| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHKDPP_n4RZhAqaUcGZc0Z7C+fc6jh72GSzbxQHoy47-msJqGw@mail.gmail.com>
Date: Tue, 31 Aug 2021 21:06:56 -0300
From: Pedro Terra Delboni <pedro@...raco.de>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Hans Verkuil <hverkuil-cisco@...all.nl>,
Dafna Hirschfeld <dafna.hirschfeld@...labora.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Shuah Khan <skhan@...uxfoundation.org>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Gabriela Bittencourt <gabrielabittencourt00@...il.com>,
Gabriel Francisco Mandaji <gfmandaji@...il.com>
Subject: Re: [PATCH v7] media: vimc: Enable set resolution at the scaler src pad
Hi Laurent,
Thank you for all the help =)
On Tue, Aug 31, 2021 at 6:52 PM Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
>
> Hi Pedro,
>
> Thank you for the patch.
>
> On Tue, Aug 31, 2021 at 02:48:22PM -0300, Pedro Terra wrote:
> > Modify the scaler subdevice to accept setting the resolution of the source
> > pad (previously the source resolution would always be 3 times the sink for
> > both dimensions). Now any resolution can be set at src (even smaller ones)
> > and the sink video will be scaled to match it.
> >
> > Test example: With the vimc module up (using the default vimc topology)
> > media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
> > media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
> > media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
> > media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
> > media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
> > v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
> > v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
> > v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
> > -stream-to=test.raw
>
> That should be --stream-to, not -stream-to.
>
> >
> > The result will be a cropped stream that can be checked with the command
> > ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
> > -video_size "300x700" test.raw
> >
> > Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@...il.com>
> > Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@...il.com>
> > Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@...il.com>
> > Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@...il.com>
> > Signed-off-by: Pedro "pirate" Terra <pirate@...raco.de>
> >
> > ---
> >
> > Changes in V7:
> > * Corrections proposed by Laurent:
> > - Fix commit message
> > - Fix .rst identation
> > - Properly initialize both pads in a loop
> > - Placed vimc_sca_get_fmt() before set_fmt to keep
> > the order they're set in v4l2_subdev_pad_ops structure.
> > - Renamed variables to avoid ambiguity.
> >
> > Changes in V6:
> > * Corrections proposed by Laurent:
> > - Corrected commit example to become file independent.
> > - Cleaned unnecessary code inserted at vimc_sca_init_cfg
> > - s/__u32/u32/
> > - Refactored vimc_sca_(set/get)_fmt and vimc_sca_(get/set)_selection
> > as suggested to make it more readable.
> > - Corrected code alignment.
> > - Cleaned and optimized vimc_sca_fill_src_frame
> >
> > Changes in V5:
> > * Fixed code aliment mistake
> > * Renamed some variables to make the code more readable
> > * Propagate sink pad formatting to src resetting the 1:1 scaling ratio.
> > (the crop is also reset when this is done).
> >
> > Changes in V4:
> > * Rebased with media/master
> > * Scaling is now compatible with crop
> > * Updated test example at the commit message
> > * Add vimc prefix to the pad enumeration
> >
> > Changes in V3:
> > * Corrections suggested by Hans:
> > - Default scaling factor is now 1 (we removed the define and
> > set the source format equals the sink).
> > - Removed SCA_COUNT (enum that represents the number of pads)
> > as there always 2
> > - Swapped the per byte pixel copy to memcpy.
> > * Corrections suggested by Dafna:
> > - Removed from the documentation the old scaler parameter which
> > isn't necessary anymore.
> > * Added a thank you note at the end of the email
> >
> > Changes in V2:
> > * Patch was not sent to media list mail for some reason (even though it
> > was on the Cc list), trying again.
> > * Updating documentation.
