[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210901123013.329792-3-eugen.hristev@microchip.com>
Date: Wed, 1 Sep 2021 15:30:05 +0300
From: Eugen Hristev <eugen.hristev@...rochip.com>
To: <jic23@...nel.org>, <linux-iio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <nicolas.ferre@...rochip.com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <robh+dt@...nel.org>,
<ludovic.desroches@...rochip.com>,
Eugen Hristev <eugen.hristev@...rochip.com>
Subject: [PATCH v3 02/10] iio: adc: at91-sama5d2_adc: initialize hardware after clock is started
The hw_init hardware init call must happen after the clock is prepared and
enabled. Otherwise, writing to the registers might lead to a block or
external abort.
Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
---
drivers/iio/adc/at91-sama5d2_adc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index ea5ca163d879..1f4d461c2c18 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1833,12 +1833,12 @@ static int at91_adc_probe(struct platform_device *pdev)
goto vref_disable;
}
- at91_adc_hw_init(indio_dev);
-
ret = clk_prepare_enable(st->per_clk);
if (ret)
goto vref_disable;
+ at91_adc_hw_init(indio_dev);
+
platform_set_drvdata(pdev, indio_dev);
ret = at91_adc_buffer_and_trigger_init(&pdev->dev, indio_dev);
--
2.25.1
Powered by blists - more mailing lists