| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210916183550.15349-9-sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Thu, 16 Sep 2021 11:35:46 -0700
From: Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
x86@...nel.org, Paolo Bonzini <pbonzini@...hat.com>,
Juergen Gross <jgross@...e.com>, Deep Shah <sdeep@...are.com>,
VMware Inc <pv-drivers@...are.com>,
Vitaly Kuznetsov <vkuznets@...hat.com>,
Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
Joerg Roedel <joro@...tes.org>
Cc: Peter H Anvin <hpa@...or.com>, Dave Hansen <dave.hansen@...el.com>,
Tony Luck <tony.luck@...el.com>,
Dan Williams <dan.j.williams@...el.com>,
Andi Kleen <ak@...ux.intel.com>,
Kirill Shutemov <kirill.shutemov@...ux.intel.com>,
Sean Christopherson <seanjc@...gle.com>,
Kuppuswamy Sathyanarayanan <knsathya@...nel.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH v7 08/12] x86/tdx: Add HLT support for TDX guest
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
Per Guest-Host-Communication Interface (GHCI) for Intel Trust
Domain Extensions (Intel TDX) specification, sec 3.8,
TDVMCALL[Instruction.HLT] provides HLT operation. Use it to implement
halt() and safe_halt() paravirtualization calls.
The same TDX hypercall is used to handle #VE exception due to
EXIT_REASON_HLT.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
Reviewed-by: Andi Kleen <ak@...ux.intel.com>
Reviewed-by: Tony Luck <tony.luck@...el.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
---
Changes since v6:
* None
Changes since v5:
* Replaced sti with STI in commit log and comments.
* Added comments for _tdx_hypercall() usage in _tdx_halt().
* Added new helper function _tdx_halt() to contain common
code between tdx_halt() and tdx_safe_halt().
* Renamed tdg_->tdx_.
* Removed BUG_ON() and used WARN_ONCE() for HLT emulation
failure.
Changes since v4:
* Added exception for EXIT_REASON_HLT in __tdx_hypercall() to
enable interrupts using sti.
Changes since v3:
* None
arch/x86/kernel/tdcall.S | 30 +++++++++++++++++++
arch/x86/kernel/tdx.c | 65 ++++++++++++++++++++++++++++++++++++++--
2 files changed, 93 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/tdcall.S b/arch/x86/kernel/tdcall.S
index 2e70133bebf2..1b9649ec2e29 100644
--- a/arch/x86/kernel/tdcall.S
+++ b/arch/x86/kernel/tdcall.S
@@ -40,6 +40,9 @@
*/
#define tdcall .byte 0x66,0x0f,0x01,0xcc
+/* HLT TDVMCALL sub-function ID */
+#define EXIT_REASON_HLT 12
+
/*
* __tdx_module_call() - Helper function used by TDX guests to request
* services from the TDX module (does not include VMM services).
@@ -240,6 +243,33 @@ SYM_FUNC_START(__tdx_hypercall)
movl $TDVMCALL_EXPOSE_REGS_MASK, %ecx
+ /*
+ * For the idle loop STI needs to be called directly before
+ * the TDCALL that enters idle (EXIT_REASON_HLT case). STI
+ * enables interrupts only one instruction later. If there
+ * are any instructions between the STI and the TDCALL for
+ * HLT then an interrupt could happen in that time, but the
+ * code would go back to sleep afterwards, which can cause
+ * longer delays.
+ *
+ * This leads to significant difference in network performance
+ * benchmarks. So add a special case for EXIT_REASON_HLT to
+ * trigger STI before TDCALL. But this change is not required
+ * for all HLT cases. So use R15 register value to identify the
+ * case which needs STI. So, if R11 is EXIT_REASON_HLT and R15
+ * is 1, then call STI before TDCALL instruction. Note that R15
+ * register is not required by TDCALL ABI when triggering the
+ * hypercall for EXIT_REASON_HLT case. So use it in software to
+ * select the STI case.
