linux-kernel - [PATCH v10 00/12] Add Wacom I2C support to rM2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210829091925.190-1-alistair@alistair23.me>
Date:   Sun, 29 Aug 2021 19:19:12 +1000
From:   Alistair Francis <alistair@...stair23.me>
To:     dmitry.torokhov@...il.com, linux-input@...r.kernel.org,
        linux-imx@....com, kernel@...gutronix.de, pinglinux@...il.com,
        tatsunosuke.tobita@...om.com, junkpainting@...il.com,
        ping.cheng@...om.com
Cc:     linux-kernel@...r.kernel.org, alistair23@...il.com,
        robh+dt@...nel.org, devicetree@...r.kernel.org,
        Alistair Francis <alistair@...stair23.me>
Subject: [PATCH v10 00/12] Add Wacom I2C support to rM2

Add support to the reMarkable2 (rM2) for the Wacom I2C device.

This is based on the reMarkable Linux fork and with this series I am
able to use the Wacom digitiser on the rM2.

v10:
 - Add a new patch to determine the generation
 - Use generation to determine if tilt is supported
 - Address comments from v9
 - Remove flip-pressure
v9:
 - Add two new patches
 - Fixup the device tree interrupt line
v7:
 - Fx the compatible name and documentation

Alistair Francis (12):
  dt-bindings: Add Wacom to vendor bindings
  dt-bindings: touchscreen: Initial commit of wacom,i2c
  Input: wacom_i2c - Add device tree support to wacom_i2c
  Input: wacom_i2c - Add touchscren properties
  Input: wacom_i2c - Read the descriptor values
  Input: wacom_i2c - Add support for distance and tilt x/y
  Input: wacom_i2c - Clean up the query device fields
  Input: wacom_i2c - Add support for vdd regulator
  Input: wacom_i2c - Use macros for the bit masks
  Input: wacom_i2c - Allow flipping the values from the DT
  ARM: imx_v6_v7_defconfig: Enable Wacom I2C
  ARM: dts: imx7d: remarkable2: add wacom digitizer device

 .../input/touchscreen/wacom,generic.yaml      |  68 +++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/imx7d-remarkable2.dts       |  61 ++++
 arch/arm/configs/imx_v6_v7_defconfig          |   1 +
 drivers/input/touchscreen/wacom_i2c.c         | 262 +++++++++++++++---
 5 files changed, 358 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,generic.yaml

-- 
2.31.1