Message-Id: <20210901155735.629282-2-angelogioacchino.delregno@somainline.org>
Date:   Wed,  1 Sep 2021 17:57:30 +0200
From:   AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
To:     bjorn.andersson@...aro.org
Cc:     agross@...nel.org, robh+dt@...nel.org, lgirdwood@...il.com,
        broonie@...nel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        phone-devel@...r.kernel.org, konrad.dybcio@...ainline.org,
        marijn.suijten@...ainline.org, jami.kettunen@...ainline.org,
        paul.bouchara@...ainline.org, martin.botka@...ainline.org,
        ~postmarketos/upstreaming@...ts.sr.ht, jeffrey.l.hugo@...il.com,
        robh@...nel.org,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>
Subject: [PATCH v7 1/6] soc: qcom: cpr: Move common functions to new file

In preparation for implementing a new driver that will be handling
CPRv3, CPRv4 and CPR-Hardened, format out common functions to a new
file.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...ainline.org>
---
 drivers/soc/qcom/Makefile     |   2 +-
 drivers/soc/qcom/cpr-common.c | 362 ++++++++++++++++++++++++++++++
 drivers/soc/qcom/cpr-common.h | 111 ++++++++++
 drivers/soc/qcom/cpr.c        | 399 ++--------------------------------
 4 files changed, 497 insertions(+), 377 deletions(-)
 create mode 100644 drivers/soc/qcom/cpr-common.c
 create mode 100644 drivers/soc/qcom/cpr-common.h

diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index ad675a6593d0..8d1262a2e23c 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,7 @@ CFLAGS_rpmh-rsc.o := -I$(src)
 obj-$(CONFIG_QCOM_AOSS_QMP) +=	qcom_aoss.o
 obj-$(CONFIG_QCOM_GENI_SE) +=	qcom-geni-se.o
 obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_CPR)		+= cpr.o
+obj-$(CONFIG_QCOM_CPR)		+= cpr-common.o cpr.o
 obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
diff --git a/drivers/soc/qcom/cpr-common.c b/drivers/soc/qcom/cpr-common.c
new file mode 100644
index 000000000000..41fcc5863e72
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
+#include <linux/nvmem-consumer.h>
+#include "cpr-common.h"
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+			      struct fuse_corner *fuse_corner,
+			      const struct cpr_fuse *cpr_fuse,
+			      int num_fuse_corners)
+{
+	struct fuse_corner *end = fuse_corner + num_fuse_corners;
+	u32 data;
+	int ret;
+
+	for (; fuse_corner < end; fuse_corner++, cpr_fuse++) {
+		ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->ring_osc, &data);
+		if (ret)
+			return ret;
+		fuse_corner->ring_osc_idx = data;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_ring_osc_idx);
+
+int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
+		     int adj, int step_volt, const char *init_v_efuse,
+		     struct device *dev)
+{
+	int steps, uV;
+	u32 bits = 0;
+	int ret;
+
+	ret = nvmem_cell_read_variable_le_u32(dev, init_v_efuse, &bits);
+	if (ret)
+		return ret;
+
+	steps = bits & (BIT(init_v_width - 1) - 1);
+	/* Not two's complement.. instead highest bit is sign bit */
+	if (bits & BIT(init_v_width - 1))
+		steps = -steps;
+
+	uV = ref_uV + steps * step_size_uV;
+
+	/* Apply open-loop fixed adjustments to fused values */
+	uV += adj;
+
+	return DIV_ROUND_UP(uV, step_volt) * step_volt;
+}
+EXPORT_SYMBOL_GPL(cpr_read_fuse_uV);
+
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
+				     int num_fuse_corners)
+{
+	struct cpr_fuse *fuses;
+	int i;
+
+	fuses = devm_kcalloc(dev, num_fuse_corners,
+			     sizeof(struct cpr_fuse),
+			     GFP_KERNEL);
+	if (!fuses)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < num_fuse_corners; i++) {
+		char tbuf[50];
+
+		snprintf(tbuf, sizeof(tbuf), "cpr%d_ring_osc%d", tid, i + 1);
+		fuses[i].ring_osc = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+		if (!fuses[i].ring_osc)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf),
+			 "cpr%d_init_voltage%d", tid, i + 1);
+		fuses[i].init_voltage = devm_kstrdup(dev, tbuf,
+						     GFP_KERNEL);
+		if (!fuses[i].init_voltage)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf), "cpr%d_quotient%d", tid, i + 1);
+		fuses[i].quotient = devm_kstrdup(dev, tbuf, GFP_KERNEL);
+		if (!fuses[i].quotient)
+			return ERR_PTR(-ENOMEM);
+
+		snprintf(tbuf, sizeof(tbuf),
+			 "cpr%d_quotient_offset%d", tid, i + 1);
+		fuses[i].quotient_offset = devm_kstrdup(dev, tbuf,
+							GFP_KERNEL);
+		if (!fuses[i].quotient_offset)
+			return ERR_PTR(-ENOMEM);
+	}
+
+	return fuses;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuses);
+
+int cpr_populate_fuse_common(struct device *dev,
+			     struct fuse_corner_data *fdata,
+			     const struct cpr_fuse *cpr_fuse,
+			     struct fuse_corner *fuse_corner,
+			     int step_volt, int init_v_width,
+			     int init_v_step)
+{
+	int uV, ret;
+
+	/* Populate uV */
+	uV = cpr_read_fuse_uV(init_v_width, init_v_step,
+			      fdata->ref_uV, fdata->volt_oloop_adjust,
+			      step_volt, cpr_fuse->init_voltage, dev);
+	if (uV < 0)
+		return uV;
+
+	/*
+	 * Update SoC voltages: platforms might choose a different
+	 * regulators than the one used to characterize the algorithms
+	 * (ie, init_voltage_step).
+	 */
+	fdata->min_uV = roundup(fdata->min_uV, step_volt);
+	fdata->max_uV = roundup(fdata->max_uV, step_volt);
+
+	fuse_corner->min_uV = fdata->min_uV;
+	fuse_corner->max_uV = fdata->max_uV;
+	fuse_corner->uV = clamp(uV, fuse_corner->min_uV, fuse_corner->max_uV);
+
+	/* Populate target quotient by scaling */
+	ret = nvmem_cell_read_variable_le_u32(dev, cpr_fuse->quotient, &fuse_corner->quot);
+	if (ret)
+		return ret;
+
+	fuse_corner->quot *= fdata->quot_scale;
+	fuse_corner->quot += fdata->quot_offset;
