lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 14 Sep 2021 11:46:42 +0200
From:   Anders Roxell <anders.roxell@...aro.org>
To:     Robin Murphy <robin.murphy@....com>
Cc:     sudeep.holla@....com,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        liviu.dudau@....com,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        linux-stable <stable@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Sasha Levin <sashal@...nel.org>, Arnd Bergmann <arnd@...db.de>,
        lkft-triage@...ts.linaro.org,
        Linux Kernel Functional Testing <lkft@...aro.org>
Subject: Re: [PATCH 2/2] arm64: dts: juno: Enable more SMMUs

On Fri, 30 Jul 2021 at 16:44, Robin Murphy <robin.murphy@....com> wrote:
>
> On 2021-07-30 15:34, Anders Roxell wrote:
> > On 2021-07-30 13:17, Robin Murphy wrote:
> >> On 2021-07-30 12:35, Anders Roxell wrote:
> >>> From: Robin Murphy <robin.murphy@....com>
> >>>
> >>>> Now that PCI inbound window restrictions are handled generically between
> >>>> the of_pci resource parsing and the IOMMU layer, and described in the
> >>>> Juno DT, we can finally enable the PCIe SMMU without the risk of DMA
> >>>> mappings inadvertently allocating unusable addresses.
> >>>>
> >>>> Similarly, the relevant support for IOMMU mappings for peripheral
> >>>> transfers has been hooked up in the pl330 driver for ages, so we can
> >>>> happily enable the DMA SMMU without that breaking anything either.
> >>>>
> >>>> Signed-off-by: Robin Murphy <robin.murphy@....com>
> >>>
> >>> When we build a kernel with 64k page size and run the ltp syscalls we
> >>> sporadically see a kernel crash while doing a mkfs on a connected SATA
> >>> drive.  This is happening every third test run on any juno-r2 device in
> >>> the lab with the same kernel image (stable-rc 5.13.y, mainline and next)
> >>> with gcc-11.
> >>
> >> Hmm, I guess 64K pages might make a difference in that we'll chew through
> >> IOVA space a lot faster with small mappings...
> >>
> >> I'll have to try to reproduce this locally, since the interesting thing
> >> would be knowing what DMA address it was trying to use that went wrong, but
> >> IOMMU tracepoints and/or dma-debug are going to generate an crazy amount of
> >> data to sift through and try to correlate - having done it before it's not
> >> something I'd readily ask someone else to do for me :)
> >>
> >> On a hunch, though, does it make any difference if you remove the first
> >> entry from the PCIe "dma-ranges" (the 0x2c1c0000 one)?
> >
> > I did this change, and run the job 7 times and could not reproduce the
> > issue.
>
> Thanks! And hold that thought; if it works then I suspect it probably is
> the best fix, but I'll double-check and write it up properly next week.

I just want to send a friendly reminder to this issue, since I haven't
seen a patch for this.
We still see the issue on v5.13.y and above.

Or have I missed anything?

Cheers,
Anders

>
> Cheers,
> Robin.
>
> > diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> > index 8e7a66943b01..d3148730e951 100644
> > --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> > +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> > @@ -545,8 +545,7 @@ pcie_ctlr: pcie@...00000 {
> >                           <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
> >                           <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
> >                  /* Standard AXI Translation entries as programmed by EDK2 */
> > -               dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
> > -                            <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
> > +               dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
> >                               <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
> >                  #interrupt-cells = <1>;
> >                  interrupt-map-mask = <0 0 0 7>;
> >
> >
> > Cheers,
> > Anders
> >

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