linux-kernel - Re: [PATCH v4 0/3] extcon: usbc-tusb320: Initial TUSB320L support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <46b969d0-9039-67e4-53f9-c461718ff089@gmail.com>
Date:   Thu, 16 Sep 2021 02:22:42 +0900
From:   Chanwoo Choi <cwchoi00@...il.com>
To:     Yassine Oudjana <y.oudjana@...tonmail.com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Michael Auchter <michael.auchter@...com>,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v4 0/3] extcon: usbc-tusb320: Initial TUSB320L support

On 21. 9. 2. 오전 1:13, Yassine Oudjana wrote:
> The TUSB320L is a newer chip with additional features. It is close enough to TUSB320 so it works
> to some extent out-of-the-box, but for some reason it can start in UFP mode which is not desirable.
> 
> This series adds support for reset and mode setting for both chips, and does that while probing
> to ensure the chip starts with the default mode of following the PORT pin.
> 
> Changes since v3:
>   - Remove unused tusb_modes.
>   - Remove extra blank line.
> Changes since v2:
>   - Read state before setting default mode, then update it again after resetting.
>   - Remove mode tracing from irq handler
>   - Add a delay after reset to handle tSOFT_RESET
>   - Use a separate mode setting function for each of TUSB320 and TUSB320L.
> Changes since v1:
>   - Split first patch into two patches, one adding support for mode setting and reset on TUSB320,
>     and the other adding support for TUSB320L.
>   - Fix dt_binding_check warning:
>     ../Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml:15:6: [warning] wrong indentation: expected 6 but found 5 (indentation)
> 
> Yassine Oudjana (3):
>    extcon: usbc-tusb320: Add support for mode setting and reset
>    extcon: usbc-tusb320: Add support for TUSB320L
>    dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible string
> 
>   .../bindings/extcon/extcon-usbc-tusb320.yaml  |   4 +-
>   drivers/extcon/extcon-usbc-tusb320.c          | 156 +++++++++++++++++-
>   2 files changed, 154 insertions(+), 6 deletions(-)
> 

Applied them. Thanks.

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi