| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <MW4PR03MB6363BC976F039550906B6ED399CB9@MW4PR03MB6363.namprd03.prod.outlook.com>
Date: Mon, 30 Aug 2021 15:02:26 +0000
From: "Sa, Nuno" <Nuno.Sa@...log.com>
To: Jonathan Cameron <jic23@...nel.org>
CC: Miquel Raynal <miquel.raynal@...tlin.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 03/16] iio: adc: max1027: Push only the requested samples
> -----Original Message-----
> From: Jonathan Cameron <jic23@...nel.org>
> Sent: Monday, August 30, 2021 4:30 PM
> To: Sa, Nuno <Nuno.Sa@...log.com>
> Cc: Miquel Raynal <miquel.raynal@...tlin.com>; Lars-Peter Clausen
> <lars@...afoo.de>; Thomas Petazzoni
> <thomas.petazzoni@...tlin.com>; linux-iio@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Subject: Re: [PATCH 03/16] iio: adc: max1027: Push only the requested
> samples
>
> [External]
>
> On Mon, 30 Aug 2021 10:49:50 +0000
> "Sa, Nuno" <Nuno.Sa@...log.com> wrote:
>
> > > -----Original Message-----
> > > From: Jonathan Cameron <jic23@...nel.org>
> > > Sent: Monday, August 30, 2021 12:08 PM
> > > To: Sa, Nuno <Nuno.Sa@...log.com>
> > > Cc: Miquel Raynal <miquel.raynal@...tlin.com>; Lars-Peter
> Clausen
> > > <lars@...afoo.de>; Thomas Petazzoni
> > > <thomas.petazzoni@...tlin.com>; linux-iio@...r.kernel.org;
> linux-
> > > kernel@...r.kernel.org
> > > Subject: Re: [PATCH 03/16] iio: adc: max1027: Push only the
> requested
> > > samples
> > >
> > > [External]
> > >
> > > On Fri, 20 Aug 2021 07:10:48 +0000
> > > "Sa, Nuno" <Nuno.Sa@...log.com> wrote:
> > >
> > > > > -----Original Message-----
> > > > > From: Miquel Raynal <miquel.raynal@...tlin.com>
> > > > > Sent: Wednesday, August 18, 2021 1:11 PM
> > > > > To: Jonathan Cameron <jic23@...nel.org>; Lars-Peter Clausen
> > > > > <lars@...afoo.de>
> > > > > Cc: Thomas Petazzoni <thomas.petazzoni@...tlin.com>; linux-
> > > > > iio@...r.kernel.org; linux-kernel@...r.kernel.org; Miquel
> Raynal
> > > > > <miquel.raynal@...tlin.com>
> > > > > Subject: [PATCH 03/16] iio: adc: max1027: Push only the
> requested
> > > > > samples
> > > > >
> > > > > [External]
> > > > >
> > > > > When a triggered scan occurs, the identity of the desired
> channels
> > > is
> > > > > known in indio_dev->active_scan_mask. Instead of reading and
> > > > > pushing to
> > > > > the IIO buffers all channels each time, scan the minimum
> amount
> > > of
> > > > > channels (0 to maximum requested chan, to be exact) and only
> > > > > provide the
> > > > > samples requested by the user.
> > > > >
> > > > > For example, if the user wants channels 1, 4 and 5, all channels
> > > from
> > > > > 0 to 5 will be scanned but only the desired channels will be
> pushed
> > > to
> > > > > the IIO buffers.
> > > > >
> > > > > Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
> > > > > ---
> > > > > drivers/iio/adc/max1027.c | 25 +++++++++++++++++++++----
> > > > > 1 file changed, 21 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/drivers/iio/adc/max1027.c
> b/drivers/iio/adc/max1027.c
> > > > > index b753658bb41e..8ab660f596b5 100644
> > > > > --- a/drivers/iio/adc/max1027.c
> > > > > +++ b/drivers/iio/adc/max1027.c
> > > > > @@ -360,6 +360,9 @@ static int
> max1027_set_trigger_state(struct
> > > > > iio_trigger *trig, bool state)
> > > > > struct max1027_state *st = iio_priv(indio_dev);
> > > > > int ret;
> > > > >
> > > > > + if (bitmap_empty(indio_dev->active_scan_mask,
> indio_dev-
> > > > > >masklength))
> > > > > + return -EINVAL;
> > > > > +
> > > >
> > > > I'm not sure this can actually happen. If you try to enable the
> buffer
> > > > with no scan element, it should give you an error before you
> reach
> > > > this point...
