| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210913082434.GA773070@yilunxu-OptiPlex-7050>
Date: Mon, 13 Sep 2021 16:24:34 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: Tom Rix <trix@...hat.com>
Cc: Russ Weight <russell.h.weight@...el.com>, mdf@...nel.org,
linux-fpga@...r.kernel.org, linux-kernel@...r.kernel.org,
lgoncalv@...hat.com, hao.wu@...el.com, matthew.gerlach@...el.com
Subject: Re: [PATCH v15 4/6] fpga: image-load: add status ioctl
On Sat, Sep 11, 2021 at 11:12:50AM -0700, Tom Rix wrote:
>
> On 9/10/21 4:23 PM, Russ Weight wrote:
> >
> > On 9/10/21 1:50 AM, Xu Yilun wrote:
> > > On Wed, Sep 08, 2021 at 07:18:44PM -0700, Russ Weight wrote:
> > > > Extend the FPGA Image Load class driver to include an
> > > > FPGA_IMAGE_LOAD_STATUS IOCTL that can be used to monitor the progress
> > > > of an ongoing image load. The status returned includes how much data
> > > > remains to be transferred, the progress of the image load, and error
> > > > information in the case of a failure.
> > > >
> > > > Signed-off-by: Russ Weight <russell.h.weight@...el.com>
> > > > ---
> > > > V15:
> > > > - This patch is new to the patchset and provides an FPGA_IMAGE_LOAD_STATUS
> > > > IOCTL to return the current values for: remaining_size, progress,
> > > > err_progress, and err_code.
> > > > - This patch has elements of the following three patches from the previous
> > > > patch-set:
> > > > [PATCH v14 3/6] fpga: sec-mgr: expose sec-mgr update status
> > > > [PATCH v14 4/6] fpga: sec-mgr: expose sec-mgr update errors
> > > > [PATCH v14 5/6] fpga: sec-mgr: expose sec-mgr update size
> > > > - Changed file, symbol, and config names to reflect the new driver name
> > > > - There are some minor changes to locking to enable this ioctl to return
> > > > coherent data.
> > > > ---
> > > > Documentation/fpga/fpga-image-load.rst | 6 +++
> > > > drivers/fpga/fpga-image-load.c | 53 ++++++++++++++++++++++----
> > > > include/uapi/linux/fpga-image-load.h | 18 +++++++++
> > > > 3 files changed, 70 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/Documentation/fpga/fpga-image-load.rst b/Documentation/fpga/fpga-image-load.rst
> > > > index 739d735592a5..3d5eb51223e3 100644
> > > > --- a/Documentation/fpga/fpga-image-load.rst
> > > > +++ b/Documentation/fpga/fpga-image-load.rst
> > > > @@ -31,3 +31,9 @@ updated. This is an exclusive operation; an attempt to start concurrent image
> > > > load for the same device will fail with EBUSY. An eventfd file descriptor
> > > > parameter is provided to this IOCTL, and it will be signalled at the
> > > > completion of the image load.
> > > > +
> > > > +FPGA_IMAGE_LOAD_STATUS:
> > > > +
> > > > +Collect status for an on-going image upload. The status returned includes
> > > > +how much data remains to be transferred, the progress of the image load,
> > > > +and error information in the case of a failure.
> > > > diff --git a/drivers/fpga/fpga-image-load.c b/drivers/fpga/fpga-image-load.c
> > > > index b784456765b0..99a47b21c995 100644
> > > > --- a/drivers/fpga/fpga-image-load.c
> > > > +++ b/drivers/fpga/fpga-image-load.c
> > > > @@ -22,10 +22,27 @@ static dev_t fpga_image_devt;
> > > > #define to_image_load(d) container_of(d, struct fpga_image_load, dev)
> > > > -static void fpga_image_dev_error(struct fpga_image_load *imgld,
> > > > +static void fpga_image_update_progress(struct fpga_image_load *imgld,
> > > > + enum fpga_image_prog new_progress)
> > > > +{
> > > > + mutex_lock(&imgld->lock);
> > > > + imgld->progress = new_progress;
> > > > + mutex_unlock(&imgld->lock);
> > > > +}
> > > > +
> > > > +static void fpga_image_set_error(struct fpga_image_load *imgld,
> > > > enum fpga_image_err err_code)
> > > > {
> > > > + mutex_lock(&imgld->lock);
> > > > + imgld->err_progress = imgld->progress;
> > > > imgld->err_code = err_code;
> > > > + mutex_unlock(&imgld->lock);
> > > > +}
> > > > +
> > > > +static void fpga_image_dev_error(struct fpga_image_load *imgld,
> > > > + enum fpga_image_err err_code)
> > > > +{
> > > > + fpga_image_set_error(imgld, err_code);
> > > > imgld->lops->cancel(imgld);
> > > > }
> > > > @@ -49,18 +66,18 @@ static void fpga_image_do_load(struct work_struct *work)
> > > > get_device(&imgld->dev);
> > > > if (!try_module_get(imgld->dev.parent->driver->owner)) {
> > > > - imgld->err_code = FPGA_IMAGE_ERR_BUSY;
> > > > + fpga_image_set_error(imgld, FPGA_IMAGE_ERR_BUSY);