+	fuse_corner->quot += fdata->quot_adjust;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_populate_fuse_common);
+
+/*
+ * Returns: Index of the initial corner or negative number for error.
+ */
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+			    struct corner *corners, int num_corners)
+{
+	unsigned long rate;
+	struct corner *iter, *corner;
+	const struct corner *end;
+	unsigned int ret = 0;
+
+	if (!cpu_clk)
+		return -EINVAL;
+
+	end = &corners[num_corners - 1];
+	rate = clk_get_rate(cpu_clk);
+
+	/*
+	 * Some bootloaders set a CPU clock frequency that is not defined
+	 * in the OPP table. When running at an unlisted frequency,
+	 * cpufreq_online() will change to the OPP which has the lowest
+	 * frequency, at or above the unlisted frequency.
+	 * Since cpufreq_online() always "rounds up" in the case of an
+	 * unlisted frequency, this function always "rounds down" in case
+	 * of an unlisted frequency. That way, when cpufreq_online()
+	 * triggers the first ever call to cpr_set_performance_state(),
+	 * it will correctly determine the direction as UP.
+	 */
+	for (iter = corners; iter <= end; iter++) {
+		if (iter->freq > rate)
+			break;
+		ret++;
+		if (iter->freq == rate) {
+			corner = iter;
+			break;
+		}
+		if (iter->freq < rate)
+			corner = iter;
+	}
+
+	if (!corner) {
+		dev_err(dev, "boot up corner not found\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "boot up perf state: %u\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cpr_find_initial_corner);
+
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid)
+{
+	struct device_node *np;
+	u32 fc;
+
+	np = dev_pm_opp_get_of_node(opp);
+	if (of_property_read_u32_index(np, "qcom,opp-fuse-level", tid, &fc)) {
+		pr_debug("%s: missing 'qcom,opp-fuse-level' property\n",
+			 __func__);
+		fc = 0;
+	}
+
+	of_node_put(np);
+
+	return fc;
+}
+EXPORT_SYMBOL_GPL(cpr_get_fuse_corner);
+
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+				     struct device *cpu_dev)
+{
+	u64 rate = 0;
+	struct device_node *ref_np;
+	struct device_node *desc_np;
+	struct device_node *child_np = NULL;
+	struct device_node *child_req_np = NULL;
+
+	desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!desc_np)
+		return 0;
+
+	ref_np = dev_pm_opp_get_of_node(ref);
+	if (!ref_np)
+		goto out_ref;
+
+	do {
+		of_node_put(child_req_np);
+		child_np = of_get_next_available_child(desc_np, child_np);
+		child_req_np = of_parse_phandle(child_np, "required-opps", 0);
+	} while (child_np && child_req_np != ref_np);
+
+	if (child_np && child_req_np == ref_np)
+		of_property_read_u64(child_np, "opp-hz", &rate);
+
+	of_node_put(child_req_np);
+	of_node_put(child_np);
+	of_node_put(ref_np);
+out_ref:
+	of_node_put(desc_np);
+
+	return (unsigned long) rate;
+}
+EXPORT_SYMBOL_GPL(cpr_get_opp_hz_for_req);
+
+int cpr_calculate_scaling(const char *quot_offset,
+			  struct device *dev,
+			  const struct fuse_corner_data *fdata,
+			  const struct corner *corner)
+{
+	u32 quot_diff = 0;
+	unsigned long freq_diff;
+	int scaling;
+	const struct fuse_corner *fuse, *prev_fuse;
+	int ret;
+
+	fuse = corner->fuse_corner;
+	prev_fuse = fuse - 1;
+
+	if (quot_offset) {
+		ret = nvmem_cell_read_variable_le_u32(dev, quot_offset, &quot_diff);
+		if (ret)
+			return ret;
+
+		quot_diff *= fdata->quot_offset_scale;
+		quot_diff += fdata->quot_offset_adjust;
+	} else {
+		quot_diff = fuse->quot - prev_fuse->quot;
+	}
+
+	freq_diff = fuse->max_freq - prev_fuse->max_freq;
+	freq_diff /= 1000000; /* Convert to MHz */
+	scaling = 1000 * quot_diff / freq_diff;
+	return min(scaling, fdata->max_quot_scale);
+}
+EXPORT_SYMBOL_GPL(cpr_calculate_scaling);
+
+int cpr_interpolate(const struct corner *corner, int step_volt,
+		    const struct fuse_corner_data *fdata)
+{
+	unsigned long f_high, f_low, f_diff;
+	int uV_high, uV_low, uV;
+	u64 temp, temp_limit;
+	const struct fuse_corner *fuse, *prev_fuse;
+
+	fuse = corner->fuse_corner;
+	prev_fuse = fuse - 1;
+
+	f_high = fuse->max_freq;
+	f_low = prev_fuse->max_freq;
+	uV_high = fuse->uV;
+	uV_low = prev_fuse->uV;
+	f_diff = fuse->max_freq - corner->freq;
+
+	/*
+	 * Don't interpolate in the wrong direction. This could happen
+	 * if the adjusted fuse voltage overlaps with the previous fuse's
