linux-kernel - Re: [PATCH net-next v6] ipv6: add IFLA_INET6_RA

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20210827210629.6858ceb9@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
Date:   Fri, 27 Aug 2021 21:06:29 -0700
From:   Jakub Kicinski <kuba@...nel.org>
To:     David Ahern <dsahern@...il.com>, Rocco Yue <rocco.yue@...iatek.com>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        David Ahern <dsahern@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, rocco.yue@...il.com,
        chao.song@...iatek.com, zhuoliang.zhang@...iatek.com
Subject: Re: [PATCH net-next v6] ipv6: add IFLA_INET6_RA_MTU to expose mtu
 value

On Fri, 27 Aug 2021 09:41:53 -0700 David Ahern wrote:
> On 8/27/21 8:04 AM, Rocco Yue wrote:
> > The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
> > file, which can temporarily record the mtu value of the last
> > received RA message when the RA mtu value is lower than the
> > interface mtu, but this proc has following limitations:
> > 
> > (1) when the interface mtu (/sys/class/net/<iface>/mtu) is
> > updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
> > be updated to the value of interface mtu;
> > (2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
> > ipv6 connection, and not affect ipv4.
> > 
> > Therefore, when the mtu option is carried in the RA message,
> > there will be a problem that the user sometimes cannot obtain
> > RA mtu value correctly by reading mtu6.
> > 
> > After this patch set, if a RA message carries the mtu option,
> > you can send a netlink msg which nlmsg_type is RTM_GETLINK,
> > and then by parsing the attribute of IFLA_INET6_RA_MTU to
> > get the mtu value carried in the RA message received on the
> > inet6 device. In addition, you can also get a link notification
> > when ra_mtu is updated so it doesn't have to poll.
> > 
> > In this way, if the MTU values that the device receives from
> > the network in the PCO IPv4 and the RA IPv6 procedures are
> > different, the user can obtain the correct ipv6 ra_mtu value
> > and compare the value of ra_mtu and ipv4 mtu, then the device
> > can use the lower MTU value for both IPv4 and IPv6.
> > 
> > Signed-off-by: Rocco Yue <rocco.yue@...iatek.com>
>
> Reviewed-by: David Ahern <dsahern@...nel.org>

Applied, thank you!