| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAASAkoYS5Eyn+jf2Q_4CZ4xfjewYgMfEe0LkGkF6fjeOdyoz4A@mail.gmail.com>
Date: Mon, 13 Sep 2021 09:35:00 +0300
From: Alexandru Ardelean <aardelean@...iqon.com>
To: Cai Huoqing <caihuoqing@...du.com>
Cc: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Rob Herring <robh+dt@...nel.org>, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, linux-iio <linux-iio@...r.kernel.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v4 1/3] iio: imx8qxp-adc: Add binding documentation for
NXP IMX8QXP ADC
On Sun, 12 Sept 2021 at 10:13, Cai Huoqing <caihuoqing@...du.com> wrote:
>
> The NXP i.MX 8QuadXPlus SOC a new ADC IP, so add
> binding documentation for NXP IMX8QXP ADC
>
Hey,
Driver looks quite good.
A few notes from me.
Mostly small stuff.
The more important one may be about the indio_dev->name, since that is
ABI related.
> Signed-off-by: Cai Huoqing <caihuoqing@...du.com>
> ---
> v1->v2: *Squash patches 1, 2, 3, and 5 into a single patch.
> *Add device specific prefix.
> *Remove the brackets around individual numbers.
> *Make use of FIELD_PREP() and FIELD_GET().
> *Remove a lot of cache values.
> *Replace mlock with adc->lock.
> *Move adc->value read from isr to the completion.
> *Set pm_runtime_disable/_put_noidle() before adc_disable.
> *Add error handler-err_disable_reg/err_unprepare_clk.
> v2->v3: *Add "return 0" to adc_runtime_resume().
> v3->v4: *Sort header file declarations in alphabetical order.
> *Remove explicitly cast from "void *".
> *Make use of dev_err_probe().
> *Add some blank lines to help readability.
>
> v1 link:
> https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830172140.414-4-caihuoqing@baidu.com/
> v3 link:
> https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210907015724.1377-2-caihuoqing@baidu.com/
>
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/imx8qxp-adc.c | 461 ++++++++++++++++++++++++++++++++++
> 3 files changed, 472 insertions(+)
> create mode 100644 drivers/iio/adc/imx8qxp-adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index af168e1c9fdb..fa8ad63d6ac2 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -530,6 +530,16 @@ config IMX7D_ADC
> This driver can also be built as a module. If so, the module will be
> called imx7d_adc.
>
> +config IMX8QXP_ADC
> + tristate "NXP IMX8QXP ADC driver"
> + depends on ARCH_MXC_ARM64 || COMPILE_TEST
> + depends on HAS_IOMEM
> + help
> + Say yes here to build support for IMX8QXP ADC.
> +
> + This driver can also be built as a module. If so, the module will be
> + called imx8qxp-adc.
> +
> config LP8788_ADC
> tristate "LP8788 ADC driver"
> depends on MFD_LP8788
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index d68550f493e3..d3f53549720c 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
> obj-$(CONFIG_HI8435) += hi8435.o
> obj-$(CONFIG_HX711) += hx711.o
> obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
> +obj-$(CONFIG_IMX8QXP_ADC) += imx8qxp-adc.o
> obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
> obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o
> obj-$(CONFIG_INTEL_MRFLD_ADC) += intel_mrfld_adc.o
> diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c
> new file mode 100644
> index 000000000000..e48cf31b2e4c
> --- /dev/null
> +++ b/drivers/iio/adc/imx8qxp-adc.c
> @@ -0,0 +1,461 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * NXP i.MX8QXP ADC driver
> + *
> + * Based on the work of Haibo Chen <haibo.chen@....com>
> + * The initial developer of the original code is Haibo Chen.
> + * Portions created by Haibo Chen are Copyright (C) 2018 NXP.
> + * All Rights Reserved.