> >
> > Running
> > /usr/local/bin/v4l2-compliance -m /dev/media0
> > Gave the following result:
> > v4l2-compliance SHA: c86aab9cc7f1 2021-07-28 11:52:45
> > Grand Total for vimc device /dev/media0: 473, Succeeded: 473, Failed: 0, Warnings: 0
> > ---
> > Documentation/admin-guide/media/vimc.rst | 20 +-
> > drivers/media/test-drivers/vimc/vimc-scaler.c | 366 +++++++-----------
> > 2 files changed, 148 insertions(+), 238 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/media/vimc.rst b/Documentation/admin-guide/media/vimc.rst
> > index 211cc8972410..4e5793db6651 100644
> > --- a/Documentation/admin-guide/media/vimc.rst
> > +++ b/Documentation/admin-guide/media/vimc.rst
> > @@ -61,9 +61,10 @@ vimc-debayer:
> > * 1 Pad source
> >
> > vimc-scaler:
> > - Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
> > - 1920x1440 image. (this value can be configured, see at
> > - `Module options`_).
> > + Re-size the image to meet the source pad resolution. E.g.: if the sync pad
> > + is configured to 360x480 and the source to 1280x720, the image will be stretched
> > + to fit the source resolution. Works for any resolution within the vimc
> > + limitations (even shrinking the image if necessary).
>
> Lines should be wrapped at 80 columns in the documentation.
>
> Apart from that, it all looks good.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>
> If you're fine with it, I can fix the two issues above when applying the
> patch to my tree, and I'll then send a pull request.
I'm fine with it, but in any case I sent you a "v8" with the proposed
changes, in case it makes things easier.
>
> Would anyone else like to review this patch ?
>
> > Exposes:
> >
> > * 1 Pad sink
> > @@ -75,16 +76,3 @@ vimc-capture:
> >
> > * 1 Pad sink
> > * 1 Pad source
> > -
> > -
> > -Module options
> > ---------------
> > -
> > -Vimc has a module parameter to configure the driver.
> > -
> > -* ``sca_mult=<unsigned int>``
> > -
> > - Image size multiplier factor to be used to multiply both width and
> > - height, so the image size will be ``sca_mult^2`` bigger than the
> > - original one. Currently, only supports scaling up (the default value
> > - is 3).
> > diff --git a/drivers/media/test-drivers/vimc/vimc-scaler.c b/drivers/media/test-drivers/vimc/vimc-scaler.c
> > index 06880dd0b6ac..820b8f5b502f 100644
> > --- a/drivers/media/test-drivers/vimc/vimc-scaler.c
> > +++ b/drivers/media/test-drivers/vimc/vimc-scaler.c
> > @@ -6,6 +6,7 @@
> > */
> >
> > #include <linux/moduleparam.h>
> > +#include <linux/string.h>
> > #include <linux/vmalloc.h>
> > #include <linux/v4l2-mediabus.h>
> > #include <media/v4l2-rect.h>
> > @@ -13,11 +14,11 @@
> >
> > #include "vimc-common.h"
> >
> > -static unsigned int sca_mult = 3;
> > -module_param(sca_mult, uint, 0000);
> > -MODULE_PARM_DESC(sca_mult, " the image size multiplier");
> > -
> > -#define MAX_ZOOM 8
> > +/* Pad identifier */
> > +enum vic_sca_pad {
> > + VIMC_SCA_SINK = 0,
> > + VIMC_SCA_SRC = 1,
> > +};
> >
> > #define VIMC_SCA_FMT_WIDTH_DEFAULT 640
> > #define VIMC_SCA_FMT_HEIGHT_DEFAULT 480
> > @@ -25,19 +26,16 @@ MODULE_PARM_DESC(sca_mult, " the image size multiplier");
> > struct vimc_sca_device {
> > struct vimc_ent_device ved;
> > struct v4l2_subdev sd;
> > - /* NOTE: the source fmt is the same as the sink
> > - * with the width and hight multiplied by mult
> > - */
> > - struct v4l2_mbus_framefmt sink_fmt;
