <savicaleksa83@...il.com>
Cc: linux-hwmon@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] hwmon: add driver for Aquacomputer D5 Next
On Sat, Aug 28, 2021 at 07:26:28AM +0200, Aleksa Savic wrote:
> This driver exposes hardware sensors of the Aquacomputer D5 Next
> watercooling pump, which communicates through a proprietary USB HID
> protocol.
>
> Available sensors are pump and fan speed, power, voltage and current, as
> well as coolant temperature. Also available through debugfs are the serial
> number, firmware version and power-on count.
>
> Attaching a fan is optional and allows it to be controlled using
> temperature curves directly from the pump. If it's not connected,
> the fan-related sensors will report zeroes.
>
> The pump can be configured either through software or via its physical
> interface. Configuring the pump through this driver is not implemented,
> as it seems to require sending it a complete configuration. That
> includes addressable RGB LEDs, for which there is no standard sysfs
> interface. Thus, that task is better suited for userspace tools.
>
> This driver has been tested on x86_64, both in-kernel and as a module.
>
> Signed-off-by: Aleksa Savic <savicaleksa83@...il.com>
Applied.
Thanks,
Guenter
Powered by blists - more mailing lists