linux-kernel - [PATCH v6 0/1] asus-wmi: Add support for custom fan curves

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210829071402.576380-1-luke@ljones.dev>
Date:   Sun, 29 Aug 2021 19:14:01 +1200
From:   "Luke D. Jones" <luke@...nes.dev>
To:     linux-kernel@...r.kernel.org
Cc:     hdegoede@...hat.com, pobrn@...tonmail.com, linux@...ck-us.net,
        platform-driver-x86@...r.kernel.org,
        "Luke D. Jones" <luke@...nes.dev>
Subject: [PATCH v6 0/1] asus-wmi: Add support for custom fan curves

Add support for custom fan curves found on some ASUS ROG laptops.

- V1
  + Initial patch work
- V2
  + Don't fail and remove wmi driver if error from
    asus_wmi_evaluate_method_buf() if error is -ENODEV
- V3
  + Store the "default" fan curves
  + Call throttle_thermal_policy_write() if a curve is erased to ensure
    that the factory default for a profile is applied again
- V4
  + Do not apply default curves by default. Testers have found that the
    default curves don't quite match actual no-curve behaviours
  + Add method to enable/disable curves for each profile
- V5
  + Remove an unrequired function left over from previous iterations
  + Ensure default curves are applied if user writes " " to a curve path
  + Rename "active_fan_curve_profiles" to "enabled_fan_curve_profiles" to
    better reflect the behavious of this setting
  + Move throttle_thermal_policy_write_*pu_curves() and rename to
    fan_curve_*pu_write()
  + Merge fan_curve_check_valid() and fan_curve_write()
  + Remove some leftover debug statements
- V6
  + Refactor data structs to store  array or u8 instead of strings.
    This affects the entire patch except the enabled_fan_curves block
  + Use sysfs_match_string in enabled_fan_curve block
  + Add some extra comments to describe things
  + Allow some variation in how fan curve input can be formatted
  + Use SENSOR_DEVICE_ATTR_2_RW() to reduce the amount of lines per
    fan+profile combo drastically

Luke D. Jones (1):
  asus-wmi: Add support for custom fan curves

 drivers/platform/x86/asus-wmi.c            | 617 ++++++++++++++++++++-
 include/linux/platform_data/x86/asus-wmi.h |   2 +
 2 files changed, 617 insertions(+), 2 deletions(-)

--
2.31.1