| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 15 Sep 2021 14:47:08 -0400
From: <min.li.xe@...esas.com>
To: <arnd@...db.de>, <gregkh@...uxfoundation.org>,
<derek.kiernan@...inx.com>, <dragan.cvetic@...inx.com>
CC: <linux-kernel@...r.kernel.org>, <lee.jones@...aro.or>,
Min Li <min.li.xe@...esas.com>
Subject: [PATCH misc v2 1/2] mfd: rsmu: Resolve naming conflict between idt8a340_reg.h and idt82p33_reg.h
From: Min Li <min.li.xe@...esas.com>
Signed-off-by: Min Li <min.li.xe@...esas.com>
---
Change log
-resolve name conflicts so that rsmu misc driver can be in one c file suggested by Greg
include/linux/mfd/idt82p33_reg.h | 148 ++++++++++++++++++++-------------------
1 file changed, 75 insertions(+), 73 deletions(-)
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
index 129a6c0..ded0ab8 100644
--- a/include/linux/mfd/idt82p33_reg.h
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -7,106 +7,108 @@
#ifndef HAVE_IDT82P33_REG
#define HAVE_IDT82P33_REG
+#define SABRE_REG_ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
+
/* Register address */
-#define DPLL1_TOD_CNFG 0x134
-#define DPLL2_TOD_CNFG 0x1B4
+#define SABRE_DPLL1_TOD_CNFG 0x134
+#define SABRE_DPLL2_TOD_CNFG 0x1B4
-#define DPLL1_TOD_STS 0x10B
-#define DPLL2_TOD_STS 0x18B
+#define SABRE_DPLL1_TOD_STS 0x10B
+#define SABRE_DPLL2_TOD_STS 0x18B
-#define DPLL1_TOD_TRIGGER 0x115
-#define DPLL2_TOD_TRIGGER 0x195
+#define SABRE_DPLL1_TOD_TRIGGER 0x115
+#define SABRE_DPLL2_TOD_TRIGGER 0x195
-#define DPLL1_OPERATING_MODE_CNFG 0x120
-#define DPLL2_OPERATING_MODE_CNFG 0x1A0
+#define SABRE_DPLL1_OPERATING_MODE_CNFG 0x120
+#define SABRE_DPLL2_OPERATING_MODE_CNFG 0x1A0
-#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
-#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
+#define SABRE_DPLL1_HOLDOVER_FREQ_CNFG 0x12C
+#define SABRE_DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
-#define DPLL1_PHASE_OFFSET_CNFG 0x143
-#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
+#define SABRE_DPLL1_PHASE_OFFSET_CNFG 0x143
+#define SABRE_DPLL2_PHASE_OFFSET_CNFG 0x1C3
-#define DPLL1_SYNC_EDGE_CNFG 0x140
-#define DPLL2_SYNC_EDGE_CNFG 0x1C0
+#define SABRE_DPLL1_SYNC_EDGE_CNFG 0x140
+#define SABRE_DPLL2_SYNC_EDGE_CNFG 0x1C0
-#define DPLL1_INPUT_MODE_CNFG 0x116
-#define DPLL2_INPUT_MODE_CNFG 0x196
+#define SABRE_DPLL1_INPUT_MODE_CNFG 0x116
+#define SABRE_DPLL2_INPUT_MODE_CNFG 0x196
-#define DPLL1_OPERATING_STS 0x102
-#define DPLL2_OPERATING_STS 0x182
+#define SABRE_DPLL1_OPERATING_STS 0x102
+#define SABRE_DPLL2_OPERATING_STS 0x182
-#define DPLL1_CURRENT_FREQ_STS 0x103
-#define DPLL2_CURRENT_FREQ_STS 0x183
+#define SABRE_DPLL1_CURRENT_FREQ_STS 0x103
+#define SABRE_DPLL2_CURRENT_FREQ_STS 0x183
-#define REG_SOFT_RESET 0X381
+#define SABRE_REG_SOFT_RESET 0X381
-#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+#define SABRE_OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
/* Register bit definitions */
-#define SYNC_TOD BIT(1)
-#define PH_OFFSET_EN BIT(7)
-#define SQUELCH_ENABLE BIT(5)
+#define SABRE_SYNC_TOD BIT(1)
+#define SABRE_PH_OFFSET_EN BIT(7)
+#define SABRE_SQUELCH_ENABLE BIT(5)
/* Bit definitions for the DPLL_MODE register */
-#define PLL_MODE_SHIFT (0)
-#define PLL_MODE_MASK (0x1F)
-#define COMBO_MODE_EN BIT(5)
-#define COMBO_MODE_SHIFT (6)
-#define COMBO_MODE_MASK (0x3)
+#define SABRE_PLL_MODE_SHIFT (0)
+#define SABRE_PLL_MODE_MASK (0x1F)
+#define SABRE_COMBO_MODE_EN BIT(5)
+#define SABRE_COMBO_MODE_SHIFT (6)
+#define SABRE_COMBO_MODE_MASK (0x3)
