linux-kernel - Re: [PATCH V2] mtd: rawnand: qcom: Update code word value for raw read

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210831134231.14413a4f@xps13>
Date:   Tue, 31 Aug 2021 13:42:31 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Md Sadre Alam <mdalam@...eaurora.org>
Cc:     mani@...nel.org, boris.brezillon@...labora.com,
        linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
        sricharan@...eaurora.org, stable@...nel.org
Subject: Re: [PATCH V2] mtd: rawnand: qcom: Update code word value for raw
 read

Hi Md,

Md Sadre Alam <mdalam@...eaurora.org> wrote on Tue, 31 Aug 2021
14:26:40 +0530:

> From QPIC V2 onwards there is a separate register to read
> last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
> 
> qcom_nandc_read_cw_raw() is used to read only one code word
> at a time. If we will configure number of code words to 1 in
> in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks
> its reading the last code word, since from QPIC V2 onwards
> we are having separate register to read the last code word,
> we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n"
> register to fetch data from controller buffer to system
> memory.
> 
> Cc: stable@...nel.org

You miss the Fixes tag which is certainly the most important.

> Signed-off-by: Md Sadre Alam <mdalam@...eaurora.org>
> 
> [V2]
>  * Added stable tags

The changelog should not be part of the commit message.
You should put it...

> ---

...here.

>  drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index ef0bade..04e6f7b 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	struct nand_ecc_ctrl *ecc = &chip->ecc;
>  	int data_size1, data_size2, oob_size1, oob_size2;
>  	int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
> +	int raw_cw = cw;
>  
>  	nand_read_page_op(chip, page, 0, NULL, 0);
>  	host->use_ecc = false;
>  
> +	if (nandc->props->qpic_v2)
> +		raw_cw = ecc->steps - 1;
> +
>  	clear_bam_transaction(nandc);
>  	set_address(host, host->cw_size * cw, page);
> -	update_rw_regs(host, 1, true, cw);
> +	update_rw_regs(host, 1, true, raw_cw);
>  	config_nand_page_read(chip);
>  
>  	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
> @@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
>  	}
>  
> -	config_nand_cw_read(chip, false, cw);
> +	config_nand_cw_read(chip, false, raw_cw);
>  
>  	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
>  	reg_off += data_size1;

Thanks,
Miquèl