> > struct v4l2_rect crop_rect;
> > + /* Frame format for both sink and src pad */
> > + struct v4l2_mbus_framefmt fmt[2];
> > /* Values calculated when the stream starts */
> > u8 *src_frame;
> > - unsigned int src_line_size;
> > unsigned int bpp;
> > struct media_pad pads[2];
> > };
> >
> > -static const struct v4l2_mbus_framefmt sink_fmt_default = {
> > +static const struct v4l2_mbus_framefmt fmt_default = {
> > .width = VIMC_SCA_FMT_WIDTH_DEFAULT,
> > .height = VIMC_SCA_FMT_HEIGHT_DEFAULT,
> > .code = MEDIA_BUS_FMT_RGB888_1X24,
> > @@ -72,17 +70,6 @@ vimc_sca_get_crop_bound_sink(const struct v4l2_mbus_framefmt *sink_fmt)
> > return r;
> > }
> >
> > -static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
> > - const struct v4l2_mbus_framefmt *sink_fmt)
> > -{
> > - const struct v4l2_rect sink_rect =
> > - vimc_sca_get_crop_bound_sink(sink_fmt);
> > -
> > - /* Disallow rectangles smaller than the minimal one. */
> > - v4l2_rect_set_min_size(r, &crop_rect_min);
> > - v4l2_rect_map_inside(r, &sink_rect);
> > -}
> > -
> > static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state)
> > {
> > @@ -90,19 +77,14 @@ static int vimc_sca_init_cfg(struct v4l2_subdev *sd,
> > struct v4l2_rect *r;
> > unsigned int i;
> >
> > - mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - *mf = sink_fmt_default;
> > -
> > - r = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > - *r = crop_rect_default;
> > -
> > - for (i = 1; i < sd->entity.num_pads; i++) {
> > + for (i = 0; i < sd->entity.num_pads; i++) {
> > mf = v4l2_subdev_get_try_format(sd, sd_state, i);
> > - *mf = sink_fmt_default;
> > - mf->width = mf->width * sca_mult;
> > - mf->height = mf->height * sca_mult;
> > + *mf = fmt_default;
> > }
> >
> > + r = v4l2_subdev_get_try_crop(sd, sd_state, VIMC_SCA_SINK);
> > + *r = crop_rect_default;
> > +
> > return 0;
> > }
> >
> > @@ -144,112 +126,108 @@ static int vimc_sca_enum_frame_size(struct v4l2_subdev *sd,
> > fse->min_width = VIMC_FRAME_MIN_WIDTH;
> > fse->min_height = VIMC_FRAME_MIN_HEIGHT;
> >
> > - if (VIMC_IS_SINK(fse->pad)) {
> > - fse->max_width = VIMC_FRAME_MAX_WIDTH;
> > - fse->max_height = VIMC_FRAME_MAX_HEIGHT;
> > - } else {
> > - fse->max_width = VIMC_FRAME_MAX_WIDTH * MAX_ZOOM;
> > - fse->max_height = VIMC_FRAME_MAX_HEIGHT * MAX_ZOOM;
> > - }
> > + fse->max_width = VIMC_FRAME_MAX_WIDTH;
> > + fse->max_height = VIMC_FRAME_MAX_HEIGHT;
> >
> > return 0;
> > }
> >
> > +static struct v4l2_mbus_framefmt *
> > +vimc_sca_pad_format(struct vimc_sca_device *vsca,
> > + struct v4l2_subdev_state *sd_state, u32 pad,
> > + enum v4l2_subdev_format_whence which)
> > +{
> > + if (which == V4L2_SUBDEV_FORMAT_TRY)
> > + return v4l2_subdev_get_try_format(&vsca->sd, sd_state, pad);
> > + else
> > + return &vsca->fmt[pad];
> > +}
> > +
> > +static struct v4l2_rect *
> > +vimc_sca_pad_crop(struct vimc_sca_device *vsca,
> > + struct v4l2_subdev_state *sd_state,
> > + enum v4l2_subdev_format_whence which)
> > +{
> > + if (which == V4L2_SUBDEV_FORMAT_TRY)
> > + return v4l2_subdev_get_try_crop(&vsca->sd, sd_state,
> > + VIMC_SCA_SINK);
> > + else
> > + return &vsca->crop_rect;
> > +}
> > +
> > static int vimc_sca_get_fmt(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_format *format)
> > {
> > struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> > - struct v4l2_rect *crop_rect;
> > -
> > - /* Get the current sink format */