> + *
> + * Copyright (C) 2018 NXP
> + * Copyright (C) 2021 Cai Huoqing
> + */
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <linux/iio/driver.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define ADC_DRIVER_NAME "imx8qxp-adc"
> +
> +/* Register map definition */
> +#define IMX8QXP_ADR_ADC_CTRL 0x10
> +#define IMX8QXP_ADR_ADC_STAT 0x14
> +#define IMX8QXP_ADR_ADC_IE 0x18
> +#define IMX8QXP_ADR_ADC_DE 0x1c
> +#define IMX8QXP_ADR_ADC_CFG 0x20
> +#define IMX8QXP_ADR_ADC_FCTRL 0x30
> +#define IMX8QXP_ADR_ADC_SWTRIG 0x34
> +#define IMX8QXP_ADR_ADC_TCTRL(tid) (0xc0 + tid * 4)
> +#define IMX8QXP_ADR_ADC_CMDH(cid) (0x100 + cid * 8)
> +#define IMX8QXP_ADR_ADC_CMDL(cid) (0x104 + cid * 8)
> +#define IMX8QXP_ADR_ADC_RESFIFO 0x300
> +#define IMX8QXP_ADR_ADC_TST 0xffc
> +
> +/* ADC bit shift */
> +#define IMX8QXP_ADC_IE_FWMIE_MASK GENMASK(1, 0)
> +#define IMX8QXP_ADC_CTRL_FIFO_RESET_MASK BIT(8)
> +#define IMX8QXP_ADC_CTRL_SOFTWARE_RESET_MASK BIT(1)
> +#define IMX8QXP_ADC_CTRL_ADC_EN_MASK BIT(0)
> +#define IMX8QXP_ADC_TCTRL_TCMD_MASK GENMASK(31, 24)
> +#define IMX8QXP_ADC_TCTRL_TDLY_MASK GENMASK(23, 16)
> +#define IMX8QXP_ADC_TCTRL_TPRI_MASK GENMASK(15, 8)
> +#define IMX8QXP_ADC_TCTRL_HTEN_MASK GENMASK(7, 0)
> +#define IMX8QXP_ADC_CMDL_CSCALE_MASK GENMASK(13, 8)
> +#define IMX8QXP_ADC_CMDL_MODE_MASK BIT(7)
> +#define IMX8QXP_ADC_CMDL_DIFF_MASK BIT(6)
> +#define IMX8QXP_ADC_CMDL_ABSEL_MASK BIT(5)
> +#define IMX8QXP_ADC_CMDL_ADCH_MASK GENMASK(2, 0)
> +#define IMX8QXP_ADC_CMDH_NEXT_MASK GENMASK(31, 24)
> +#define IMX8QXP_ADC_CMDH_LOOP_MASK GENMASK(23, 16)
> +#define IMX8QXP_ADC_CMDH_AVGS_MASK GENMASK(15, 12)
> +#define IMX8QXP_ADC_CMDH_STS_MASK BIT(8)
> +#define IMX8QXP_ADC_CMDH_LWI_MASK GENMASK(7, 7)
> +#define IMX8QXP_ADC_CMDH_CMPEN_MASK GENMASK(0, 0)
> +#define IMX8QXP_ADC_CFG_PWREN_MASK BIT(28)
> +#define IMX8QXP_ADC_CFG_PUDLY_MASK GENMASK(23, 16)
> +#define IMX8QXP_ADC_CFG_REFSEL_MASK GENMASK(7, 6)
> +#define IMX8QXP_ADC_CFG_PWRSEL_MASK GENMASK(5, 4)
> +#define IMX8QXP_ADC_CFG_TPRICTRL_MASK GENMASK(3, 0)
> +#define IMX8QXP_ADC_FCTRL_FWMARK_MASK GENMASK(20, 16)
> +#define IMX8QXP_ADC_FCTRL_FCOUNT_MASK GENMASK(4, 0)
> +#define IMX8QXP_ADC_RESFIFO_VAL_MASK GENMASK(18, 3)
> +
> +/* ADC PARAMETER*/
> +#define IMX8QXP_ADC_CMDL_CHANNEL_SCALE_FULL GENMASK(5, 0)
> +#define IMX8QXP_ADC_CMDL_SEL_A_A_B_CHANNEL 0
> +#define IMX8QXP_ADC_CMDL_STANDARD_RESOLUTION 0
> +#define IMX8QXP_ADC_CMDL_MODE_SINGLE 0
> +#define IMX8QXP_ADC_CMDH_LWI_INCREMENT_DIS 0
> +#define IMX8QXP_ADC_CMDH_CMPEN_DIS 0
> +#define IMX8QXP_ADC_PAUSE_EN BIT(31)
> +#define IMX8QXP_ADC_TCTRL_TPRI_PRIORITY_HIGH 0
> +
> +#define IMX8QXP_ADC_TCTRL_HTEN_HW_TIRG_DIS 0
> +
