[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9137f113e0cdd718edaa3d32b30bf043@codeaurora.org>
Date: Mon, 06 Sep 2021 16:28:14 +0530
From: skakit@...eaurora.org
To: Stephen Boyd <swboyd@...omium.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
David Collins <collinsd@...eaurora.org>, kgunda@...eaurora.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH V2 2/2] arm64: dts: sc7280: Add volume up support for
sc7280-idp
On 2021-09-03 23:42, Stephen Boyd wrote:
> Quoting satya priya (2021-09-02 02:15:06)
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index 371a2a9..52bcbbc 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -199,6 +199,37 @@
>> modem-init;
>> };
>>
>> +&soc {
>
> 's' comes after 'p' so this is in the wrong place.
>
Okay will move it accordingly.
>> + gpio_keys {
>> + compatible = "gpio-keys";
>> + label = "gpio-keys";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&key_vol_up_default>;
>> +
>> + vol_up {
>> + label = "volume_up";
>> + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
>> + linux,input-type = <1>;
>> + linux,code = <KEY_VOLUMEUP>;
>> + gpio-key,wakeup;
>> + debounce-interval = <15>;
>> + linux,can-disable;
>> + };
>> + };
>> +};
>> +
>> +&pm7325_gpios {
>> + key_vol_up_default: key_vol_up_default {
>
> Please move this to the "PINCTRL - additions to nodes defined in
> sc7280.dtsi" section and then sort alphabetically on node naem.
>
Okay.
>> + pins = "gpio6";
>> + function = "normal";
>> + input-enable;
>> + bias-pull-up;
>> + power-source = <0>;
>> + qcom,drive-strength = <3>;
>> + };
>> +};
>> +
>> &pmk8350_vadc {
>> pmk8350_die_temp {
>> reg = <PMK8350_ADC7_DIE_TEMP>;
Powered by blists - more mailing lists