| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210829111330.22f6n3tvmm246jzg@pali>
Date: Sun, 29 Aug 2021 13:13:30 +0200
From: Pali Rohár <pali@...nel.org>
To: lorenzo.pieralisi@....com
Cc: Jeremy Linton <jeremy.linton@....com>, linux-pci@...r.kernel.org,
nsaenz@...nel.org, bhelgaas@...gle.com, rjw@...ysocki.net,
lenb@...nel.org, robh@...nel.org, kw@...ux.com,
f.fainelli@...il.com, sdonthineni@...dia.com,
stefan.wahren@...e.com, bcm-kernel-feedback-list@...adcom.com,
linux-acpi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] PCI: brcmstb: Add ACPI config space quirk
On Thursday 19 August 2021 16:56:53 Jeremy Linton wrote:
> The PFTF CM4 is an ACPI platform that isn't ECAM compliant. Its config
> space is in two parts. One part is for the root port registers and a
> second moveable window pointing at a device's 4K config space. Thus it
> doesn't have an MCFG, and any MCFG provided would be nonsense
> anyway. Instead, a Linux specific host bridge _DSD selects a custom
> ECAM ops and cfgres. The cfg op picks between those two regions while
> disallowing problematic accesses.
I'm not sure if Lorenzo would like this patch series...
In past there was a long discussion about ECAM compliance, MCFG quirks
and usage of ACPI (on other platform), see long thread:
https://lore.kernel.org/linux-pci/20200207183427.GA40158@google.com/
And I think it is not a good idea to extend MCFG quirks table as
according to discussion it was just temporary plaster and if platform is
not ACPI / ECAM compliant then it should use DT booting...
Lorenzo, could you put any comment on this?
> Signed-off-by: Jeremy Linton <jeremy.linton@....com>
> ---
> drivers/pci/controller/Makefile | 1 +
> drivers/pci/controller/pcie-brcmstb-acpi.c | 74 ++++++++++++++++++++++
> include/linux/pci-ecam.h | 1 +
> 3 files changed, 76 insertions(+)
> create mode 100644 drivers/pci/controller/pcie-brcmstb-acpi.c
>
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index aaf30b3dcc14..65aa6fd3ed89 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -57,5 +57,6 @@ ifdef CONFIG_PCI_QUIRKS
> obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
> obj-$(CONFIG_ARM64) += pci-thunder-pem.o
> obj-$(CONFIG_ARM64) += pci-xgene.o
> +obj-$(CONFIG_ARM64) += pcie-brcmstb-acpi.o
> endif
> endif
> diff --git a/drivers/pci/controller/pcie-brcmstb-acpi.c b/drivers/pci/controller/pcie-brcmstb-acpi.c
> new file mode 100644
> index 000000000000..71f6def3074c
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-brcmstb-acpi.c
> @@ -0,0 +1,74 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * ACPI quirks for Brcm2711 PCIe host controller
> + * As used on the Raspberry Pi Compute Module 4
> + *
> + * Copyright (C) 2021 Arm Ltd.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/pci.h>
> +#include <linux/pci-ecam.h>
> +#include "../pci.h"
> +#include "pcie-brcmstb.h"
> +
> +static int brcm_acpi_init(struct pci_config_window *cfg)
> +{
> + /*
> + * This platform doesn't technically have anything that could be called
> + * ECAM. Its config region has root port specific registers between
> + * standard PCIe defined config registers. Thus the region setup by the
> + * generic ECAM code needs to be adjusted. The HW can access bus 0-ff
> + * but the footprint isn't a nice power of 2 (40k). For purposes of
> + * mapping the config region we are just going to squash the standard
> + * and nonstandard registers together rather than mapping them separately.
> + */
> + iounmap(cfg->win);
> + cfg->win = pci_remap_cfgspace(cfg->res.start, resource_size(&cfg->res));
> + if (!cfg->win)
> + goto err_exit;
> +
> + /* MSI is nonstandard as well */
> + pci_no_msi();
> +
> + return 0;
> +err_exit:
> + dev_err(cfg->parent, "PCI: Failed to remap config\n");
> + return -ENOMEM;
> +}
> +
> +static void __iomem *brcm_pcie_map_conf2(struct pci_bus *bus,
> + unsigned int devfn, int where)
> +{
> + struct pci_config_window *cfg = bus->sysdata;
> + void __iomem *base = cfg->win;
> + int idx;
> + u32 up;
> +
> + /* Accesses to the RC go right to the RC registers if slot==0 */
> + if (pci_is_root_bus(bus))
> + return PCI_SLOT(devfn) ? NULL : base + where;
> +
> + /* Assure link up before sending request */
> + up = readl(base + PCIE_MISC_PCIE_STATUS);
> + if (!(up & PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK))
> + return NULL;
> +
> + if (!(up & PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK))
> + return NULL;
> +
> + /* For devices, write to the config space index register */
> + idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
> + writel(idx, base + PCIE_EXT_CFG_INDEX);
> + return base + PCIE_EXT_CFG_DATA + where;
> +}
> +
> +const struct pci_ecam_ops bcm2711_pcie_ops = {
> + .init = brcm_acpi_init,
> + .bus_shift = 1,
> + .pci_ops = {
> + .map_bus = brcm_pcie_map_conf2,
> + .read = pci_generic_config_read,
> + .write = pci_generic_config_write,
> + }
> +};
> diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
> index adea5a4771cf..a5de0285bb7f 100644
> --- a/include/linux/pci-ecam.h
> +++ b/include/linux/pci-ecam.h
> @@ -87,6 +87,7 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 *
> extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
> extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
> extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
> +extern const struct pci_ecam_ops bcm2711_pcie_ops; /* Bcm2711 PCIe */
> #endif
>
> #if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
> --
> 2.31.1
>
Powered by blists - more mailing lists