linux-kernel - Re: [PATCH] iscsi_ibft: Fix isa_bus_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <YTE1dzQ7ytQWW4Ow@char.us.oracle.com>
Date:   Thu, 2 Sep 2021 16:35:03 -0400
From:   Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
To:     Mike Rapoport <rppt@...nel.org>
Cc:     linux-kernel@...r.kernel.org, vijayendra.suman@...cle.com,
        mlombard@...hat.com, pjones@...hat.com,
        kernel test robot <lkp@...el.com>
Subject: Re: [PATCH] iscsi_ibft: Fix isa_bus_to_virt not working under ARM

On Thu, Sep 02, 2021 at 08:14:44PM +0300, Mike Rapoport wrote:
> On Thu, Sep 02, 2021 at 02:03:13PM +0000, Konrad Rzeszutek Wilk wrote:
> > The isa_bus_to_virt is only needed under X86 and in fact the code
> > that sets the ibft_phys_addr is only compiled under X86.
> > 
> > As such lets just ifdef the code.
> > 
> > Reported-by: kernel test robot <lkp@...el.com>
> > Reported-by: Vijayendra Suman <vijayendra.suman@...cle.com>
> > CC: Maurizio Lombardi <mlombard@...hat.com>
> > CC: Mike Rapoport <rppt@...nel.org>
> > Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
> > ---
> >  drivers/firmware/iscsi_ibft.c | 22 +++++++++++++++++-----
> >  1 file changed, 17 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
> > index 612a59e213df..7cde1a7a3ab1 100644
> > --- a/drivers/firmware/iscsi_ibft.c
> > +++ b/drivers/firmware/iscsi_ibft.c
> > @@ -86,7 +86,7 @@ MODULE_VERSION(IBFT_ISCSI_VERSION);
> >  
> >  static struct acpi_table_ibft *ibft_addr;
> >  
> > -#ifndef CONFIG_ISCSI_IBFT_FIND
> > +#ifdef CONFIG_ISCSI_IBFT_FIND
> >  phys_addr_t ibft_phys_addr;
> >  #endif
> 
> I think this declaration should be removed after you added
> acpi_find_ibft_region().
> 
> Before your changes we had ibft_phys_addr defined in iscsi_ibft_find.c for
> CONFIG_ISCSI_IBFT_FIND=y and the declaration above was needed to avoid
> compilation error in ibft_init().
> 
> With the only use of ibft_phys_addr hidden under #ifdef CONFIG_ISCSI_IBFT_FIND
> this declaration actually hides ibft_phys_addr defined in
> iscsi_ibft_find.c.

Yes good idea. I think this below will work rather nicely:

>From 799206c1302e8fabfab5a4151e74a2fe90090590 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
Date: Wed, 1 Sep 2021 20:22:11 -0400
Subject: [PATCH] iscsi_ibft: Fix isa_bus_to_virt not working under ARM

The isa_bus_to_virt is only needed under X86 and in fact the code
that sets the ibft_phys_addr is only compiled under X86.

As such lets just ifdef the code.

Reported-by: kernel test robot <lkp@...el.com>
Reported-by: Vijayendra Suman <vijayendra.suman@...cle.com>
CC: Maurizio Lombardi <mlombard@...hat.com>
CC: Mike Rapoport <rppt@...nel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>
---
v2: Remove the ibft_phys_addr as it is defined in iscsi_ibft.h
---
 drivers/firmware/iscsi_ibft.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 612a59e213df..6e9788324fea 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -86,10 +86,6 @@ MODULE_VERSION(IBFT_ISCSI_VERSION);
 
 static struct acpi_table_ibft *ibft_addr;
 
-#ifndef CONFIG_ISCSI_IBFT_FIND
-phys_addr_t ibft_phys_addr;
-#endif
-
 struct ibft_hdr {
 	u8 id;
 	u8 version;
@@ -851,7 +847,21 @@ static void __init acpi_find_ibft_region(void)
 {
 }
 #endif
-
+#ifdef CONFIG_ISCSI_IBFT_FIND
+static int __init acpi_find_isa_region(void)
+{
+	if (ibft_phys_addr) {
+		ibft_addr = isa_bus_to_virt(ibft_phys_addr);
+		return 0;
+	}
+	return -ENODEV;
+}
+#else
+static int __init acpi_find_isa_region(void)
+{
+	return -ENODEV;
+}
+#endif
 /*
  * ibft_init() - creates sysfs tree entries for the iBFT data.
  */
@@ -864,9 +874,7 @@ static int __init ibft_init(void)
 	   is called before ACPI tables are parsed and it only does
 	   legacy finding.
 	*/
-	if (ibft_phys_addr)
-		ibft_addr = isa_bus_to_virt(ibft_phys_addr);
-	else
+	if (acpi_find_isa_region())
 		acpi_find_ibft_region();
 
 	if (ibft_addr) {
-- 
2.27.0