> > > >
> > > > > if (state) {
> > > > > /* Start acquisition on cnvst */
> > > > > st->reg = MAX1027_SETUP_REG |
> > > > > MAX1027_CKS_MODE0 |
> > > > > @@ -368,9 +371,12 @@ static int
> max1027_set_trigger_state(struct
> > > > > iio_trigger *trig, bool state)
> > > > > if (ret < 0)
> > > > > return ret;
> > > > >
> > > > > - /* Scan from 0 to max */
> > > > > - st->reg = MAX1027_CONV_REG |
> MAX1027_CHAN(0) |
> > > > > - MAX1027_SCAN_N_M |
> MAX1027_TEMP;
> > > > > + /*
> > > > > + * Scan from 0 to the highest requested
> channel. The
> > > > > temperature
> > > > > + * could be avoided but it simplifies a bit the
> logic.
> > > > > + */
> > > > > + st->reg = MAX1027_CONV_REG |
> > > > > MAX1027_SCAN_0_N | MAX1027_TEMP;
> > > > > + st->reg |= MAX1027_CHAN(fls(*indio_dev-
> > > > > >active_scan_mask) - 2);
> > > > > ret = spi_write(st->spi, &st->reg, 1);
> > > > > if (ret < 0)
> > > > > return ret;
> > > > > @@ -391,11 +397,22 @@ static irqreturn_t
> > > > > max1027_trigger_handler(int irq, void *private)
> > > > > struct iio_poll_func *pf = private;
> > > > > struct iio_dev *indio_dev = pf->indio_dev;
> > > > > struct max1027_state *st = iio_priv(indio_dev);
> > > > > + unsigned int scanned_chans = fls(*indio_dev-
> > > > > >active_scan_mask);
> > > > > + u16 *buf = st->buffer;
> > > >
> > > > I think sparse will complain here. buffer is a __be16 restricted
> > > > type so you should not mix those...
> > > > > + unsigned int bit;
> > > > >
> > > > > pr_debug("%s(irq=%d, private=0x%p)\n", __func__,
> irq,
> > > > >
> > >
> private);in/20210818_miquel_raynal_bring_software_triggers_support
> > > _to_max1027_like_adcs.mbx
> > > > >
> > > > > /* fill buffer with all channel */
> > > > > - spi_read(st->spi, st->buffer, indio_dev->masklength *
> 2);
> > > > > + spi_read(st->spi, st->buffer, scanned_chans * 2);
> > > > > +
> > > > > + /* Only keep the channels selected by the user */
> > > > > + for_each_set_bit(bit, indio_dev->active_scan_mask,
> > > > > + indio_dev->masklength) {
> > > > > + if (buf[0] != st->buffer[bit])
> > > > > + buf[0] = st->buffer[bit];
> > > >
> > > > Since we are here, when looking into the driver, I realized
> > > > that st->buffer is not DMA safe. In IIO, we kind of want to
> enforce
> > > > that all buffers that are passed to spi/i2c buses are safe... Maybe
> > > > this is something you can include in your series.
> > >
> > > Why is it not? st->buffer is result of a devm_kmalloc_array() call
> and
> > > that should provide a DMA safe buffer as I understand it.
> > >
> >
> > That's a good question. I'm not sure how I came to that conclusion
> which
> > is clearly wrong. Though I think the buffer might share the line with
> the
> > mutex...
> Pointer shares a line. The buffer it points to doesn't as allocated
> by separate heap allocation.
>
Ups, sure :facepalm:
- Nuno Sá
Powered by blists - more mailing lists