> > - if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> > - format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > - } else {
> > - format->format = vsca->sink_fmt;
> > - crop_rect = &vsca->crop_rect;
> > - }
> > -
> > - /* Scale the frame size for the source pad */
> > - if (VIMC_IS_SRC(format->pad)) {
> > - format->format.width = crop_rect->width * sca_mult;
> > - format->format.height = crop_rect->height * sca_mult;
> > - }
> >
> > + format->format = *vimc_sca_pad_format(vsca, sd_state, format->pad,
> > + format->which);
> > return 0;
> > }
> >
> > -static void vimc_sca_adjust_sink_fmt(struct v4l2_mbus_framefmt *fmt)
> > -{
> > - const struct vimc_pix_map *vpix;
> > -
> > - /* Only accept code in the pix map table in non bayer format */
> > - vpix = vimc_pix_map_by_code(fmt->code);
> > - if (!vpix || vpix->bayer)
> > - fmt->code = sink_fmt_default.code;
> > -
> > - fmt->width = clamp_t(u32, fmt->width, VIMC_FRAME_MIN_WIDTH,
> > - VIMC_FRAME_MAX_WIDTH) & ~1;
> > - fmt->height = clamp_t(u32, fmt->height, VIMC_FRAME_MIN_HEIGHT,
> > - VIMC_FRAME_MAX_HEIGHT) & ~1;
> > -
> > - if (fmt->field == V4L2_FIELD_ANY)
> > - fmt->field = sink_fmt_default.field;
> > -
> > - vimc_colorimetry_clamp(fmt);
> > -}
> > -
> > static int vimc_sca_set_fmt(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > - struct v4l2_subdev_format *fmt)
> > + struct v4l2_subdev_format *format)
> > {
> > struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> > - struct v4l2_mbus_framefmt *sink_fmt;
> > - struct v4l2_rect *crop_rect;
> > + struct v4l2_mbus_framefmt *fmt;
> >
> > - if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > - /* Do not change the format while stream is on */
> > - if (vsca->src_frame)
> > - return -EBUSY;
> > + /* Do not change the active format while stream is on */
> > + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && vsca->src_frame)
> > + return -EBUSY;
> >
> > - sink_fmt = &vsca->sink_fmt;
> > - crop_rect = &vsca->crop_rect;
> > - } else {
> > - sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > + fmt = vimc_sca_pad_format(vsca, sd_state, format->pad, format->which);
> > +
> > + /*
> > + * The media bus code and colorspace can only be changed on the sink
> > + * pad, the source pad only follows.
> > + */
> > + if (format->pad == VIMC_SCA_SINK) {
> > + const struct vimc_pix_map *vpix;
> > +
> > + /* Only accept code in the pix map table in non bayer format. */
> > + vpix = vimc_pix_map_by_code(format->format.code);
> > + if (vpix && !vpix->bayer)
> > + fmt->code = format->format.code;
> > + else
> > + fmt->code = fmt_default.code;
> > +
> > + /* Clamp the colorspace to valid values. */
> > + fmt->colorspace = format->format.colorspace;
> > + fmt->ycbcr_enc = format->format.ycbcr_enc;
> > + fmt->quantization = format->format.quantization;
> > + fmt->xfer_func = format->format.xfer_func;
> > + vimc_colorimetry_clamp(fmt);
> > }
> >
> > + /* Clamp and align the width and height */
> > + fmt->width = clamp_t(u32, format->format.width, VIMC_FRAME_MIN_WIDTH,
> > + VIMC_FRAME_MAX_WIDTH) & ~1;
> > + fmt->height = clamp_t(u32, format->format.height, VIMC_FRAME_MIN_HEIGHT,
> > + VIMC_FRAME_MAX_HEIGHT) & ~1;
> > +
> > /*
> > - * Do not change the format of the source pad,
> > - * it is propagated from the sink
> > + * Propagate the sink pad format to the crop rectangle and the source
> > + * pad.
