Message-ID: <16b2aad3-3957-5136-993f-d57639c4f738@redhat.com>
Date:   Thu, 16 Sep 2021 15:26:16 +0200
From:   Hans de Goede <hdegoede@...hat.com>
To:     sumesh.k.naduvalath@...el.com, mgross@...ux.intel.com,
        srinivas.pandruvada@...ux.intel.com
Cc:     srinivas.pandruvada@...el.com, platform-driver-x86@...r.kernel.org,
        linux-kernel@...r.kernel.org, ganapathi.chinnu@...el.com,
        nachiketa.kumar@...el.com
Subject: Re: [PATCH v4 1/1] ishtp: Add support for Intel ishtp eclite driver

Hi,

On 9/13/21 7:10 AM, sumesh.k.naduvalath@...el.com wrote:
> From: "K Naduvalath, Sumesh" <sumesh.k.naduvalath@...el.com>
> 
> This driver is for accessing the PSE (Programmable Service Engine) - an
> Embedded Controller like IP - using ISHTP (Integratd Sensor Hub Transport
> Protocol) to get battery, thermal and UCSI (USB Type-C Connector System
> Software Interface) related data from the platform.
> 
> Signed-off-by: K Naduvalath, Sumesh <sumesh.k.naduvalath@...el.com>
> Reviewed-by: Mark Gross <mgross@...ux.intel.com>

Thank you for your patch, I've applied this patch to my review-hans 
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans


> ---
> Changes:
> 
> v4:
> -intel_ishtp_eclite.c ==> intel/ishtp_eclite.c
> -Cosmetic changes to Kconfig text
> 
> v3:
> -Moved acpi_dev_put() to the end of ecl_ishtp_cl_remove
> -Registering ishtp event callback moved after acpi_find_eclite_device() call
> -cancel_work_sync for event and reset works moved after ishtp cl deinit
> 
> v2:
> -Decoupled ACPI device search with acpi_find_device() and cache adev
> -Opregion context is protected with lock for both cmd and data handlers
> -Opregion length check added in various functions
> -ishtp_get_device and ishtp_put_device are removed
> -acpi_walk_dep_device_list() changed to acpi_dev_clear_dependencies()
> -Kconfig text, cosmetic and minor corrections
> 
> v1:
> -Initial Version
> 
>  MAINTAINERS                               |   6 +
>  drivers/platform/x86/intel/Kconfig        |  16 +
>  drivers/platform/x86/intel/Makefile       |   1 +
>  drivers/platform/x86/intel/ishtp_eclite.c | 701 ++++++++++++++++++++++
>  4 files changed, 724 insertions(+)
>  create mode 100644 drivers/platform/x86/intel/ishtp_eclite.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index eeb4c70b3d5b..f99b327e82c7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9479,6 +9479,12 @@ L:	linux-crypto@...r.kernel.org
>  S:	Maintained
>  F:	drivers/crypto/ixp4xx_crypto.c
>  
> +INTEL ISHTP ECLITE DRIVER
> +M:	Sumesh K Naduvalath <sumesh.k.naduvalath@...el.com>
> +L:	platform-driver-x86@...r.kernel.org
> +S:	Supported
> +F:	drivers/platform/x86/intel/ishtp_eclite.c
> +
>  INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
>  M:	Krzysztof Halasa <khalasa@...p.pl>
>  S:	Maintained
> diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
> index 0b21468e1bd0..38ce3e344589 100644
> --- a/drivers/platform/x86/intel/Kconfig
> +++ b/drivers/platform/x86/intel/Kconfig
> @@ -102,6 +102,22 @@ config INTEL_CHTDC_TI_PWRBTN
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called intel_chtdc_ti_pwrbtn.
>  
> +config INTEL_ISHTP_ECLITE
> +	tristate "Intel ISHTP eclite controller Driver"
> +	depends on INTEL_ISH_HID
> +	depends on ACPI
> +	help
> +	  This driver is for accessing the PSE (Programmable Service Engine) -
> +	  an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub
> +	  Transport Protocol) to get battery, thermal and UCSI (USB Type-C
> +	  Connector System Software Interface) related data from the platform.
