| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210903152430.244937-6-nitesh@redhat.com>
Date: Fri, 3 Sep 2021 11:24:21 -0400
From: Nitesh Narayan Lal <nitesh@...hat.com>
To: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-scsi@...r.kernel.org, netdev@...r.kernel.org,
davem@...emloft.net, ajit.khaparde@...adcom.com,
sriharsha.basavapatna@...adcom.com, somnath.kotur@...adcom.com,
huangguangbin2@...wei.com, huangdaode@...wei.com,
mtosatti@...hat.com, juri.lelli@...hat.com, frederic@...nel.org,
abelits@...vell.com, bhelgaas@...gle.com, rostedt@...dmis.org,
peterz@...radead.org
Cc: nilal@...hat.com, jesse.brandeburg@...el.com, robin.murphy@....com,
mingo@...nel.org, jbrandeb@...nel.org, akpm@...uxfoundation.org,
sfr@...b.auug.org.au, stephen@...workplumber.org,
rppt@...ux.vnet.ibm.com, chris.friesen@...driver.com,
maz@...nel.org, nhorman@...driver.com, pjwaskiewicz@...il.com,
sassmann@...hat.com, thenzl@...hat.com, james.smart@...adcom.com,
dick.kennedy@...adcom.com, jkc@...hat.com, faisal.latif@...el.com,
shiraz.saleem@...el.com, tariqt@...dia.com, ahleihel@...hat.com,
kheib@...hat.com, borisp@...dia.com, saeedm@...dia.com,
tatyana.e.nikolova@...el.com, mustafa.ismail@...el.com,
ahs3@...hat.com, leonro@...dia.com,
chandrakanth.patil@...adcom.com, bjorn.andersson@...aro.org,
chunkuang.hu@...nel.org, yongqiang.niu@...iatek.com,
baolin.wang7@...il.com, poros@...hat.com, minlei@...hat.com,
emilne@...hat.com, jejb@...ux.ibm.com, martin.petersen@...cle.com,
kabel@...nel.org, viresh.kumar@...aro.org, kuba@...nel.org,
kashyap.desai@...adcom.com, sumit.saxena@...adcom.com,
shivasharan.srikanteshwara@...adcom.com,
sathya.prakash@...adcom.com, sreekanth.reddy@...adcom.com,
suganath-prabu.subramani@...adcom.com, tglx@...utronix.de,
ley.foon.tan@...el.com, jbrunet@...libre.com,
johannes@...solutions.net, snelson@...sando.io,
lewis.hanly@...rochip.com, benve@...co.com, _govind@....com,
jassisinghbrar@...il.com
Subject: [PATCH v6 05/14] scsi: mpt3sas: Use irq_set_affinity_and_hint
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:
- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts
- To apply an affinity that it provides
The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity (if not NULL) for the interrupt is an
undocumented side effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Signed-off-by: Nitesh Narayan Lal <nitesh@...hat.com>
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@...adcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 6c82435bc9cc..48b826b3414f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3084,6 +3084,7 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
void
mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
{
+ unsigned int irq;
struct adapter_reply_queue *reply_q, *next;
if (list_empty(&ioc->reply_queue_list))
@@ -3096,9 +3097,10 @@ mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
continue;
}
- if (ioc->smp_affinity_enable)
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- reply_q->msix_index), NULL);
+ if (ioc->smp_affinity_enable) {
+ irq = pci_irq_vector(ioc->pdev, reply_q->msix_index);
+ irq_update_affinity_hint(irq, NULL);
+ }
free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index),
reply_q);
kfree(reply_q);
@@ -3165,18 +3167,15 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index)
* @ioc: per adapter object
*
* The enduser would need to set the affinity via /proc/irq/#/smp_affinity
- *
- * It would nice if we could call irq_set_affinity, however it is not
- * an exported symbol
*/
static void
_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
{
- unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ unsigned int cpu, nr_cpus, nr_msix, index = 0, irq;
struct adapter_reply_queue *reply_q;
- int local_numa_node;
int iopoll_q_count = ioc->reply_queue_count -
ioc->iopoll_q_start_index;
+ const struct cpumask *mask;
if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -3199,11 +3198,11 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
* corresponding to high iops queues.
*/
if (ioc->high_iops_queues) {
- local_numa_node = dev_to_node(&ioc->pdev->dev);
+ mask = cpumask_of_node(dev_to_node(&ioc->pdev->dev));
for (index = 0; index < ioc->high_iops_queues;
index++) {
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- index), cpumask_of_node(local_numa_node));
+ irq = pci_irq_vector(ioc->pdev, index);
+ irq_set_affinity_and_hint(irq, mask);
}
}
--
2.27.0
Powered by blists - more mailing lists