> > */
> > - if (VIMC_IS_SRC(fmt->pad)) {
> > - fmt->format = *sink_fmt;
> > - fmt->format.width = crop_rect->width * sca_mult;
> > - fmt->format.height = crop_rect->height * sca_mult;
> > - } else {
> > - /* Set the new format in the sink pad */
> > - vimc_sca_adjust_sink_fmt(&fmt->format);
> > -
> > - dev_dbg(vsca->ved.dev, "%s: sink format update: "
> > - "old:%dx%d (0x%x, %d, %d, %d, %d) "
> > - "new:%dx%d (0x%x, %d, %d, %d, %d)\n", vsca->sd.name,
> > - /* old */
> > - sink_fmt->width, sink_fmt->height, sink_fmt->code,
> > - sink_fmt->colorspace, sink_fmt->quantization,
> > - sink_fmt->xfer_func, sink_fmt->ycbcr_enc,
> > - /* new */
> > - fmt->format.width, fmt->format.height, fmt->format.code,
> > - fmt->format.colorspace, fmt->format.quantization,
> > - fmt->format.xfer_func, fmt->format.ycbcr_enc);
> > -
> > - *sink_fmt = fmt->format;
> > -
> > - /* Do the crop, but respect the current bounds */
> > - vimc_sca_adjust_sink_crop(crop_rect, sink_fmt);
> > + if (format->pad == VIMC_SCA_SINK) {
> > + struct v4l2_mbus_framefmt *src_fmt;
> > + struct v4l2_rect *crop;
> > +
> > + crop = vimc_sca_pad_crop(vsca, sd_state, format->which);
> > + crop->width = fmt->width;
> > + crop->height = fmt->height;
> > + crop->top = 0;
> > + crop->left = 0;
> > +
> > + src_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SRC,
> > + format->which);
> > + *src_fmt = *fmt;
> > }
> >
> > + format->format = *fmt;
> > +
> > return 0;
> > }
> >
> > @@ -259,24 +237,17 @@ static int vimc_sca_get_selection(struct v4l2_subdev *sd,
> > {
> > struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd);
> > struct v4l2_mbus_framefmt *sink_fmt;
> > - struct v4l2_rect *crop_rect;
> >
> > if (VIMC_IS_SRC(sel->pad))
> > return -EINVAL;
> >
> > - if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > - sink_fmt = &vsca->sink_fmt;
> > - crop_rect = &vsca->crop_rect;
> > - } else {
> > - sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > - }
> > -
> > switch (sel->target) {
> > case V4L2_SEL_TGT_CROP:
> > - sel->r = *crop_rect;
> > + sel->r = *vimc_sca_pad_crop(vsca, sd_state, sel->which);
> > break;
> > case V4L2_SEL_TGT_CROP_BOUNDS:
> > + sink_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SINK,
> > + sel->which);
> > sel->r = vimc_sca_get_crop_bound_sink(sink_fmt);
> > break;
> > default:
> > @@ -286,6 +257,17 @@ static int vimc_sca_get_selection(struct v4l2_subdev *sd,
> > return 0;
> > }
> >
> > +static void vimc_sca_adjust_sink_crop(struct v4l2_rect *r,
> > + const struct v4l2_mbus_framefmt *sink_fmt)
> > +{
> > + const struct v4l2_rect sink_rect =
> > + vimc_sca_get_crop_bound_sink(sink_fmt);
> > +
> > + /* Disallow rectangles smaller than the minimal one. */
> > + v4l2_rect_set_min_size(r, &crop_rect_min);
> > + v4l2_rect_map_inside(r, &sink_rect);
> > +}
> > +
> > static int vimc_sca_set_selection(struct v4l2_subdev *sd,
> > struct v4l2_subdev_state *sd_state,
> > struct v4l2_subdev_selection *sel)
> > @@ -294,30 +276,18 @@ static int vimc_sca_set_selection(struct v4l2_subdev *sd,
> > struct v4l2_mbus_framefmt *sink_fmt;
> > struct v4l2_rect *crop_rect;
> >
> > - if (VIMC_IS_SRC(sel->pad))
