| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YSp7az2iBlPnGgxQ@yoga>
Date: Sat, 28 Aug 2021 13:07:39 -0500
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Konrad Dybcio <konrad.dybcio@...ainline.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Andy Gross <agross@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: pinctrl: qcom: Add SM6350 pinctrl
bindings
On Sat 28 Aug 12:23 CDT 2021, Konrad Dybcio wrote:
> Add device tree binding Documentation details for Qualcomm SM6350
> pinctrl driver.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
> Changes since v2:
> - Tweak the regex to match gpio0-gpio157
>
> .../bindings/pinctrl/qcom,sm6350-pinctrl.yaml | 148 ++++++++++++++++++
> 1 file changed, 148 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> new file mode 100644
> index 000000000000..554992a681f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
> @@ -0,0 +1,148 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM6350 TLMM block
> +
> +maintainers:
> + - Konrad Dybcio <konrad.dybcio@...ainline.org>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer (TLMM) block found
> + in the SM6350 platform.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,sm6350-tlmm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts: true
> + interrupt-controller: true
> + '#interrupt-cells': true
> + gpio-controller: true
> + gpio-reserved-ranges: true
> + '#gpio-cells': true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> + '-state$':
> + oneOf:
> + - $ref: "#/$defs/qcom-sm6350-tlmm-state"
> + - patternProperties:
> + ".*":
> + $ref: "#/$defs/qcom-sm6350-tlmm-state"
> +
> +$defs:
> + qcom-sm6350-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
> + atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
> + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
> + atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
> + cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
> + cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
> + dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
> + gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
> + mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
> + mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
> + phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
> + phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
> + phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
> + phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
> + phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
> + pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
> + qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
> + qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
> + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
> + qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
> + qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
> + rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
> + sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
> + tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
> + uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
> + wlan2_adc0, wlan2_adc1, ]
> +
> +
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + pinctrl@...0000 {
> + compatible = "qcom,sm6350-tlmm";
> + reg = <0x0f100000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 157>;
> +
> + gpio-wo-subnode-state {
> + pins = "gpio1";
> + function = "gpio";
> + };
> +
> + uart-w-subnodes-state {
> + rx {
> + pins = "gpio25";
> + function = "qup13_f2";
> + bias-disable;
> + };
> +
> + tx {
> + pins = "gpio26";
> + function = "qup13_f2";
> + bias-disable;
> + };
> + };
> + };
> +...
> --
> 2.33.0
>
Powered by blists - more mailing lists