lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 15 Sep 2021 17:51:13 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Jonathan Cameron <jic23@...nel.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Nuno Sa <Nuno.Sa@...log.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH v3 10/14] iio: adc: max1027: Prevent single channel accesses during buffer reads

When hardware buffers are enabled (the cnvst pin being the trigger), one
should not mess with the device state by requesting a single channel
read.

There is already a iio_buffer_enabled() check in *_read_single_value()
to merely prevent this situation but the check is inconsistent since
buffers can be enabled after the if clause anyway. Instead, use the core
mutex by calling iio_device_claim/release_direct_mode().

Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 drivers/iio/adc/max1027.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 254df6a28cd8..c7663e5dd38a 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -310,10 +310,9 @@ static int max1027_read_single_value(struct iio_dev *indio_dev,
 	int ret;
 	struct max1027_state *st = iio_priv(indio_dev);
 
-	if (iio_buffer_enabled(indio_dev)) {
-		dev_warn(&indio_dev->dev, "trigger mode already enabled");
-		return -EBUSY;
-	}
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 
 	/* Configure conversion register with the requested chan */
 	st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) |
@@ -324,6 +323,7 @@ static int max1027_read_single_value(struct iio_dev *indio_dev,
 	if (ret < 0) {
 		dev_err(&indio_dev->dev,
 			"Failed to configure conversion register\n");
+		iio_device_release_direct_mode(indio_dev);
 		return ret;
 	}
 
@@ -336,6 +336,9 @@ static int max1027_read_single_value(struct iio_dev *indio_dev,
 
 	/* Read result */
 	ret = spi_read(st->spi, st->buffer, (chan->type == IIO_TEMP) ? 4 : 2);
+
+	iio_device_release_direct_mode(indio_dev);
+
 	if (ret < 0)
 		return ret;
 
-- 
2.27.0

Powered by blists - more mailing lists