> > + /* Only support setting the crop of the sink pad */
> > + if (VIMC_IS_SRC(sel->pad) || sel->target != V4L2_SEL_TGT_CROP)
> > return -EINVAL;
> >
> > - if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > - /* Do not change the format while stream is on */
> > - if (vsca->src_frame)
> > - return -EBUSY;
> > + if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE && vsca->src_frame)
> > + return -EBUSY;
> >
> > - crop_rect = &vsca->crop_rect;
> > - sink_fmt = &vsca->sink_fmt;
> > - } else {
> > - crop_rect = v4l2_subdev_get_try_crop(sd, sd_state, 0);
> > - sink_fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> > - }
> > -
> > - switch (sel->target) {
> > - case V4L2_SEL_TGT_CROP:
> > - /* Do the crop, but respect the current bounds */
> > - vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
> > - *crop_rect = sel->r;
> > - break;
> > - default:
> > - return -EINVAL;
> > - }
> > + crop_rect = vimc_sca_pad_crop(vsca, sd_state, sel->which);
> > + sink_fmt = vimc_sca_pad_format(vsca, sd_state, VIMC_SCA_SINK,
> > + sel->which);
> > + vimc_sca_adjust_sink_crop(&sel->r, sink_fmt);
> > + *crop_rect = sel->r;
> >
> > return 0;
> > }
> > @@ -344,16 +314,12 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
> > return 0;
> >
> > /* Save the bytes per pixel of the sink */
> > - vpix = vimc_pix_map_by_code(vsca->sink_fmt.code);
> > + vpix = vimc_pix_map_by_code(vsca->fmt[VIMC_SCA_SINK].code);
> > vsca->bpp = vpix->bpp;
> >
> > - /* Calculate the width in bytes of the src frame */
> > - vsca->src_line_size = vsca->crop_rect.width *
> > - sca_mult * vsca->bpp;
> > -
> > /* Calculate the frame size of the source pad */
> > - frame_size = vsca->src_line_size * vsca->crop_rect.height *
> > - sca_mult;
> > + frame_size = vsca->fmt[VIMC_SCA_SRC].width
> > + * vsca->fmt[VIMC_SCA_SRC].height * vsca->bpp;
> >
> > /* Allocate the frame buffer. Use vmalloc to be able to
> > * allocate a large amount of memory
> > @@ -382,77 +348,32 @@ static const struct v4l2_subdev_ops vimc_sca_ops = {
> > .video = &vimc_sca_video_ops,
> > };
> >
> > -static void vimc_sca_fill_pix(u8 *const ptr,
> > - const u8 *const pixel,
> > - const unsigned int bpp)
> > -{
> > - unsigned int i;
> > -
> > - /* copy the pixel to the pointer */
> > - for (i = 0; i < bpp; i++)
> > - ptr[i] = pixel[i];
> > -}
> > -
> > -static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca,
> > - unsigned int lin, unsigned int col,
> > - const u8 *const sink_frame)
> > -{
> > - const struct v4l2_rect crop_rect = vsca->crop_rect;
> > - unsigned int i, j, index;
> > - const u8 *pixel;
> > -
> > - /* Point to the pixel value in position (lin, col) in the sink frame */
> > - index = VIMC_FRAME_INDEX(lin, col,
> > - vsca->sink_fmt.width,
> > - vsca->bpp);
> > - pixel = &sink_frame[index];
> > -
> > - dev_dbg(vsca->ved.dev,
> > - "sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n",
> > - vsca->sd.name, lin, col, index);
> > -
> > - /* point to the place we are going to put the first pixel
> > - * in the scaled src frame
> > - */
> > - lin -= crop_rect.top;
> > - col -= crop_rect.left;
> > - index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult,
