linux-kernel - [net-next PATCH] octeontx2-af: Use NDC TX for transmit packet data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210830125518.20419-1-gakula@marvell.com>
Date:   Mon, 30 Aug 2021 18:25:18 +0530
From:   Geetha sowjanya <gakula@...vell.com>
To:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC:     <kuba@...nel.org>, <davem@...emloft.net>, <sgoutham@...vell.com>,
        <lcherian@...vell.com>, <gakula@...vell.com>, <jerinj@...vell.com>,
        <sbhatta@...vell.com>, <hkelam@...vell.com>
Subject: [net-next PATCH] octeontx2-af: Use NDC TX for transmit packet data

For better performance set hardware to use NDC TX for reading packet
data specified NIX_SEND_SG_S.

Signed-off-by: Geetha sowjanya <gakula@...vell.com>
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 3 +++
 drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8f37477e0cb5..9ef4e942e31e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4200,6 +4200,9 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 	/* Restore CINT timer delay to HW reset values */
 	rvu_write64(rvu, blkaddr, NIX_AF_CINT_DELAY, 0x0ULL);
 
+	/* For better performance use NDC TX instead of NDC RX for SQ's SQEs" */
+	rvu_write64(rvu, blkaddr, NIX_AF_SEB_CFG, 0x1ULL);
+
 	if (is_block_implemented(hw, blkaddr)) {
 		err = nix_setup_txschq(rvu, nix_hw, blkaddr);
 		if (err)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 576b037a00f0..21f1ed4e222f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -263,6 +263,7 @@
 #define NIX_AF_SDP_TX_FIFO_STATUS	(0x0640)
 #define NIX_AF_TX_NPC_CAPTURE_CONFIG	(0x0660)
 #define NIX_AF_TX_NPC_CAPTURE_INFO	(0x0670)
+#define NIX_AF_SEB_CFG			(0x05F0)
 
 #define NIX_AF_DEBUG_NPC_RESP_DATAX(a)          (0x680 | (a) << 3)
 #define NIX_AF_SMQX_CFG(a)                      (0x700 | (a) << 16)
-- 
2.17.1