linux-kernel - [PATCH v7 4/8] clk: qcom: videocc-sm8250: use runtime PM for the clock controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210829154757.784699-5-dmitry.baryshkov@linaro.org>
Date:   Sun, 29 Aug 2021 18:47:53 +0300
From:   Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Taniya Das <tdas@...eaurora.org>,
        Jonathan Marek <jonathan@...ek.ca>,
        Michael Turquette <mturquette@...libre.com>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-clk@...r.kernel.org,
        Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
        Mark Brown <broonie@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v7 4/8] clk: qcom: videocc-sm8250: use runtime PM for the clock controller

On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Use runtime PM calls to make sure that required power domain is
powered on while we access clock controller's registers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
 drivers/clk/qcom/videocc-sm8250.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/videocc-sm8250.c b/drivers/clk/qcom/videocc-sm8250.c
index 7b435a1c2c4b..8617454e4a77 100644
--- a/drivers/clk/qcom/videocc-sm8250.c
+++ b/drivers/clk/qcom/videocc-sm8250.c
@@ -6,6 +6,7 @@
 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/qcom,videocc-sm8250.h>
@@ -364,13 +365,31 @@ static const struct of_device_id video_cc_sm8250_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, video_cc_sm8250_match_table);
 
+static void video_cc_sm8250_pm_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static int video_cc_sm8250_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_add_action_or_reset(&pdev->dev, video_cc_sm8250_pm_runtime_disable, &pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
 
 	regmap = qcom_cc_map(pdev, &video_cc_sm8250_desc);
-	if (IS_ERR(regmap))
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
 		return PTR_ERR(regmap);
+	}
 
 	clk_lucid_pll_configure(&video_pll0, regmap, &video_pll0_config);
 	clk_lucid_pll_configure(&video_pll1, regmap, &video_pll1_config);
@@ -379,7 +398,11 @@ static int video_cc_sm8250_probe(struct platform_device *pdev)
 	regmap_update_bits(regmap, 0xe58, BIT(0), BIT(0));
 	regmap_update_bits(regmap, 0xeec, BIT(0), BIT(0));
 
-	return qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+	ret = qcom_cc_really_probe(pdev, &video_cc_sm8250_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
 }
 
 static struct platform_driver video_cc_sm8250_driver = {
-- 
2.33.0