+ */
+ cmpl $EXIT_REASON_HLT, %r11d
+ jne skip_sti
+ cmpl $1, %r15d
+ jne skip_sti
+ /* Set R15 register to 0, it is unused in EXIT_REASON_HLT case */
+ xor %r15, %r15
+ sti
+skip_sti:
tdcall
/* Restore output pointer to R9 */
diff --git a/arch/x86/kernel/tdx.c b/arch/x86/kernel/tdx.c
index 8d29ed07af1c..ec1008cc42d9 100644
--- a/arch/x86/kernel/tdx.c
+++ b/arch/x86/kernel/tdx.c
@@ -5,6 +5,7 @@
#define pr_fmt(fmt) "x86/tdx: " fmt
#include <asm/tdx.h>
+#include <asm/vmx.h>
/* TDX Module call Leaf IDs */
#define TDGETVEINFO 3
@@ -44,6 +45,52 @@ static inline bool cpuid_has_tdx_guest(void)
return !memcmp("IntelTDX ", sig, 12);
}
+static __cpuidle void _tdx_halt(const bool irq_disabled, const bool do_sti)
+{
+ u64 ret;
+
+ /*
+ * Emulate HLT operation via hypercall. More info about ABI
+ * can be found in TDX Guest-Host-Communication Interface
+ * (GHCI), sec 3.8.
+ *
+ * The VMM uses the "IRQ disabled" param to understand IRQ
+ * enabled status (RFLAGS.IF) of TD guest and determine
+ * whether or not it should schedule the halted vCPU if an
+ * IRQ becomes pending. E.g. if IRQs are disabled the VMM
+ * can keep the vCPU in virtual HLT, even if an IRQ is
+ * pending, without hanging/breaking the guest.
+ *
+ * do_sti parameter is used by __tdx_hypercall() to decide
+ * whether to call STI instruction before executing TDCALL
+ * instruction.
+ */
+ ret = _tdx_hypercall(EXIT_REASON_HLT, irq_disabled, 0, 0, do_sti, NULL);
+
+ /*
+ * Use WARN_ONCE() to report the failure. Since tdx_*halt() calls
+ * are also used in pv_ops, #VE handler error handler cannot be
+ * used to report the failure.
+ */
+ WARN_ONCE(ret, "HLT instruction emulation failed\n");
+}
+
+static __cpuidle void tdx_halt(void)
+{
+ const bool irq_disabled = irqs_disabled();
+ const bool do_sti = false;
+
+ _tdx_halt(irq_disabled, do_sti);
+}
+
+static __cpuidle void tdx_safe_halt(void)
+{
+ const bool irq_disabled = false; /* since sti will be called */
+ const bool do_sti = true;
+
+ _tdx_halt(irq_disabled, do_sti);
+}
+
unsigned long tdx_get_ve_info(struct ve_info *ve)
{
struct tdx_module_output out = {0};
@@ -70,8 +117,19 @@ unsigned long tdx_get_ve_info(struct ve_info *ve)
int tdx_handle_virtualization_exception(struct pt_regs *regs,
struct ve_info *ve)
{
- pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
- return -EFAULT;
+ switch (ve->exit_reason) {
+ case EXIT_REASON_HLT:
+ tdx_halt();
+ break;
+ default:
+ pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);
+ return -EFAULT;
+ }
+
+ /* After successful #VE handling, move the IP */
+ regs->ip += ve->instr_len;
+
+ return 0;
}
void __init tdx_early_init(void)
@@ -81,5 +139,8 @@ void __init tdx_early_init(void)
setup_force_cpu_cap(X86_FEATURE_TDX_GUEST);
+ pv_ops.irq.safe_halt = tdx_safe_halt;
+ pv_ops.irq.halt = tdx_halt;
+
pr_info("Guest initialized\n");
}
--
2.25.1
Powered by blists - more mailing lists