/* Bit definitions for DPLL_OPERATING_STS register */
-#define OPERATING_STS_MASK (0x7)
-#define OPERATING_STS_SHIFT (0x0)
+#define SABRE_OPERATING_STS_MASK (0x7)
+#define SABRE_OPERATING_STS_SHIFT (0x0)
/* Bit definitions for DPLL_TOD_TRIGGER register */
-#define READ_TRIGGER_MASK (0xF)
-#define READ_TRIGGER_SHIFT (0x0)
-#define WRITE_TRIGGER_MASK (0xF0)
-#define WRITE_TRIGGER_SHIFT (0x4)
+#define SABRE_READ_TRIGGER_MASK (0xF)
+#define SABRE_READ_TRIGGER_SHIFT (0x0)
+#define SABRE_WRITE_TRIGGER_MASK (0xF0)
+#define SABRE_WRITE_TRIGGER_SHIFT (0x4)
/* Bit definitions for REG_SOFT_RESET register */
-#define SOFT_RESET_EN BIT(7)
-
-enum pll_mode {
- PLL_MODE_MIN = 0,
- PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
- PLL_MODE_FORCE_FREERUN = 1,
- PLL_MODE_FORCE_HOLDOVER = 2,
- PLL_MODE_FORCE_LOCKED = 4,
- PLL_MODE_FORCE_PRE_LOCKED2 = 5,
- PLL_MODE_FORCE_PRE_LOCKED = 6,
- PLL_MODE_FORCE_LOST_PHASE = 7,
- PLL_MODE_DCO = 10,
- PLL_MODE_WPH = 18,
- PLL_MODE_MAX = PLL_MODE_WPH,
+#define SABRE_SOFT_RESET_EN BIT(7)
+
+enum sabre_pll_mode {
+ SABRE_PLL_MODE_MIN = 0,
+ SABRE_PLL_MODE_AUTOMATIC = SABRE_PLL_MODE_MIN,
+ SABRE_PLL_MODE_FORCE_FREERUN = 1,
+ SABRE_PLL_MODE_FORCE_HOLDOVER = 2,
+ SABRE_PLL_MODE_FORCE_LOCKED = 4,
+ SABRE_PLL_MODE_FORCE_PRE_LOCKED2 = 5,
+ SABRE_PLL_MODE_FORCE_PRE_LOCKED = 6,
+ SABRE_PLL_MODE_FORCE_LOST_PHASE = 7,
+ SABRE_PLL_MODE_DCO = 10,
+ SABRE_PLL_MODE_WPH = 18,
+ SABRE_PLL_MODE_MAX = SABRE_PLL_MODE_WPH,
};
-enum hw_tod_trig_sel {
- HW_TOD_TRIG_SEL_MIN = 0,
- HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
- HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
- HW_TOD_TRIG_SEL_SYNC_SEL = 1,
- HW_TOD_TRIG_SEL_IN12 = 2,
- HW_TOD_TRIG_SEL_IN13 = 3,
- HW_TOD_TRIG_SEL_IN14 = 4,
- HW_TOD_TRIG_SEL_TOD_PPS = 5,
- HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
- HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
- HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
- HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
- HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
- WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+enum sabre_hw_tod_trig_sel {
+ SABRE_HW_TOD_TRIG_SEL_MIN = 0,
+ SABRE_HW_TOD_TRIG_SEL_NO_WRITE = SABRE_HW_TOD_TRIG_SEL_MIN,
+ SABRE_HW_TOD_TRIG_SEL_NO_READ = SABRE_HW_TOD_TRIG_SEL_MIN,
+ SABRE_HW_TOD_TRIG_SEL_SYNC_SEL = 1,
+ SABRE_HW_TOD_TRIG_SEL_IN12 = 2,
+ SABRE_HW_TOD_TRIG_SEL_IN13 = 3,
+ SABRE_HW_TOD_TRIG_SEL_IN14 = 4,
+ SABRE_HW_TOD_TRIG_SEL_TOD_PPS = 5,
+ SABRE_HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
+ SABRE_HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
+ SABRE_HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
+ SABRE_HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
+ SABRE_HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = SABRE_HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+ SABRE_WR_TRIG_SEL_MAX = SABRE_HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
};
/** @brief Enumerated type listing DPLL operational modes */
-enum dpll_state {
- DPLL_STATE_FREERUN = 1,
- DPLL_STATE_HOLDOVER = 2,
- DPLL_STATE_LOCKED = 4,
- DPLL_STATE_PRELOCKED2 = 5,
- DPLL_STATE_PRELOCKED = 6,
- DPLL_STATE_LOSTPHASE = 7,
- DPLL_STATE_MAX
+enum sabre_dpll_state {
+ SABRE_DPLL_STATE_FREERUN = 1,
+ SABRE_DPLL_STATE_HOLDOVER = 2,
+ SABRE_DPLL_STATE_LOCKED = 4,
+ SABRE_DPLL_STATE_PRELOCKED2 = 5,
+ SABRE_DPLL_STATE_PRELOCKED = 6,
+ SABRE_DPLL_STATE_LOSTPHASE = 7,
+ SABRE_DPLL_STATE_MAX
};
#endif
--
2.7.4
Powered by blists - more mailing lists