+	 * adjusted voltage.
+	 */
+	if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
+		return corner->uV;
+
+	temp = f_diff * (uV_high - uV_low);
+	do_div(temp, f_high - f_low);
+
+	/*
+	 * max_volt_scale has units of uV/MHz while freq values
+	 * have units of Hz.  Divide by 1000000 to convert to.
+	 */
+	temp_limit = f_diff * fdata->max_volt_scale;
+	do_div(temp_limit, 1000000);
+
+	uV = uV_high - min(temp, temp_limit);
+	return roundup(uV, step_volt);
+}
+EXPORT_SYMBOL_GPL(cpr_interpolate);
+
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+			       struct fuse_corner *f)
+{
+	int ret;
+
+	ret = regulator_is_supported_voltage(vreg, f->min_uV, f->min_uV);
+	if (!ret) {
+		dev_err(dev, "min uV: %d not supported by regulator\n",
+			f->min_uV);
+		return -EINVAL;
+	}
+
+	ret = regulator_is_supported_voltage(vreg, f->max_uV, f->max_uV);
+	if (!ret) {
+		dev_err(dev, "max uV: %d not supported by regulator\n",
+			f->max_uV);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cpr_check_vreg_constraints);
+
+MODULE_DESCRIPTION("Core Power Reduction (CPR) common");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/cpr-common.h b/drivers/soc/qcom/cpr-common.h
new file mode 100644
index 000000000000..54013b8a8e87
--- /dev/null
+++ b/drivers/soc/qcom/cpr-common.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
+
+enum voltage_change_dir {
+	NO_CHANGE,
+	DOWN,
+	UP,
+};
+
+struct fuse_corner_data {
+	int ref_uV;
+	int max_uV;
+	int min_uV;
+	int range_uV;
+	/* fuse volt: closed/open loop */
+	int volt_cloop_adjust;
+	int volt_oloop_adjust;
+	int max_volt_scale;
+	int max_quot_scale;
+	/* fuse quot */
+	int quot_offset;
+	int quot_scale;
+	int quot_adjust;
+	/* fuse quot_offset */
+	int quot_offset_scale;
+	int quot_offset_adjust;
+};
+
+struct cpr_fuse {
+	char *ring_osc;
+	char *init_voltage;
+	char *quotient;
+	char *quotient_offset;
+};
+
+struct fuse_corner {
+	int min_uV;
+	int max_uV;
+	int uV;
+	int quot;
+	int step_quot;
+	const struct reg_sequence *accs;
+	int num_accs;
+	unsigned long max_freq;
+	u8 ring_osc_idx;
+};
+
+struct corner {
+	int min_uV;
+	int max_uV;
+	int uV;
+	int last_uV;
+	int quot_adjust;
+	u32 save_ctl;
+	u32 save_irq;
+	unsigned long freq;
+	bool is_open_loop;
+	struct fuse_corner *fuse_corner;
+};
+
+struct corner_data {
+	unsigned int fuse_corner;
+	unsigned long freq;
+};
+
+struct acc_desc {
+	unsigned int	enable_reg;
+	u32		enable_mask;
+
+	struct reg_sequence	*config;
+	struct reg_sequence	*settings;
+	int			num_regs_per_fuse;
+};
+
+struct cpr_acc_desc {
+	const struct cpr_desc *cpr_desc;
+	const struct acc_desc *acc_desc;
+};
+
+int cpr_populate_ring_osc_idx(struct device *dev,
+			      struct fuse_corner *fuse_corner,
+			      const struct cpr_fuse *cpr_fuse,
+			      int num_fuse_corners);
+int cpr_read_fuse_uV(int init_v_width, int step_size_uV, int ref_uV,
+		     int adj, int step_volt, const char *init_v_efuse,
+		     struct device *dev);
+const struct cpr_fuse *cpr_get_fuses(struct device *dev, int tid,
+				     int num_fuse_corners);
+int cpr_populate_fuse_common(struct device *dev,
+			     struct fuse_corner_data *fdata,
+			     const struct cpr_fuse *cpr_fuse,
+			     struct fuse_corner *fuse_corner,
+			     int step_volt, int init_v_width,
+			     int init_v_step);
+int cpr_find_initial_corner(struct device *dev, struct clk *cpu_clk,
+			    struct corner *corners, int num_corners);
+u32 cpr_get_fuse_corner(struct dev_pm_opp *opp, u32 tid);
+unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
+				     struct device *cpu_dev);
+int cpr_calculate_scaling(const char *quot_offset,
+			  struct device *dev,
+			  const struct fuse_corner_data *fdata,
+			  const struct corner *corner);
+int cpr_interpolate(const struct corner *corner, int step_volt,
+		    const struct fuse_corner_data *fdata);
+int cpr_check_vreg_constraints(struct device *dev, struct regulator *vreg,
+			       struct fuse_corner *f);
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c
index 4ce8e816154f..57206650bc6a 100644
--- a/drivers/soc/qcom/cpr.c
+++ b/drivers/soc/qcom/cpr.c
@@ -25,6 +25,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/clk.h>
 #include <linux/nvmem-consumer.h>
+#include "cpr-common.h"
 
