lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YT8Bt3Fmakn97vi9@aptenodytes>
Date:   Mon, 13 Sep 2021 09:45:59 +0200
From:   Paul Kocialkowski <paul.kocialkowski@...tlin.com>
To:     Chen-Yu Tsai <wens@...e.org>
Cc:     Linux Media Mailing List <linux-media@...r.kernel.org>,
        devicetree <devicetree@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-sunxi@...ts.linux.dev,
        linux-kernel <linux-kernel@...r.kernel.org>,
        linux-phy@...ts.infradead.org,
        linux-clk <linux-clk@...r.kernel.org>,
        linux-staging@...ts.linux.dev, Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Helen Koike <helen.koike@...labora.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH NOT FOR MERGE 13/22] ARM: dts: sun8i: a83t: Add MIPI
 CSI-2 controller node

Hi Chen-Yu,

On Sat 11 Sep 21, 10:53, Chen-Yu Tsai wrote:
> Hi,
> 
> On Sat, Sep 11, 2021 at 2:42 AM Paul Kocialkowski
> <paul.kocialkowski@...tlin.com> wrote:
> >
> > MIPI CSI-2 is supported on the A83T with a dedicated controller that
> > covers both the protocol and D-PHY. It can be connected to the CSI
> > interface as a V4L2 subdev through the fwnode graph.
> >
> > This is not done by default since connecting the bridge without a
> > subdev attached to it will cause a failure on the CSI driver.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> 
> I believe you tagged the wrong patch to not be merged? AFAICT it
> should be the next patch that hooks up OV8865, not this one.

Yes you are definitely right, this patch is good for merge and the next
one is not.

Thanks,

Paul

> > ---
> >  arch/arm/boot/dts/sun8i-a83t.dtsi | 26 ++++++++++++++++++++++++++
> >  1 file changed, 26 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > index ac97eac91349..1fa51f7ef063 100644
> > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> > @@ -1064,6 +1064,32 @@ csi: camera@...0000 {
> >                         status = "disabled";
> >                 };
> >
> > +               mipi_csi2: csi@...1000 {
> > +                       compatible = "allwinner,sun8i-a83t-mipi-csi2";
> > +                       reg = <0x01cb1000 0x1000>;
> > +                       interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&ccu CLK_BUS_CSI>,
> > +                                <&ccu CLK_CSI_SCLK>,
> > +                                <&ccu CLK_MIPI_CSI>,
> > +                                <&ccu CLK_CSI_MISC>;
> > +                       clock-names = "bus", "mod", "mipi", "misc";
> > +                       resets = <&ccu RST_BUS_CSI>;
> > +                       status = "disabled";
> > +
> > +                       ports {
> > +                               #address-cells = <1>;
> > +                               #size-cells = <0>;
> > +
> > +                               mipi_csi2_in: port@0 {
> > +                                       reg = <0>;
> > +                               };
> > +
> > +                               mipi_csi2_out: port@1 {
> > +                                       reg = <1>;
> > +                               };
> > +                       };
> > +               };
> > +
> >                 hdmi: hdmi@...0000 {
> >                         compatible = "allwinner,sun8i-a83t-dw-hdmi";
> >                         reg = <0x01ee0000 0x10000>;
> > --
> > 2.32.0
> >
> >

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