> +	  Users who don't want to use discrete Embedded Controller on Intel's
> +	  Elkhartlake platform can leverage this integrated solution of
> +	  ECLite which is part of PSE subsystem.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called intel_ishtp_eclite.
> +
>  config INTEL_MRFLD_PWRBTN
>  	tristate "Intel Merrifield Basin Cove power button driver"
>  	depends on INTEL_SOC_PMIC_MRFLD
> diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
> index 8b3a3f7bab49..7c24be2423d8 100644
> --- a/drivers/platform/x86/intel/Makefile
> +++ b/drivers/platform/x86/intel/Makefile
> @@ -21,6 +21,7 @@ intel-vbtn-y				:= vbtn.o
>  obj-$(CONFIG_INTEL_VBTN)		+= intel-vbtn.o
>  
>  # Intel miscellaneous drivers
> +obj-$(CONFIG_INTEL_ISHTP_ECLITE)	+= ishtp_eclite.o
>  intel_int0002_vgpio-y			:= int0002_vgpio.o
>  obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
>  intel_oaktrail-y			:= oaktrail.o
> diff --git a/drivers/platform/x86/intel/ishtp_eclite.c b/drivers/platform/x86/intel/ishtp_eclite.c
> new file mode 100644
> index 000000000000..12fc98a48657
> --- /dev/null
> +++ b/drivers/platform/x86/intel/ishtp_eclite.c
> @@ -0,0 +1,701 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Intel ECLite opregion driver for talking to ECLite firmware running on
> + * Intel Integrated Sensor Hub (ISH) using ISH Transport Protocol (ISHTP)
> + *
> + * Copyright (c) 2021, Intel Corporation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/intel-ish-client-if.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/suspend.h>
> +#include <linux/types.h>
> +#include <linux/uuid.h>
> +#include <linux/uaccess.h>
> +
> +#define ECLITE_DATA_OPREGION_ID	0x9E
> +#define ECLITE_CMD_OPREGION_ID	0x9F
> +
> +#define ECL_MSG_DATA	0x1
> +#define ECL_MSG_EVENT	0x2
> +
> +#define ECL_ISH_READ	0x1
> +#define ECL_ISH_WRITE	0x2
> +#define ECL_ISH_HEADER_VERSION	0
> +
> +#define ECL_CL_RX_RING_SIZE	16
> +#define ECL_CL_TX_RING_SIZE	8
> +
> +#define ECL_DATA_OPR_BUFLEN	384
> +#define ECL_EVENTS_NOTIFY	333
> +
> +#define cmd_opr_offsetof(element)	offsetof(struct opregion_cmd, element)
> +#define cl_data_to_dev(opr_dev)	ishtp_device((opr_dev)->cl_device)
> +
> +#ifndef BITS_TO_BYTES
> +#define BITS_TO_BYTES(x) ((x) / 8)
> +#endif
> +
> +struct opregion_cmd {
> +	unsigned int command;
> +	unsigned int offset;
> +	unsigned int length;
> +	unsigned int event_id;
> +};
> +
> +struct opregion_data {
> +	char data[ECL_DATA_OPR_BUFLEN];
> +};
> +
> +struct opregion_context {
> +	struct opregion_cmd cmd_area;
> +	struct opregion_data data_area;
> +};
> +
> +struct ecl_message_header {
> +	unsigned int version:2;
> +	unsigned int data_type:2;
> +	unsigned int request_type:2;
> +	unsigned int offset:9;
> +	unsigned int data_len:9;
> +	unsigned int event:8;
> +};
> +
> +struct ecl_message {