 /* Register Offsets for RB-CPR and Bit Definitions */
 
@@ -124,45 +125,12 @@
 
 #define FUSE_REVISION_UNKNOWN		(-1)
 
-enum voltage_change_dir {
-	NO_CHANGE,
-	DOWN,
-	UP,
-};
-
-struct cpr_fuse {
-	char *ring_osc;
-	char *init_voltage;
-	char *quotient;
-	char *quotient_offset;
-};
-
-struct fuse_corner_data {
-	int ref_uV;
-	int max_uV;
-	int min_uV;
-	int max_volt_scale;
-	int max_quot_scale;
-	/* fuse quot */
-	int quot_offset;
-	int quot_scale;
-	int quot_adjust;
-	/* fuse quot_offset */
-	int quot_offset_scale;
-	int quot_offset_adjust;
-};
-
 struct cpr_fuses {
 	int init_voltage_step;
 	int init_voltage_width;
 	struct fuse_corner_data *fuse_corner_data;
 };
 
-struct corner_data {
-	unsigned int fuse_corner;
-	unsigned long freq;
-};
-
 struct cpr_desc {
 	unsigned int num_fuse_corners;
 	int min_diff_quot;
@@ -184,44 +152,6 @@ struct cpr_desc {
 	bool reduce_to_corner_uV;
 };
 
-struct acc_desc {
-	unsigned int	enable_reg;
-	u32		enable_mask;
-
-	struct reg_sequence	*config;
-	struct reg_sequence	*settings;
-	int			num_regs_per_fuse;
-};
-
-struct cpr_acc_desc {
-	const struct cpr_desc *cpr_desc;
-	const struct acc_desc *acc_desc;
-};
-
-struct fuse_corner {
-	int min_uV;
-	int max_uV;
-	int uV;
-	int quot;
-	int step_quot;
-	const struct reg_sequence *accs;
-	int num_accs;
-	unsigned long max_freq;
-	u8 ring_osc_idx;
-};
-
-struct corner {
-	int min_uV;
-	int max_uV;
-	int uV;
-	int last_uV;
-	int quot_adjust;
-	u32 save_ctl;
-	u32 save_irq;
-	unsigned long freq;
-	struct fuse_corner *fuse_corner;
-};
-
 struct cpr_drv {
 	unsigned int		num_corners;
 	unsigned int		ref_clk_khz;
@@ -801,50 +731,6 @@ static int cpr_set_performance_state(struct generic_pm_domain *domain,
 	return ret;
 }
 
-static int
-cpr_populate_ring_osc_idx(struct cpr_drv *drv)
-{
-	struct fuse_corner *fuse = drv->fuse_corners;
-	struct fuse_corner *end = fuse + drv->desc->num_fuse_corners;
-	const struct cpr_fuse *fuses = drv->cpr_fuses;
-	u32 data;
-	int ret;
-
-	for (; fuse < end; fuse++, fuses++) {
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->ring_osc, &data);
-		if (ret)
-			return ret;
-		fuse->ring_osc_idx = data;
-	}
-
-	return 0;
-}
-
-static int cpr_read_fuse_uV(const struct cpr_desc *desc,
-			    const struct fuse_corner_data *fdata,
-			    const char *init_v_efuse,
-			    int step_volt,
-			    struct cpr_drv *drv)
-{
-	int step_size_uV, steps, uV;
-	u32 bits = 0;
-	int ret;
-
-	ret = nvmem_cell_read_variable_le_u32(drv->dev, init_v_efuse, &bits);
-	if (ret)
-		return ret;
-
-	steps = bits & ~BIT(desc->cpr_fuses.init_voltage_width - 1);
-	/* Not two's complement.. instead highest bit is sign bit */
-	if (bits & BIT(desc->cpr_fuses.init_voltage_width - 1))
-		steps = -steps;
-
-	step_size_uV = desc->cpr_fuses.init_voltage_step;
-
-	uV = fdata->ref_uV + steps * step_size_uV;
-	return DIV_ROUND_UP(uV, step_volt) * step_volt;
-}
-
 static int cpr_fuse_corner_init(struct cpr_drv *drv)
 {
 	const struct cpr_desc *desc = drv->desc;
@@ -854,7 +740,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	unsigned int step_volt;
 	struct fuse_corner_data *fdata;
 	struct fuse_corner *fuse, *end;
-	int uV;
 	const struct reg_sequence *accs;
 	int ret;
 
@@ -870,23 +755,15 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	fdata = desc->cpr_fuses.fuse_corner_data;
 
 	for (i = 0; fuse <= end; fuse++, fuses++, i++, fdata++) {
-		/*
-		 * Update SoC voltages: platforms might choose a different
-		 * regulators than the one used to characterize the algorithms
-		 * (ie, init_voltage_step).
-		 */
-		fdata->min_uV = roundup(fdata->min_uV, step_volt);
-		fdata->max_uV = roundup(fdata->max_uV, step_volt);
-
-		/* Populate uV */
-		uV = cpr_read_fuse_uV(desc, fdata, fuses->init_voltage,
-				      step_volt, drv);
-		if (uV < 0)
-			return uV;
+		ret = cpr_populate_fuse_common(
+					drv->dev, fdata, fuses,
+					fuse, step_volt,
+					desc->cpr_fuses.init_voltage_width,
+					desc->cpr_fuses.init_voltage_step);
+		if (ret)
+			return ret;
 