> > > > goto idle_exit;
> > > > }
> > > > - imgld->progress = FPGA_IMAGE_PROG_PREPARING;
> > > > + fpga_image_update_progress(imgld, FPGA_IMAGE_PROG_PREPARING);
> > > > ret = imgld->lops->prepare(imgld);
> > > > if (ret != FPGA_IMAGE_ERR_NONE) {
> > > > fpga_image_dev_error(imgld, ret);
> > > > goto modput_exit;
> > > > }
> > > > - imgld->progress = FPGA_IMAGE_PROG_WRITING;
> > > > + fpga_image_update_progress(imgld, FPGA_IMAGE_PROG_WRITING);
> > > > while (imgld->remaining_size) {
> > > > ret = imgld->lops->write_blk(imgld, offset);
> > > > if (ret != FPGA_IMAGE_ERR_NONE) {
> > > > @@ -71,7 +88,7 @@ static void fpga_image_do_load(struct work_struct *work)
> > > > offset = size - imgld->remaining_size;
> > > > }
> > > > - imgld->progress = FPGA_IMAGE_PROG_PROGRAMMING;
> > > > + fpga_image_update_progress(imgld, FPGA_IMAGE_PROG_PROGRAMMING);
> > > > ret = imgld->lops->poll_complete(imgld);
> > > > if (ret != FPGA_IMAGE_ERR_NONE)
> > > > fpga_image_dev_error(imgld, ret);
> > > > @@ -151,20 +168,42 @@ static int fpga_image_load_ioctl_write(struct fpga_image_load *imgld,
> > > > return ret;
> > > > }
> > > > +static int fpga_image_load_ioctl_status(struct fpga_image_load *imgld,
> > > > + unsigned long arg)
> > > > +{
> > > > + struct fpga_image_status status;
> > > > +
> > > > + memset(&status, 0, sizeof(status));
> > > > + status.progress = imgld->progress;
> > > > + status.remaining_size = imgld->remaining_size;
> > > > + status.err_progress = imgld->err_progress;
> > > > + status.err_code = imgld->err_code;
> > > > +
> > > > + if (copy_to_user((void __user *)arg, &status, sizeof(status)))
> > > > + return -EFAULT;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > static long fpga_image_load_ioctl(struct file *filp, unsigned int cmd,
> > > > unsigned long arg)
> > > > {
> > > > struct fpga_image_load *imgld = filp->private_data;
> > > > int ret = -ENOTTY;
> > > > + mutex_lock(&imgld->lock);
> > > > +
> > > > switch (cmd) {
> > > > case FPGA_IMAGE_LOAD_WRITE:
> > > > - mutex_lock(&imgld->lock);
> > > > ret = fpga_image_load_ioctl_write(imgld, arg);
> > > > - mutex_unlock(&imgld->lock);
> > > > + break;
> > > > + case FPGA_IMAGE_LOAD_STATUS:
> > > > + ret = fpga_image_load_ioctl_status(imgld, arg);
> > > > break;
> > > > }
> > > > + mutex_unlock(&imgld->lock);
> > > > +
> > > > return ret;
> > > > }
> > > > diff --git a/include/uapi/linux/fpga-image-load.h b/include/uapi/linux/fpga-image-load.h
> > > > index a60da115adf5..6a995bcc0fb7 100644
> > > > --- a/include/uapi/linux/fpga-image-load.h
> > > > +++ b/include/uapi/linux/fpga-image-load.h
> > > > @@ -38,6 +38,7 @@ enum fpga_image_err {
> > > > };
> > > > #define FPGA_IMAGE_LOAD_WRITE _IOW(FPGA_IMAGE_LOAD_MAGIC, 0, struct fpga_image_write)
> > > > +#define FPGA_IMAGE_LOAD_STATUS _IOR(FPGA_IMAGE_LOAD_MAGIC, 1, struct fpga_image_status)
> > > > /**
> > > > * FPGA_IMAGE_LOAD_WRITE - _IOW(FPGA_IMAGE_LOAD_MAGIC, 0,
> > > > @@ -56,4 +57,21 @@ struct fpga_image_write {
> > > > __u64 buf; /* User space address of source data */
> > > > };
> > > > +/**
> > > > + * FPGA_IMAGE_LOAD_STATUS - _IOR(FPGA_IMAGE_LOAD_MAGIC, 1,
> > > > + * struct fpga_image_status)
> > > > + *
> > > > + * Request status information for an ongoing update.
> > > > + * data buffer, size, and an eventfd file descriptor.
> > > This line is a typo.
> > Thanks - I'll fix it.
> > > > + *
> > > > + * Return: 0 on success, -errno on failure.
> > > > + */
> > > > +struct fpga_image_status {
> > > > + /* Output */
> > > > + __u32 remaining_size; /* size remaining to transfer */
> > > > + enum fpga_image_prog progress; /* current progress of image load */
> > > > + enum fpga_image_prog err_progress; /* progress at time of error */
> > > > + enum fpga_image_err err_code; /* error code */
> > > Should we use __u32 for these enumeration types?
> > We could, but I did see a lot of uapi header file examples that use
> > enum for IOCTL structures. Is there a reason to prefer __u32? If I change
> > these to __u32, then I suppose I need to change from enum declarations to
> > #define macros?
>
> The __u32 makes sure the struct is a constant size.
>
> yes, change the enums to #defines.
>
> The layout of a new api should be consistent with similar older api.
>
> review uapi/linux/fpga-dfl.h , the dfl_fpga_port_region_info struct.
Thanks for clarification, yes this is what I expect.
Thanks,
Yilun
Powered by blists - more mailing lists