> +	struct ecl_message_header header;
> +	char payload[ECL_DATA_OPR_BUFLEN];
> +};
> +
> +struct ishtp_opregion_dev {
> +	struct opregion_context opr_context;
> +	struct ishtp_cl *ecl_ishtp_cl;
> +	struct ishtp_cl_device *cl_device;
> +	struct ishtp_fw_client *fw_client;
> +	struct ishtp_cl_rb *rb;
> +	struct acpi_device *adev;
> +	unsigned int dsm_event_id;
> +	unsigned int ish_link_ready;
> +	unsigned int ish_read_done;
> +	unsigned int acpi_init_done;
> +	wait_queue_head_t read_wait;
> +	struct work_struct event_work;
> +	struct work_struct reset_work;
> +	/* lock for opregion context */
> +	struct mutex lock;
> +
> +};
> +
> +/* eclite ishtp client UUID: 6a19cc4b-d760-4de3-b14d-f25ebd0fbcd9 */
> +static const guid_t ecl_ishtp_guid =
> +	GUID_INIT(0x6a19cc4b, 0xd760, 0x4de3,
> +		  0xb1, 0x4d, 0xf2, 0x5e, 0xbd, 0xf, 0xbc, 0xd9);
> +
> +/* ACPI DSM UUID: 91d936a7-1f01-49c6-a6b4-72f00ad8d8a5 */
> +static const guid_t ecl_acpi_guid =
> +	GUID_INIT(0x91d936a7, 0x1f01, 0x49c6, 0xa6,
> +		  0xb4, 0x72, 0xf0, 0x0a, 0xd8, 0xd8, 0xa5);
> +
> +/**
> + * ecl_ish_cl_read() - Read data from eclite FW
> + *
> + * @opr_dev:  pointer to opregion device
> + *
> + * This function issues a read request to eclite FW and waits until it
> + * receives a response. When response is received the read data is copied to
> + * opregion buffer.
> + */
> +static int ecl_ish_cl_read(struct ishtp_opregion_dev *opr_dev)
> +{
> +	struct ecl_message_header header;
> +	int len, rv;
> +
> +	if (!opr_dev->ish_link_ready)
> +		return -EIO;
> +
> +	if ((opr_dev->opr_context.cmd_area.offset +
> +	     opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) {
> +		return -EINVAL;
> +	}
> +
> +	header.version = ECL_ISH_HEADER_VERSION;
> +	header.data_type = ECL_MSG_DATA;
> +	header.request_type = ECL_ISH_READ;
> +	header.offset = opr_dev->opr_context.cmd_area.offset;
> +	header.data_len = opr_dev->opr_context.cmd_area.length;
> +	header.event = opr_dev->opr_context.cmd_area.event_id;
> +	len = sizeof(header);
> +
> +	opr_dev->ish_read_done = false;
> +	rv = ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&header, len);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "ish-read : send failed\n");
> +		return -EIO;
> +	}
> +
> +	dev_dbg(cl_data_to_dev(opr_dev),
> +		"[ish_rd] Req: off : %x, len : %x\n",
> +		header.offset,
> +		header.data_len);
> +
> +	rv = wait_event_interruptible_timeout(opr_dev->read_wait,
> +					      opr_dev->ish_read_done,
> +					      2 * HZ);
> +	if (!rv) {
> +		dev_err(cl_data_to_dev(opr_dev),
> +			"[ish_rd] No response from firmware\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * ecl_ish_cl_write() - This function writes data to eclite FW.
> + *
> + * @opr_dev:  pointer to opregion device
> + *
> + * This function writes data to eclite FW.