-		fuse->min_uV = fdata->min_uV;
-		fuse->max_uV = fdata->max_uV;
-		fuse->uV = clamp(uV, fuse->min_uV, fuse->max_uV);
+		fuse->step_quot = desc->step_quot[fuse->ring_osc_idx];
 
 		if (fuse == end) {
 			/*
@@ -898,16 +775,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 			end->max_uV = max(end->max_uV, end->uV);
 		}
 
-		/* Populate target quotient by scaling */
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, fuses->quotient, &fuse->quot);
-		if (ret)
-			return ret;
-
-		fuse->quot *= fdata->quot_scale;
-		fuse->quot += fdata->quot_offset;
-		fuse->quot += fdata->quot_adjust;
-		fuse->step_quot = desc->step_quot[fuse->ring_osc_idx];
-
 		/* Populate acc settings */
 		fuse->accs = accs;
 		fuse->num_accs = acc_desc->num_regs_per_fuse;
@@ -924,25 +791,9 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 		else if (fuse->uV < fuse->min_uV)
 			fuse->uV = fuse->min_uV;
 
-		ret = regulator_is_supported_voltage(drv->vdd_apc,
-						     fuse->min_uV,
-						     fuse->min_uV);
-		if (!ret) {
-			dev_err(drv->dev,
-				"min uV: %d (fuse corner: %d) not supported by regulator\n",
-				fuse->min_uV, i);
-			return -EINVAL;
-		}
-
-		ret = regulator_is_supported_voltage(drv->vdd_apc,
-						     fuse->max_uV,
-						     fuse->max_uV);
-		if (!ret) {
-			dev_err(drv->dev,
-				"max uV: %d (fuse corner: %d) not supported by regulator\n",
-				fuse->max_uV, i);
-			return -EINVAL;
-		}
+		ret = cpr_check_vreg_constraints(drv->dev, drv->vdd_apc, fuse);
+		if (ret)
+			return ret;
 
 		dev_dbg(drv->dev,
 			"fuse corner %d: [%d %d %d] RO%hhu quot %d squot %d\n",
@@ -953,126 +804,6 @@ static int cpr_fuse_corner_init(struct cpr_drv *drv)
 	return 0;
 }
 