> +#define IMX8QXP_ADC_TIMEOUT msecs_to_jiffies(100)
> +
> +struct imx8qxp_adc {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *clk;
> + struct clk *ipg_clk;
> + struct regulator *vref;
> + struct mutex lock;
> + struct completion completion;
> +};
> +
> +#define IMX8QXP_ADC_CHAN(_idx) { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .channel = (_idx), \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> +}
> +
> +static const struct iio_chan_spec imx8qxp_adc_iio_channels[] = {
> + IMX8QXP_ADC_CHAN(0),
> + IMX8QXP_ADC_CHAN(1),
> + IMX8QXP_ADC_CHAN(2),
> + IMX8QXP_ADC_CHAN(3),
> + IMX8QXP_ADC_CHAN(4),
> + IMX8QXP_ADC_CHAN(5),
> + IMX8QXP_ADC_CHAN(6),
> + IMX8QXP_ADC_CHAN(7),
> +};
> +
> +static void imx8qxp_adc_reset(struct imx8qxp_adc *adc)
> +{
> + u32 ctrl;
> +
> + /*software reset, need to clear the set bit*/
> + ctrl = readl(adc->regs + IMX8QXP_ADR_ADC_CTRL);
> + ctrl |= FIELD_PREP(IMX8QXP_ADC_CTRL_SOFTWARE_RESET_MASK, 1);
> + writel(ctrl, adc->regs + IMX8QXP_ADR_ADC_CTRL);
> + udelay(10);
> + ctrl &= ~FIELD_PREP(IMX8QXP_ADC_CTRL_SOFTWARE_RESET_MASK, 1);
> + writel(ctrl, adc->regs + IMX8QXP_ADR_ADC_CTRL);
> +
> + /* reset the fifo */
> + ctrl |= FIELD_PREP(IMX8QXP_ADC_CTRL_FIFO_RESET_MASK, 1);
> + writel(ctrl, adc->regs + IMX8QXP_ADR_ADC_CTRL);
> +}
> +
> +static void imx8qxp_adc_reg_config(struct imx8qxp_adc *adc, int channel)
> +{
> + u32 adc_cfg, adc_tctrl, adc_cmdl, adc_cmdh;
> +
> + /* ADC configuration */
> + adc_cfg = FIELD_PREP(IMX8QXP_ADC_CFG_PWREN_MASK, 1) |
> + FIELD_PREP(IMX8QXP_ADC_CFG_PUDLY_MASK, 0x80)|
> + FIELD_PREP(IMX8QXP_ADC_CFG_REFSEL_MASK, 0) |
> + FIELD_PREP(IMX8QXP_ADC_CFG_PWRSEL_MASK, 3) |
> + FIELD_PREP(IMX8QXP_ADC_CFG_TPRICTRL_MASK, 0);
> + writel(adc_cfg, adc->regs + IMX8QXP_ADR_ADC_CFG);
> +
> + /* config the trigger control */
> + adc_tctrl = FIELD_PREP(IMX8QXP_ADC_TCTRL_TCMD_MASK, 1) |
> + FIELD_PREP(IMX8QXP_ADC_TCTRL_TDLY_MASK, 0) |
> + FIELD_PREP(IMX8QXP_ADC_TCTRL_TPRI_MASK, IMX8QXP_ADC_TCTRL_TPRI_PRIORITY_HIGH) |
> + FIELD_PREP(IMX8QXP_ADC_TCTRL_HTEN_MASK, IMX8QXP_ADC_TCTRL_HTEN_HW_TIRG_DIS);
> + writel(adc_cfg, adc->regs + IMX8QXP_ADR_ADC_TCTRL(0));
> +
> + /* config the cmd */
> + adc_cmdl = FIELD_PREP(IMX8QXP_ADC_CMDL_CSCALE_MASK, IMX8QXP_ADC_CMDL_CHANNEL_SCALE_FULL) |
> + FIELD_PREP(IMX8QXP_ADC_CMDL_MODE_MASK, IMX8QXP_ADC_CMDL_STANDARD_RESOLUTION) |
> + FIELD_PREP(IMX8QXP_ADC_CMDL_DIFF_MASK, IMX8QXP_ADC_CMDL_MODE_SINGLE) |
> + FIELD_PREP(IMX8QXP_ADC_CMDL_ABSEL_MASK, IMX8QXP_ADC_CMDL_SEL_A_A_B_CHANNEL) |
> + FIELD_PREP(IMX8QXP_ADC_CMDL_ADCH_MASK, channel);
> + writel(adc_cmdl, adc->regs + IMX8QXP_ADR_ADC_CMDL(0));
> +
> + adc_cmdh = FIELD_PREP(IMX8QXP_ADC_CMDH_NEXT_MASK, 0) |
