| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210916155822.026530170@linuxfoundation.org>
Date: Thu, 16 Sep 2021 18:01:19 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Chris Chiu <chris.chiu@...onical.com>,
Kalle Valo <kvalo@...eaurora.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.14 330/432] rtl8xxxu: Fix the handling of TX A-MPDU aggregation
From: Chris Chiu <chris.chiu@...onical.com>
[ Upstream commit 95a581ab3592082c60a08090aabe09ac7d0bd650 ]
The TX A-MPDU aggregation is not handled in the driver since the
ieee80211_start_tx_ba_session has never been started properly.
Start and stop the TX BA session by tracking the TX aggregation
status of each TID. Fix the ampdu_action and the tx descriptor
accordingly with the given TID.
Signed-off-by: Chris Chiu <chris.chiu@...onical.com>
Signed-off-by: Kalle Valo <kvalo@...eaurora.org>
Link: https://lore.kernel.org/r/20210804151325.86600-1-chris.chiu@canonical.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 ++
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 33 ++++++++++++++-----
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 01735776345a..7ddce3c3f0c4 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1378,6 +1378,8 @@ struct rtl8xxxu_priv {
u8 no_pape:1;
u8 int_buf[USB_INTR_CONTENT_LENGTH];
u8 rssi_level;
+ DECLARE_BITMAP(tx_aggr_started, IEEE80211_NUM_TIDS);
+ DECLARE_BITMAP(tid_tx_operational, IEEE80211_NUM_TIDS);
/*
* Only one virtual interface permitted because only STA mode
* is supported and no iface_combinations are provided.
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index ac1061caacd6..3285a91efb91 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4805,6 +4805,8 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4828,7 +4830,7 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
- if (ampdu_enable)
+ if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
else
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
@@ -4876,6 +4878,8 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct rtl8xxxu_txdesc40 *tx_desc40;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
@@ -4902,7 +4906,7 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
- if (ampdu_enable)
+ if (ampdu_enable && test_bit(tid, priv->tid_tx_operational))
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
else
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
@@ -5015,12 +5019,19 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
if (sta->ht_cap.ht_supported) {
u32 ampdu, val32;
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
ampdu = (u32)sta->ht_cap.ampdu_density;
val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
tx_desc->txdw2 |= cpu_to_le32(val32);
ampdu_enable = true;
+
+ if (!test_bit(tid, priv->tx_aggr_started) &&
+ !(skb->protocol == cpu_to_be16(ETH_P_PAE)))
+ if (!ieee80211_start_tx_ba_session(sta, tid, 0))
+ set_bit(tid, priv->tx_aggr_started);
}
}
@@ -6096,6 +6107,7 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct device *dev = &priv->udev->dev;
u8 ampdu_factor, ampdu_density;
struct ieee80211_sta *sta = params->sta;
+ u16 tid = params->tid;
enum ieee80211_ampdu_mlme_action action = params->action;
switch (action) {
@@ -6108,17 +6120,20 @@ rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev_dbg(dev,
"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
ampdu_factor, ampdu_density);
- break;
+ return IEEE80211_AMPDU_TX_START_IMMEDIATE;
+ case IEEE80211_AMPDU_TX_STOP_CONT:
case IEEE80211_AMPDU_TX_STOP_FLUSH:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
- rtl8xxxu_set_ampdu_factor(priv, 0);
- rtl8xxxu_set_ampdu_min_space(priv, 0);
- break;
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
- dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
- __func__);
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP\n", __func__);
rtl8xxxu_set_ampdu_factor(priv, 0);
rtl8xxxu_set_ampdu_min_space(priv, 0);
+ clear_bit(tid, priv->tx_aggr_started);
+ clear_bit(tid, priv->tid_tx_operational);
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_OPERATIONAL\n", __func__);
+ set_bit(tid, priv->tid_tx_operational);
break;
case IEEE80211_AMPDU_RX_START:
dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
--
2.30.2
Powered by blists - more mailing lists