| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210913223442.435885-8-sashal@kernel.org>
Date: Mon, 13 Sep 2021 18:34:34 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Josef Bacik <josef@...icpanda.com>,
Anand Jain <anand.jain@...cle.com>,
David Sterba <dsterba@...e.com>,
Sasha Levin <sashal@...nel.org>, linux-btrfs@...r.kernel.org
Subject: [PATCH AUTOSEL 5.10 08/16] btrfs: update the bdev time directly when closing
From: Josef Bacik <josef@...icpanda.com>
[ Upstream commit 8f96a5bfa1503e0a5f3c78d51e993a1794d4aff1 ]
We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed. However we do this by re-opening the
block device and calling filp_update_time. This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this. Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_get_by_dev.part.0+0x56/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
file_open_name+0xc7/0x170
filp_open+0x2c/0x50
btrfs_scratch_superblocks.part.0+0x10f/0x170
btrfs_rm_device.cold+0xe8/0xed
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11596:
#0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Anand Jain <anand.jain@...cle.com>
Signed-off-by: Josef Bacik <josef@...icpanda.com>
Reviewed-by: David Sterba <dsterba@...e.com>
Signed-off-by: David Sterba <dsterba@...e.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
fs/btrfs/volumes.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index d1fccddcf403..003960c484a1 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1852,15 +1852,17 @@ static int btrfs_add_dev_item(struct btrfs_trans_handle *trans,
* Function to update ctime/mtime for a given device path.
* Mainly used for ctime/mtime based probe like libblkid.
*/
-static void update_dev_time(const char *path_name)
+static void update_dev_time(struct block_device *bdev)
{
- struct file *filp;
+ struct inode *inode = bdev->bd_inode;
+ struct timespec64 now;
- filp = filp_open(path_name, O_RDWR, 0);
- if (IS_ERR(filp))
+ /* Shouldn't happen but just in case. */
+ if (!inode)
return;
- file_update_time(filp);
- filp_close(filp, NULL);
+
+ now = current_time(inode);
+ generic_update_time(inode, &now, S_MTIME | S_CTIME);
}
static int btrfs_rm_dev_item(struct btrfs_device *device)
@@ -2035,7 +2037,7 @@ void btrfs_scratch_superblocks(struct btrfs_fs_info *fs_info,
btrfs_kobject_uevent(bdev, KOBJ_CHANGE);
/* Update ctime/mtime for device path for libblkid */
- update_dev_time(device_path);
+ update_dev_time(bdev);
}
int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
@@ -2678,7 +2680,7 @@ int btrfs_init_new_device(struct btrfs_fs_info *fs_info, const char *device_path
btrfs_forget_devices(device_path);
/* Update ctime/mtime for blkid or udev */
- update_dev_time(device_path);
+ update_dev_time(bdev);
return ret;
--
2.30.2
Powered by blists - more mailing lists