> > - crop_rect.width * sca_mult, vsca->bpp);
> > -
> > - dev_dbg(vsca->ved.dev, "sca: %s: scale_pix src pos %dx%d, index %d\n",
> > - vsca->sd.name, lin * sca_mult, col * sca_mult, index);
> > -
> > - /* Repeat this pixel mult times */
> > - for (i = 0; i < sca_mult; i++) {
> > - /* Iterate through each beginning of a
> > - * pixel repetition in a line
> > - */
> > - for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) {
> > - dev_dbg(vsca->ved.dev,
> > - "sca: %s: sca: scale_pix src pos %d\n",
> > - vsca->sd.name, index + j);
> > -
> > - /* copy the pixel to the position index + j */
> > - vimc_sca_fill_pix(&vsca->src_frame[index + j],
> > - pixel, vsca->bpp);
> > - }
> > -
> > - /* move the index to the next line */
> > - index += vsca->src_line_size;
> > - }
> > -}
> > -
> > static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca,
> > const u8 *const sink_frame)
> > {
> > - const struct v4l2_rect r = vsca->crop_rect;
> > - unsigned int i, j;
> > -
> > - /* Scale each pixel from the original sink frame */
> > - /* TODO: implement scale down, only scale up is supported for now */
> > - for (i = r.top; i < r.top + r.height; i++)
> > - for (j = r.left; j < r.left + r.width; j++)
> > - vimc_sca_scale_pix(vsca, i, j, sink_frame);
> > + const struct v4l2_mbus_framefmt *src_fmt = &vsca->fmt[VIMC_SCA_SRC];
> > + const struct v4l2_rect *r = &vsca->crop_rect;
> > + unsigned int snk_width = vsca->fmt[VIMC_SCA_SINK].width;
> > + unsigned int src_x, src_y;
> > + u8 *walker = vsca->src_frame;
> > +
> > + /* Set each pixel at the src_frame to its sink_frame equivalent */
> > + for (src_y = 0; src_y < src_fmt->height; src_y++) {
> > + unsigned int snk_y, y_offset;
> > +
> > + snk_y = (src_y * r->height) / src_fmt->height + r->top;
> > + y_offset = snk_y * snk_width * vsca->bpp;
> > +
> > + for (src_x = 0; src_x < src_fmt->width; src_x++) {
> > + unsigned int snk_x, x_offset, index;
> > +
> > + snk_x = (src_x * r->width) / src_fmt->width + r->left;
> > + x_offset = snk_x * vsca->bpp;
> > + index = y_offset + x_offset;
> > + memcpy(walker, &sink_frame[index], vsca->bpp);
> > + walker += vsca->bpp;
> > + }
> > + }
> > }
> >
> > static void *vimc_sca_process_frame(struct vimc_ent_device *ved,
> > @@ -492,8 +413,8 @@ static struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
> > return ERR_PTR(-ENOMEM);
> >
> > /* Initialize ved and sd */
> > - vsca->pads[0].flags = MEDIA_PAD_FL_SINK;
> > - vsca->pads[1].flags = MEDIA_PAD_FL_SOURCE;
> > + vsca->pads[VIMC_SCA_SINK].flags = MEDIA_PAD_FL_SINK;
> > + vsca->pads[VIMC_SCA_SRC].flags = MEDIA_PAD_FL_SOURCE;
> >
> > ret = vimc_ent_sd_register(&vsca->ved, &vsca->sd, v4l2_dev,
> > vcfg_name,
> > @@ -508,7 +429,8 @@ static struct vimc_ent_device *vimc_sca_add(struct vimc_device *vimc,
> > vsca->ved.dev = vimc->mdev.dev;
> >
> > /* Initialize the frame format */
> > - vsca->sink_fmt = sink_fmt_default;
> > + vsca->fmt[VIMC_SCA_SINK] = fmt_default;
> > + vsca->fmt[VIMC_SCA_SRC] = fmt_default;
> >
> > /* Initialize the crop selection */
> > vsca->crop_rect = crop_rect_default;
>
> --
> Regards,
>
> Laurent Pinchart
Regards,
Pedro
Powered by blists - more mailing lists