-static int cpr_calculate_scaling(const char *quot_offset,
-				 struct cpr_drv *drv,
-				 const struct fuse_corner_data *fdata,
-				 const struct corner *corner)
-{
-	u32 quot_diff = 0;
-	unsigned long freq_diff;
-	int scaling;
-	const struct fuse_corner *fuse, *prev_fuse;
-	int ret;
-
-	fuse = corner->fuse_corner;
-	prev_fuse = fuse - 1;
-
-	if (quot_offset) {
-		ret = nvmem_cell_read_variable_le_u32(drv->dev, quot_offset, &quot_diff);
-		if (ret)
-			return ret;
-
-		quot_diff *= fdata->quot_offset_scale;
-		quot_diff += fdata->quot_offset_adjust;
-	} else {
-		quot_diff = fuse->quot - prev_fuse->quot;
-	}
-
-	freq_diff = fuse->max_freq - prev_fuse->max_freq;
-	freq_diff /= 1000000; /* Convert to MHz */
-	scaling = 1000 * quot_diff / freq_diff;
-	return min(scaling, fdata->max_quot_scale);
-}
-
-static int cpr_interpolate(const struct corner *corner, int step_volt,
-			   const struct fuse_corner_data *fdata)
-{
-	unsigned long f_high, f_low, f_diff;
-	int uV_high, uV_low, uV;
-	u64 temp, temp_limit;
-	const struct fuse_corner *fuse, *prev_fuse;
-
-	fuse = corner->fuse_corner;
-	prev_fuse = fuse - 1;
-
-	f_high = fuse->max_freq;
-	f_low = prev_fuse->max_freq;
-	uV_high = fuse->uV;
-	uV_low = prev_fuse->uV;
-	f_diff = fuse->max_freq - corner->freq;
-
-	/*
-	 * Don't interpolate in the wrong direction. This could happen
-	 * if the adjusted fuse voltage overlaps with the previous fuse's
-	 * adjusted voltage.
-	 */
-	if (f_high <= f_low || uV_high <= uV_low || f_high <= corner->freq)
-		return corner->uV;
-
-	temp = f_diff * (uV_high - uV_low);
-	do_div(temp, f_high - f_low);
-
-	/*
-	 * max_volt_scale has units of uV/MHz while freq values
-	 * have units of Hz.  Divide by 1000000 to convert to.
-	 */
-	temp_limit = f_diff * fdata->max_volt_scale;
-	do_div(temp_limit, 1000000);
-
-	uV = uV_high - min(temp, temp_limit);
-	return roundup(uV, step_volt);
-}
-
-static unsigned int cpr_get_fuse_corner(struct dev_pm_opp *opp)
-{
-	struct device_node *np;
-	unsigned int fuse_corner = 0;
-
-	np = dev_pm_opp_get_of_node(opp);
-	if (of_property_read_u32(np, "qcom,opp-fuse-level", &fuse_corner))
-		pr_err("%s: missing 'qcom,opp-fuse-level' property\n",
-		       __func__);
-
-	of_node_put(np);
-
-	return fuse_corner;
-}
-
-static unsigned long cpr_get_opp_hz_for_req(struct dev_pm_opp *ref,
-					    struct device *cpu_dev)
-{
-	u64 rate = 0;
-	struct device_node *ref_np;
-	struct device_node *desc_np;
-	struct device_node *child_np = NULL;
-	struct device_node *child_req_np = NULL;
-
-	desc_np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!desc_np)
-		return 0;
-
-	ref_np = dev_pm_opp_get_of_node(ref);
-	if (!ref_np)
-		goto out_ref;
-
-	do {
-		of_node_put(child_req_np);
-		child_np = of_get_next_available_child(desc_np, child_np);
-		child_req_np = of_parse_phandle(child_np, "required-opps", 0);
-	} while (child_np && child_req_np != ref_np);
-
-	if (child_np && child_req_np == ref_np)
-		of_property_read_u64(child_np, "opp-hz", &rate);
-
-	of_node_put(child_req_np);
-	of_node_put(child_np);
-	of_node_put(ref_np);
-out_ref:
-	of_node_put(desc_np);
-
-	return (unsigned long) rate;
-}
-
 static int cpr_corner_init(struct cpr_drv *drv)
 {
 	const struct cpr_desc *desc = drv->desc;
@@ -1110,7 +841,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
 		opp = dev_pm_opp_find_level_exact(&drv->pd.dev, level);
 		if (IS_ERR(opp))
 			return -EINVAL;
-		fc = cpr_get_fuse_corner(opp);
+		fc = cpr_get_fuse_corner(opp, 0);
 		if (!fc) {
 			dev_pm_opp_put(opp);
 			return -EINVAL;
@@ -1186,7 +917,7 @@ static int cpr_corner_init(struct cpr_drv *drv)
 		corner->uV = fuse->uV;
 
 		if (prev_fuse && cdata[i - 1].freq == prev_fuse->max_freq) {
-			scaling = cpr_calculate_scaling(quot_offset, drv,
+			scaling = cpr_calculate_scaling(quot_offset, drv->dev,
 							fdata, corner);
 			if (scaling < 0)
 				return scaling;
@@ -1224,47 +955,6 @@ static int cpr_corner_init(struct cpr_drv *drv)
 	return 0;
 }
 
-static const struct cpr_fuse *cpr_get_fuses(struct cpr_drv *drv)
-{
-	const struct cpr_desc *desc = drv->desc;
-	struct cpr_fuse *fuses;
-	int i;
-
-	fuses = devm_kcalloc(drv->dev, desc->num_fuse_corners,
-			     sizeof(struct cpr_fuse),
-			     GFP_KERNEL);
-	if (!fuses)
-		return ERR_PTR(-ENOMEM);
-
-	for (i = 0; i < desc->num_fuse_corners; i++) {
-		char tbuf[32];
-
-		snprintf(tbuf, 32, "cpr_ring_osc%d", i + 1);
-		fuses[i].ring_osc = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
-		if (!fuses[i].ring_osc)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_init_voltage%d", i + 1);
-		fuses[i].init_voltage = devm_kstrdup(drv->dev, tbuf,
-						     GFP_KERNEL);
-		if (!fuses[i].init_voltage)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_quotient%d", i + 1);
-		fuses[i].quotient = devm_kstrdup(drv->dev, tbuf, GFP_KERNEL);
-		if (!fuses[i].quotient)
-			return ERR_PTR(-ENOMEM);
-
-		snprintf(tbuf, 32, "cpr_quotient_offset%d", i + 1);
-		fuses[i].quotient_offset = devm_kstrdup(drv->dev, tbuf,
-							GFP_KERNEL);
-		if (!fuses[i].quotient_offset)
-			return ERR_PTR(-ENOMEM);
-	}
-
-	return fuses;
-}
-
 static void cpr_set_loop_allowed(struct cpr_drv *drv)
 {
 	drv->loop_disabled = false;
@@ -1296,54 +986,6 @@ static int cpr_init_parameters(struct cpr_drv *drv)
 	return 0;
 }
 