> + FIELD_PREP(IMX8QXP_ADC_CMDH_LOOP_MASK, 0) |
> + FIELD_PREP(IMX8QXP_ADC_CMDH_AVGS_MASK, 7) |
> + FIELD_PREP(IMX8QXP_ADC_CMDH_STS_MASK, 0) |
> + FIELD_PREP(IMX8QXP_ADC_CMDH_LWI_MASK, IMX8QXP_ADC_CMDH_LWI_INCREMENT_DIS) |
> + FIELD_PREP(IMX8QXP_ADC_CMDH_CMPEN_MASK, IMX8QXP_ADC_CMDH_CMPEN_DIS);
> + writel(adc_cmdh, adc->regs + IMX8QXP_ADR_ADC_CMDH(0));
> +}
> +
> +static void imx8qxp_adc_fifo_config(struct imx8qxp_adc *adc)
> +{
> + u32 fifo_ctrl, interrupt_en;
> +
> + fifo_ctrl = readl(adc->regs + IMX8QXP_ADR_ADC_FCTRL);
> + fifo_ctrl &= ~IMX8QXP_ADC_FCTRL_FWMARK_MASK;
> + /* set the watermark level to 1 */
> + fifo_ctrl |= FIELD_PREP(IMX8QXP_ADC_FCTRL_FWMARK_MASK, 0);
> + writel(fifo_ctrl, adc->regs + IMX8QXP_ADR_ADC_FCTRL);
> +
> + /* FIFO Watermark Interrupt Enable */
> + interrupt_en = readl(adc->regs + IMX8QXP_ADR_ADC_IE);
> + interrupt_en |= FIELD_PREP(IMX8QXP_ADC_IE_FWMIE_MASK, 1);
> + writel(interrupt_en, adc->regs + IMX8QXP_ADR_ADC_IE);
> +}
> +
> +static void imx8qxp_adc_disable(struct imx8qxp_adc *adc)
> +{
> + u32 ctrl;
> +
> + ctrl = readl(adc->regs + IMX8QXP_ADR_ADC_CTRL);
> + ctrl &= ~FIELD_PREP(IMX8QXP_ADC_CTRL_ADC_EN_MASK, 1);
> + writel(ctrl, adc->regs + IMX8QXP_ADR_ADC_CTRL);
> +}
> +
> +static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct imx8qxp_adc *adc = iio_priv(indio_dev);
> + struct device *dev = adc->dev;
> +
> + u32 ctrl, vref_uv;
> + long ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + pm_runtime_get_sync(dev);
> +
> + mutex_lock(&adc->lock);
> + reinit_completion(&adc->completion);
> +
> + imx8qxp_adc_reg_config(adc, chan->channel);
> +
> + imx8qxp_adc_fifo_config(adc);
> +
> + /* adc enable */
> + ctrl = readl(adc->regs + IMX8QXP_ADR_ADC_CTRL);
> + ctrl |= FIELD_PREP(IMX8QXP_ADC_CTRL_ADC_EN_MASK, 1);
> + writel(ctrl, adc->regs + IMX8QXP_ADR_ADC_CTRL);
> + /* adc start */
> + writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG);
> +
> + ret = wait_for_completion_interruptible_timeout(&adc->completion,
> + IMX8QXP_ADC_TIMEOUT);
> +
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> +
> + if (ret == 0) {
> + mutex_unlock(&adc->lock);
> + return -ETIMEDOUT;
> + }
> + if (ret < 0) {
> + mutex_unlock(&adc->lock);
> + return ret;
> + }
> +
> + *val = FIELD_GET(IMX8QXP_ADC_RESFIFO_VAL_MASK,
> + readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO));
> +
> + mutex_unlock(&adc->lock);
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + vref_uv = regulator_get_voltage(adc->vref);
i'm curios if we should handle regulator_get_voltage() returning
error/negative here;
> + *val = vref_uv / 1000;
> + *val2 = 12;
> + return IIO_VAL_FRACTIONAL_LOG2;
> +
