linux-kernel - Re: [PATCH 20/22] staging: media: Add support for the Allwinner A31 ISP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 13 Sep 2021 10:31:35 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
        linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-clk@...r.kernel.org, linux-staging@...ts.linux.dev,
        Yong Deng <yong.deng@...ewell.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Hans Verkuil <hans.verkuil@...co.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Helen Koike <helen.koike@...labora.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH 20/22] staging: media: Add support for the Allwinner A31
 ISP

On Fri, Sep 10, 2021 at 08:41:45PM +0200, Paul Kocialkowski wrote:
> Some Allwinner platforms come with an Image Signal Processor, which
> supports various features in order to enhance and transform data
> received by image sensors into good-looking pictures. In most cases,
> the data is raw bayer, which gets internally converted to RGB and
> finally YUV, which is what the hardware produces.
> 
> This driver supports ISPs that are similar to the A31 ISP, which was
> the first standalone ISP found in Allwinner platforms. Simpler ISP
> blocks were found in the A10 and A20, where they are tied to a CSI
> controller. Newer generations of Allwinner SoCs (starting with the
> H6, H616, etc) come with a new camera subsystem and revised ISP.
> Even though these previous and next-generation ISPs are somewhat
> similar to the A31 ISP, they have enough significant differences to
> be out of the scope of this driver.
> 
> While the ISP supports many features, including 3A and many
> enhancement blocks, this implementation is limited to the following:
> - V3s (V3/S3) platform support;
> - Bayer media bus formats as input;
> - Semi-planar YUV (NV12/NV21) as output;
> - Debayering with per-component gain and offset configuration;
> - 2D noise filtering with configurable coefficients.
> 
> Since many features are missing from the associated uAPI, the driver
> is aimed to integrate staging until all features are properly
> described.

We can add new features/interfaces to a !staging driver. Why do you
think staging is required?

> On the technical side, it uses the v4l2 and media controller APIs,
> with a video node for capture, a processor subdev and a video node
> for parameters submission. A specific uAPI structure and associated
> v4l2 meta format are used to configure parameters of the supported
> modules.

This meta format needs to be documented

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)