-static int cpr_find_initial_corner(struct cpr_drv *drv)
-{
-	unsigned long rate;
-	const struct corner *end;
-	struct corner *iter;
-	unsigned int i = 0;
-
-	if (!drv->cpu_clk) {
-		dev_err(drv->dev, "cannot get rate from NULL clk\n");
-		return -EINVAL;
-	}
-
-	end = &drv->corners[drv->num_corners - 1];
-	rate = clk_get_rate(drv->cpu_clk);
-
-	/*
-	 * Some bootloaders set a CPU clock frequency that is not defined
-	 * in the OPP table. When running at an unlisted frequency,
-	 * cpufreq_online() will change to the OPP which has the lowest
-	 * frequency, at or above the unlisted frequency.
-	 * Since cpufreq_online() always "rounds up" in the case of an
-	 * unlisted frequency, this function always "rounds down" in case
-	 * of an unlisted frequency. That way, when cpufreq_online()
-	 * triggers the first ever call to cpr_set_performance_state(),
-	 * it will correctly determine the direction as UP.
-	 */
-	for (iter = drv->corners; iter <= end; iter++) {
-		if (iter->freq > rate)
-			break;
-		i++;
-		if (iter->freq == rate) {
-			drv->corner = iter;
-			break;
-		}
-		if (iter->freq < rate)
-			drv->corner = iter;
-	}
-
-	if (!drv->corner) {
-		dev_err(drv->dev, "boot up corner not found\n");
-		return -EINVAL;
-	}
-
-	dev_dbg(drv->dev, "boot up perf state: %u\n", i);
-
-	return 0;
-}
-
 static const struct cpr_desc qcs404_cpr_desc = {
 	.num_fuse_corners = 3,
 	.min_diff_quot = CPR_FUSE_MIN_QUOT_DIFF,
@@ -1531,8 +1173,9 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
 	if (ret)
 		goto unlock;
 
-	ret = cpr_find_initial_corner(drv);
-	if (ret)
+	ret = cpr_find_initial_corner(drv->dev, drv->cpu_clk, drv->corners,
+				      drv->num_corners);
+	if (ret < 0)
 		goto unlock;
 
 	if (acc_desc->config)
@@ -1617,6 +1260,7 @@ static int cpr_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct device *dev = &pdev->dev;
 	struct cpr_drv *drv;
+	const struct cpr_desc *desc;
 	int irq, ret;
 	const struct cpr_acc_desc *data;
 	struct device_node *np;
@@ -1632,6 +1276,7 @@ static int cpr_probe(struct platform_device *pdev)
 	drv->dev = dev;
 	drv->desc = data->cpr_desc;
 	drv->acc_desc = data->acc_desc;
+	desc = drv->desc;
 
 	drv->fuse_corners = devm_kcalloc(dev, drv->desc->num_fuse_corners,
 					 sizeof(*drv->fuse_corners),
@@ -1672,11 +1317,13 @@ static int cpr_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	drv->cpr_fuses = cpr_get_fuses(drv);
+	drv->cpr_fuses = cpr_get_fuses(drv->dev, 0, desc->num_fuse_corners);
 	if (IS_ERR(drv->cpr_fuses))
 		return PTR_ERR(drv->cpr_fuses);
 
-	ret = cpr_populate_ring_osc_idx(drv);
+	ret = cpr_populate_ring_osc_idx(drv->dev, drv->fuse_corners,
+					drv->cpr_fuses,
+					desc->num_fuse_corners);
 	if (ret)
 		return ret;
 
-- 
2.32.0

Powered by blists - more mailing lists