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + *val = clk_get_rate(adc->clk) / 3;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static irqreturn_t imx8qxp_adc_isr(int irq, void *dev_id)
> +{
> + struct imx8qxp_adc *adc = dev_id;
> +
> + u32 fifo_count;
> +
> + fifo_count = FIELD_GET(IMX8QXP_ADC_FCTRL_FCOUNT_MASK,
> + readl(adc->regs + IMX8QXP_ADR_ADC_FCTRL));
> +
> + if (fifo_count)
> + complete(&adc->completion);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int imx8qxp_adc_reg_access(struct iio_dev *indio_dev, unsigned int reg,
> + unsigned int writeval, unsigned int *readval)
> +{
> + struct imx8qxp_adc *adc = iio_priv(indio_dev);
> + struct device *dev = adc->dev;
> +
> + if (!readval || reg % 4 || reg > IMX8QXP_ADR_ADC_TST)
> + return -EINVAL;
> +
> + pm_runtime_get_sync(dev);
> +
> + *readval = readl(adc->regs + reg);
> +
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> +
> + return 0;
> +}
> +
> +static const struct iio_info imx8qxp_adc_iio_info = {
> + .read_raw = &imx8qxp_adc_read_raw,
> + .debugfs_reg_access = &imx8qxp_adc_reg_access,
> +};
> +
> +static int imx8qxp_adc_probe(struct platform_device *pdev)
> +{
> + struct imx8qxp_adc *adc;
> + struct iio_dev *indio_dev;
> + struct device *dev = &pdev->dev;
> + int irq;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
> + if (!indio_dev) {
> + dev_err(dev, "Failed allocating iio device\n");
> + return -ENOMEM;
> + }
> +
> + adc = iio_priv(indio_dev);
> + adc->dev = dev;
> +
> + mutex_init(&adc->lock);
> + adc->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(adc->regs))
> + return PTR_ERR(adc->regs);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + adc->clk = devm_clk_get(dev, "per");
> + if (IS_ERR(adc->clk))
> + return dev_err_probe(dev, PTR_ERR(adc->clk), "Failed getting clock\n");
> +
> + adc->ipg_clk = devm_clk_get(dev, "ipg");
> + if (IS_ERR(adc->ipg_clk))
> + return dev_err_probe(dev, PTR_ERR(adc->ipg_clk), "Failed getting clock\n");
> +
> + adc->vref = devm_regulator_get(dev, "vref");
> + if (IS_ERR(adc->vref))
> + return dev_err_probe(dev, PTR_ERR(adc->vref), "Failed getting reference voltage\n");
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + init_completion(&adc->completion);
> +
> + indio_dev->name = dev_name(dev);
indio_dev->name is usually the part-name
so maybe ADC_DRIVER_NAME can be used here;
> + indio_dev->info = &imx8qxp_adc_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = imx8qxp_adc_iio_channels;
> + indio_dev->num_channels = ARRAY_SIZE(imx8qxp_adc_iio_channels);
> +
> + ret = devm_request_irq(dev, irq, imx8qxp_adc_isr, 0, dev_name(dev), adc);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed requesting irq, irq = %d\n", irq);
