linux-kernel - Re: [PATCH v3 0/4] mmc: pwrseq: sd8787: add support wilc1000 devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <d8bf8840-4b13-7f95-8fe3-243c3d27a2e4@microchip.com>
Date:   Wed, 1 Sep 2021 10:08:10 +0200
From:   Nicolas Ferre <nicolas.ferre@...rochip.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
CC:     Rob Herring <robh+dt@...nel.org>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Ludovic Desroches <ludovic.desroches@...rochip.com>,
        linux-mmc <linux-mmc@...r.kernel.org>,
        DTML <devicetree@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 0/4] mmc: pwrseq: sd8787: add support wilc1000 devices

On 24/08/2021 at 16:56, Ulf Hansson wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea
> <claudiu.beznea@...rochip.com> wrote:
>>
>> Hi,
>>
>> This series adds support for WILC1000 devices on pwrseq-sd8787 driver.
>> WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines.
>> Adapt the sd8787 driver for this by adding a new compatible for WILC1000
>> devices and specify the delay on .data field of struct of_device_id.
>>
>> Thank you,
>> Claudiu Beznea
>>
>> Changes in v3:
>> - fixed dt binding compilation
>>
>> Changes in v2:
>> - changed cover letter title (it was: mmc: pwrseq: sd8787: add support
>>    for selectable)
>> - use new compatible in pwrseq-sd8787 driver instead of adding a new
>>    binding for specifying the delay; with this, the patch 1/1 from v1 is
>>    not necessary
>> - adapt patch 3/3 from this version with the new compatible
>>
>>
>> Claudiu Beznea (3):
>>    dt-bindings: pwrseq-sd8787: add binding for wilc1000
>>    mmc: pwrseq: sd8787: add support for wilc1000
>>    mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
>>
>> Eugen Hristev (1):
>>    ARM: dts: at91: sama5d27_wlsom1: add wifi device
>>
>>   .../bindings/mmc/mmc-pwrseq-sd8787.yaml       |  4 +-
>>   arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi   | 71 +++++++++++++++++++
>>   drivers/mmc/core/Kconfig                      |  2 +-
>>   drivers/mmc/core/pwrseq_sd8787.c              | 11 ++-
>>   4 files changed, 84 insertions(+), 4 deletions(-)
>>
> 
> Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers.

Perfect, we take care of patch 4 through at91 -> arm-soc trees for 5.16 
kernel timeframe.

Best regards,
   Nicolas


-- 
Nicolas Ferre