| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 13 Sep 2021 16:15:19 -0400
From: Dave Jones <davej@...emonkey.org.uk>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>
Subject: Re: Linux 5.15-rc1
On Mon, Sep 13, 2021 at 08:59:49PM +0200, Heiner Kallweit wrote:
> On 13.09.2021 16:18, Dave Jones wrote:
> > [ 186.595296] pci 0000:02:00.0: [144d:a800] type 00 class 0x010601
> > [ 186.595351] pci 0000:02:00.0: reg 0x24: [mem 0xdfc10000-0xdfc11fff]
> > [ 186.595361] pci 0000:02:00.0: reg 0x30: [mem 0xdfc00000-0xdfc0ffff pref]
> > [ 186.595425] pci 0000:02:00.0: PME# supported from D3hot D3cold
> > [ 186.735107] pci 0000:02:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update
>
> Thanks for the report! The stalls may be related to this one. Device is:
> 02:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
>
> With an older kernel you may experience the stall when accessing the vpd
> attribute of this device in sysfs.
>
> Maybe the device indicates VPD capability but doesn't actually support it.
> Could you please provide the "lspci -vv" output for this device?
02:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd XP941 PCIe SSD
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at dfc10000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at dfc00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 25.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x2 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [140 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Kernel driver in use: ahci
> And could you please test with the following applied to verify the
> assumption? It disables VPD access for this device.
>
> ---
> drivers/pci/vpd.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
> index 517789205..fc92e880e 100644
> --- a/drivers/pci/vpd.c
> +++ b/drivers/pci/vpd.c
> @@ -540,6 +540,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, quirk_blacklist_vpd);
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SAMSUNG, 0xa800, quirk_blacklist_vpd);
> /*
> * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
> * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
This didn't help I'm afraid :(
It changed the VPD warning, but that's about it...
[ 184.235496] pci 0000:02:00.0: calling quirk_blacklist_vpd+0x0/0x22 @ 1
[ 184.235499] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 184.235501] pci 0000:02:00.0: quirk_blacklist_vpd+0x0/0x22 took 0 usecs
Dave
Powered by blists - more mailing lists