> +
> + imx8qxp_adc_reset(adc);
> +
> + ret = iio_device_register(indio_dev);
> + if (ret) {
> + imx8qxp_adc_disable(adc);
> + return dev_err_probe(dev, ret, "Couldn't register the device.\n");
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_set_autosuspend_delay(dev, 50);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_enable(dev);
> +
> + return 0;
> +}
> +
> +static int imx8qxp_adc_remove(struct platform_device *pdev)
> +{
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> + struct imx8qxp_adc *adc = iio_priv(indio_dev);
> + struct device *dev = adc->dev;
> +
> + pm_runtime_get_sync(dev);
> +
> + iio_device_unregister(indio_dev);
> +
> + pm_runtime_disable(dev);
> + pm_runtime_put_noidle(dev);
> +
> + imx8qxp_adc_disable(adc);
> +
> + return 0;
> +}
> +
> +static int imx8qxp_adc_runtime_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct imx8qxp_adc *adc = iio_priv(indio_dev);
> +
> + imx8qxp_adc_disable(adc);
> +
> + clk_disable_unprepare(adc->clk);
> + clk_disable_unprepare(adc->ipg_clk);
> + regulator_disable(adc->vref);
> +
> + return 0;
> +}
> +
> +static int imx8qxp_adc_runtime_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct imx8qxp_adc *adc = iio_priv(indio_dev);
> + int ret;
> +
> + ret = regulator_enable(adc->vref);
> + if (ret) {
> + dev_err(dev, "Can't enable adc reference top voltage, err = %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(adc->clk);
> + if (ret) {
> + dev_err(dev, "Could not prepare or enable clock.\n");
> + goto err_disable_reg;
> + }
> +
> + ret = clk_prepare_enable(adc->ipg_clk);
> + if (ret) {
> + dev_err(dev, "Could not prepare or enable clock.\n");
> + goto err_unprepare_clk;
> + }
> +
> + imx8qxp_adc_reset(adc);
> +
> + return 0;
> +
> +err_unprepare_clk:
> + clk_disable_unprepare(adc->clk);
> +
> +err_disable_reg:
> + regulator_disable(adc->vref);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops imx8qxp_adc_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(imx8qxp_adc_runtime_suspend, imx8qxp_adc_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id imx8qxp_adc_match[] = {
> + { .compatible = "nxp,imx8qxp-adc", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx8qxp_adc_match);
> +
> +static struct platform_driver imx8qxp_adc_driver = {
> + .probe = imx8qxp_adc_probe,
> + .remove = imx8qxp_adc_remove,
> + .driver = {
> + .name = ADC_DRIVER_NAME,
> + .of_match_table = imx8qxp_adc_match,
> + .pm = &imx8qxp_adc_pm_ops,
> + },
> +};
> +
> +module_platform_driver(imx8qxp_adc_driver);
> +
> +MODULE_DESCRIPTION("i.MX8QuadXPlus ADC driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.25.1
>
Powered by blists - more mailing lists