linux-kernel - Re: [PATCH v2 2/6] dt-bindings: memory-controllers: ti,gpmc: Convert to yaml

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_Jsq+HTJhVGrjJ9EdbE0_rpMtpa=nbm7CyObHHEpocy-A3+A@mail.gmail.com>
Date:   Fri, 3 Sep 2021 15:41:45 -0500
From:   Rob Herring <robh@...nel.org>
To:     Roger Quadros <rogerq@...nel.org>
Cc:     Tony Lindgren <tony@...mide.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
        Miquèl Raynal <miquel.raynal@...tlin.com>,
        Nishanth Menon <nm@...com>, Lokesh Vutla <lokeshvutla@...com>,
        devicetree@...r.kernel.org,
        MTD Maling List <linux-mtd@...ts.infradead.org>,
        linux-omap <linux-omap@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/6] dt-bindings: memory-controllers: ti,gpmc: Convert
 to yaml

On Fri, Sep 3, 2021 at 4:35 AM Roger Quadros <rogerq@...nel.org> wrote:
>
> Hi Rob,
>
> On 02/09/2021 22:56, Rob Herring wrote:
> > On Thu, Sep 02, 2021 at 12:56:05PM +0300, Roger Quadros wrote:
> >> Convert omap-gpmc.txt to ti,gpmc.yaml.
> >>
> >> Signed-off-by: Roger Quadros <rogerq@...nel.org>
> >> ---
> >>  .../bindings/memory-controllers/omap-gpmc.txt | 157 --------
> >>  .../bindings/memory-controllers/ti,gpmc.yaml  | 364 ++++++++++++++++++
> >>  .../devicetree/bindings/mtd/gpmc-nand.txt     |   2 +-
> >>  .../devicetree/bindings/mtd/gpmc-nor.txt      |   4 +-
> >>  .../devicetree/bindings/mtd/gpmc-onenand.txt  |   2 +-
> >>  .../devicetree/bindings/net/gpmc-eth.txt      |   4 +-
> >>  6 files changed, 370 insertions(+), 163 deletions(-)
> >>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> >>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >
> >> diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >> new file mode 100644
> >> index 000000000000..b7d43370a95d
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >> @@ -0,0 +1,364 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Texas Instruments GPMC Memory Controller device-tree bindings
> >> +
> >> +maintainers:
> >> +  - Tony Lindgren <tony@...mide.com>
> >> +  - Roger Quadros <rogerq@...nel.org>
> >> +
> >> +description:
> >> +  The GPMC is a unified memory controller dedicated for interfacing
> >> +  with external memory devices like
> >> +  - Asynchronous SRAM-like memories and ASICs
> >> +  - Asynchronous, synchronous, and page mode burst NOR flash
> >> +  - NAND flash
> >> +  - Pseudo-SRAM devices
> >> +
> >> +properties:
> >> +  compatible:
> >> +    items:
> >> +      - enum:
> >> +          - ti,omap2420-gpmc
> >> +          - ti,omap2430-gpmc
> >> +          - ti,omap3430-gpmc
> >> +          - ti,omap4430-gpmc
> >> +          - ti,am3352-gpmc
> >> +
> >> +  reg:
> >> +    items:
> >> +      - description:
> >> +          Configuration registers for the controller.
> >
> > Just 'maxItems: 1' is sufficient.
> >
> >> +
> >> +  interrupts: true
> >
> > Need to define how many.
> >
> >> +
> >> +  clocks:
> >> +    maxItems: 1
> >> +    description: |
> >> +      Functional clock. Used for bus timing calculations and
> >> +      GPMC configuration.
> >> +
> >> +  clock-names:
> >> +    items:
> >> +      - const: fck
> >> +
> >> +  dmas:
> >> +    items:
> >> +      - description: DMA channel for GPMC NAND prefetch
> >> +
> >> +  dma-names:
> >> +    items:
> >> +      - const: rxtx
> >> +
> >> +  "#address-cells":
> >> +    const: 2
> >> +
> >> +  "#size-cells":
> >> +    const: 1
> >> +
> >> +  gpmc,num-cs:
> >> +    description: maximum number of supported chip-select lines.
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +
> >> +  gpmc,num-waitpins:
> >> +    description: maximum number of supported wait pins.
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +
> >> +  ranges:
> >> +    minItems: 1
> >> +    description: |
> >> +      Must be set up to reflect the memory layout with four
> >> +      integer values for each chip-select line in use,
> >> +      <cs-number> 0 <physical address of mapping> <size>
> >> +
> >> +    items:
> >> +      - description: NAND bank 0
> >> +      - description: NOR/SRAM bank 0
> >> +      - description: NOR/SRAM bank 1
> >> +
> >> +  '#interrupt-cells':
> >> +    const: 2
> >> +
> >> +  interrupt-controller:
> >> +    description: |
> >> +      The GPMC driver implements and interrupt controller for
> >> +      the NAND events "fifoevent" and "termcount" plus the
> >> +      rising/falling edges on the GPMC_WAIT pins.
> >> +      The interrupt number mapping is as follows
> >> +      0 - NAND_fifoevent
> >> +      1 - NAND_termcount
> >> +      2 - GPMC_WAIT0 pin edge
> >> +      3 - GPMC_WAIT1 pin edge, and so on.
> >> +
> >> +  '#gpio-cells':
> >> +     const: 2
> >> +
> >> +  gpio-controller:
> >> +    description: |
> >> +      The GPMC driver implements a GPIO controller for the
> >> +      GPMC WAIT pins that can be used as general purpose inputs.
> >> +      0 maps to GPMC_WAIT0 pin.
> >> +
> >> +  ti,hwmods:
> >> +    description:
> >> +      Name of the HWMOD associated with GPMC. This is for legacy
> >> +      omap2/3 platforms only.
> >> +    $ref: /schemas/types.yaml#/definitions/string
> >> +    deprecated: true
> >> +
> >> +  ti,no-idle-on-init:
> >> +    description:
> >> +      Prevent idling the module at init. This is for legacy omap2/3
> >> +      platforms only.
> >> +    type: boolean
> >> +    deprecated: true
> >> +
> >> +patternProperties:
> >> +#  "@[0-3],[a-f0-9]+$":>> +  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$":
>
> >
> > Why the commented regex. There's no need for a full regex as we already
> > do that elsewhere. You only need to define the unit-address format.
>
> This should be
>   "@[0-7],[a-f0-9]+$":
>
> I added the full regex during debug but forgot to take it off.
>
> >
> >> +    type: object
> >> +    description: |
> >> +      The child device node represents the device connected to the GPMC
> >> +      bus. The device can be a NAND controller, SRAM device, NOR device
> >> +      or an ASIC.
> >> +
> >> +    properties:
> >> +      compatible:
> >> +        description:
> >> +          Compatible of attached device.
> >
> > Duh. Drop.
> >
> >> +
> >> +      reg:
> >> +        items:
> >> +        - description: Register access space for the device
> >
> > A device with 2 register ranges isn't allowed?
>
> GPMC is actually a memory controller and we are describing the children here.

Yes, I understand what it is.

> Each child has to have a register range.

What you are saying here with the schema is there is only 1 register
range allowed for the child node. You don't know how many a child
device may have. That's a property of the child device. You just need
'reg: true' here.

Rob