Message-ID: <YUDdNcymLE2i9Yti@kroah.com>
Date:   Tue, 14 Sep 2021 19:34:45 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Doug Anderson <dianders@...omium.org>
Cc:     LKML <linux-kernel@...r.kernel.org>,
        "# 4.0+" <stable@...r.kernel.org>,
        Andrzej Hajda <a.hajda@...sung.com>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Sasha Levin <sashal@...nel.org>
Subject: Re: [PATCH 5.14 147/334] drm/bridge: ti-sn65dsi86: Dont read EDID
 blob over DDC

On Tue, Sep 14, 2021 at 10:24:35AM -0700, Doug Anderson wrote:
> Hi,
> 
> On Tue, Sep 14, 2021 at 9:27 AM Greg Kroah-Hartman
> <gregkh@...uxfoundation.org> wrote:
> >
> > On Mon, Sep 13, 2021 at 09:31:03AM -0700, Doug Anderson wrote:
> > > Hi,
> > >
> > > On Mon, Sep 13, 2021 at 9:09 AM Greg Kroah-Hartman
> > > <gregkh@...uxfoundation.org> wrote:
> > > >
> > > > On Mon, Sep 13, 2021 at 06:57:20AM -0700, Doug Anderson wrote:
> > > > > Hi,
> > > > >
> > > > > On Mon, Sep 13, 2021 at 6:51 AM Greg Kroah-Hartman
> > > > > <gregkh@...uxfoundation.org> wrote:
> > > > > >
> > > > > > From: Douglas Anderson <dianders@...omium.org>
> > > > > >
> > > > > > [ Upstream commit a70e558c151043ce46a5e5999f4310e0b3551f57 ]
> > > > > >
> > > > > > This is really just a revert of commit 58074b08c04a ("drm/bridge:
> > > > > > ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts.
> > > > > >
> > > > > > The old code failed to read the EDID properly in a very important
> > > > > > case: before the bridge's pre_enable() was called. The way things need
> > > > > > to work:
> > > > > > 1. Read the EDID.
> > > > > > 2. Based on the EDID, decide on video settings and pixel clock.
> > > > > > 3. Enable the bridge w/ the desired settings.
> > > > > >
> > > > > > The way things were working:
> > > > > > 1. Try to read the EDID but fail; fall back to hardcoded values.
> > > > > > 2. Based on hardcoded values, decide on video settings and pixel clock.
> > > > > > 3. Enable the bridge w/ the desired settings.
> > > > > > 4. Try again to read the EDID, it works now!
> > > > > > 5. Realize that the hardcoded settings weren't quite right.
> > > > > > 6. Disable / reenable the bridge w/ the right settings.
> > > > > >
> > > > > > The reasons for the failures were twofold:
> > > > > > a) Since we never ran the bridge chip's pre-enable then we never set
> > > > > >    the bit to ignore HPD. This meant the bridge chip didn't even _try_
> > > > > >    to go out on the bus and communicate with the panel.
> > > > > > b) Even if we fixed things to ignore HPD, the EDID still wouldn't read
> > > > > >    if the panel wasn't on.
> > > > > >
> > > > > > Instead of reverting the code, we could fix it to set the HPD bit and
> > > > > > also power on the panel. However, it also works nicely to just let the
> > > > > > panel code read the EDID. Now that we've split the driver up we can
> > > > > > expose the DDC AUX channel bus to the panel node. The panel can take
> > > > > > charge of reading the EDID.
> > > > > >
> > > > > > NOTE: in order for things to work, anyone that needs to read the EDID
> > > > > > will need to instantiate their panel using the new DP AUX bus (AKA by
> > > > > > listing their panel under the "aux-bus" node of the bridge chip in the
> > > > > > device tree).
> > > > > >
> > > > > > In the future if we want to use the bridge chip to provide a full
> > > > > > external DP port (which won't have a panel) then we will have to
> > > > > > conditinally add EDID reading back in.
> > > > > >
> > > > > > Suggested-by: Andrzej Hajda <a.hajda@...sung.com>
> > > > > > Signed-off-by: Douglas Anderson <dianders@...omium.org>
> > > > > > Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > > > > > Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c25f65bb318eff57f0616500f83eac3cc@changeid
> > > > > > Signed-off-by: Sasha Levin <sashal@...nel.org>
> > > > > > ---
> > > > > >  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 22 ----------------------
> > > > > >  1 file changed, 22 deletions(-)
> > > > >
> > > > > I guess it's not a huge deal, but I did respond to Sasha and request
> > > > > that this patch be dropped from the stable queue unless the whole big
> > > > > pile of patches was being backported. See:
> > > > >
> > > > > https://lore.kernel.org/lkml/CAD=FV=U2dGjeEzp+K1vnLTj8oPJ-GKBTTKz2XQ1OZ7QF_sTHuw@mail.gmail.com/
> > > > >
> > > > > I said:
> > > > >
> > > > > > I would suggest against backporting this one unless you're going to
> > > > > > backport the whole pile of DP AUX bus patches, which probably doesn't
> > > > > > make sense for stable. Even though the old EDID reading was broken for
> > > > > > the first read, it still worked for later reads. ...and the first read
> > > > > . didn't crash or anything--it just timed out.
> > > >
> > > > I see a "bunch" of patches for this driver in this -rc, did Sasha not
> > > > get them all?  If not, I can drop this one, but maybe it was needed for
> > > > the follow-on patches?
> > >
> > > It's been a long journey trying to make this bridge work better. I
> > > think the easiest way to say it is that if you don't have the parent
> > > of ${SUBJECT} patch, AKA:
> > >
> > > e0bbcc6233f7 drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus
> > >
> > > ...then you don't have DP AUX bus support and you shouldn't take
> > > ${SUBJECT} patch. If you have that patch and it compiles / builds then
> > > it means that you have all the proper dependencies. However, there are
> > > _a lot_ of dependencies and I wouldn't suggest picking them all to
> > > stable unless it's critical for someone.
> >
> > I tried to drop this one, and it turned out to be a depandancy for
> > another patch for this driver.  And that was another dependancy.  So
> > I've now dropped all of these from the queue.
> 
> Ugh. :(
> 
> 
> > Here are the commits I dropped.  If you think any should be added back,
> > please let us know:
> >
> > 05a7f4a8dff1 ("devlink: Break parameter notification sequence to be before/after unload/load driver")
> 
> I don't understand what the "devlink" patch had to do with
> ti-sn65dsi86. I'll assume you didn't intend to have it in your list.

Odd, good point, I think I messed up in removing too many patches, let
me go add that back...

thanks,

greg k-h

Powered by blists - more mailing lists