> + */
> +static int ecl_ish_cl_write(struct ishtp_opregion_dev *opr_dev)
> +{
> +	struct ecl_message message;
> +	int len;
> +
> +	if (!opr_dev->ish_link_ready)
> +		return -EIO;
> +
> +	if ((opr_dev->opr_context.cmd_area.offset +
> +	     opr_dev->opr_context.cmd_area.length) > ECL_DATA_OPR_BUFLEN) {
> +		return -EINVAL;
> +	}
> +
> +	message.header.version = ECL_ISH_HEADER_VERSION;
> +	message.header.data_type = ECL_MSG_DATA;
> +	message.header.request_type = ECL_ISH_WRITE;
> +	message.header.offset = opr_dev->opr_context.cmd_area.offset;
> +	message.header.data_len = opr_dev->opr_context.cmd_area.length;
> +	message.header.event = opr_dev->opr_context.cmd_area.event_id;
> +	len = sizeof(struct ecl_message_header) + message.header.data_len;
> +
> +	memcpy(message.payload,
> +	       opr_dev->opr_context.data_area.data + message.header.offset,
> +	       message.header.data_len);
> +
> +	dev_dbg(cl_data_to_dev(opr_dev),
> +		"[ish_wr] off : %x, len : %x\n",
> +		message.header.offset,
> +		message.header.data_len);
> +
> +	return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len);
> +}
> +
> +static acpi_status
> +ecl_opregion_cmd_handler(u32 function, acpi_physical_address address,
> +			 u32 bits, u64 *value64,
> +			 void *handler_context, void *region_context)
> +{
> +	struct ishtp_opregion_dev *opr_dev;
> +	struct opregion_cmd *cmd;
> +	acpi_status status = AE_OK;
> +
> +	if (!region_context || !value64)
> +		return AE_BAD_PARAMETER;
> +
> +	if (function == ACPI_READ)
> +		return AE_ERROR;
> +
> +	opr_dev = (struct ishtp_opregion_dev *)region_context;
> +
> +	mutex_lock(&opr_dev->lock);
> +
> +	cmd = &opr_dev->opr_context.cmd_area;
> +
> +	switch (address) {
> +	case cmd_opr_offsetof(command):
> +		cmd->command = (u32)*value64;
> +
> +		if (cmd->command == ECL_ISH_READ)
> +			status =  ecl_ish_cl_read(opr_dev);
> +		else if (cmd->command == ECL_ISH_WRITE)
> +			status = ecl_ish_cl_write(opr_dev);
> +		else
> +			status = AE_ERROR;
> +		break;
> +	case cmd_opr_offsetof(offset):
> +		cmd->offset = (u32)*value64;
> +		break;
> +	case cmd_opr_offsetof(length):
> +		cmd->length = (u32)*value64;
> +		break;
> +	case cmd_opr_offsetof(event_id):
> +		cmd->event_id = (u32)*value64;
> +		break;
> +	default:
> +		status = AE_ERROR;
> +	}
> +
> +	mutex_unlock(&opr_dev->lock);
> +
> +	return status;
> +}
> +
> +static acpi_status
> +ecl_opregion_data_handler(u32 function, acpi_physical_address address,
> +			  u32 bits, u64 *value64,
> +			  void *handler_context, void *region_context)
> +{
> +	struct ishtp_opregion_dev *opr_dev;
> +	unsigned int bytes = BITS_TO_BYTES(bits);
> +	void *data_addr;
> +
> +	if (!region_context || !value64)
> +		return AE_BAD_PARAMETER;
> +
> +	if (address + bytes > ECL_DATA_OPR_BUFLEN)
> +		return AE_BAD_PARAMETER;
> +
> +	opr_dev = (struct ishtp_opregion_dev *)region_context;
> +
> +	mutex_lock(&opr_dev->lock);
> +
> +	data_addr = &opr_dev->opr_context.data_area.data[address];
> +
> +	if (function == ACPI_READ) {
> +		memcpy(value64, data_addr, bytes);
> +	} else if (function == ACPI_WRITE) {
> +		memcpy(data_addr, value64, bytes);
> +	} else {
> +		mutex_unlock(&opr_dev->lock);
> +		return AE_BAD_PARAMETER;
> +	}
> +
> +	mutex_unlock(&opr_dev->lock);
> +
> +	return AE_OK;
> +}
> +
> +static int acpi_find_eclite_device(struct ishtp_opregion_dev *opr_dev)
> +{
> +	struct acpi_device *adev;
> +
> +	/* Find ECLite device and save reference */
> +	adev = acpi_dev_get_first_match_dev("INTC1035", NULL, -1);
> +	if (!adev) {
> +		dev_err(cl_data_to_dev(opr_dev), "eclite ACPI device not found\n");
> +		return -ENODEV;
> +	}
> +
> +	opr_dev->adev = adev;
> +
> +	return 0;
> +}
> +
> +static int acpi_opregion_init(struct ishtp_opregion_dev *opr_dev)
> +{
> +	acpi_status status;
> +
> +	status = acpi_install_address_space_handler(opr_dev->adev->handle,
> +						    ECLITE_CMD_OPREGION_ID,
> +						    ecl_opregion_cmd_handler,
> +						    NULL, opr_dev);
> +	if (ACPI_FAILURE(status)) {
> +		dev_err(cl_data_to_dev(opr_dev),
> +			"cmd space handler install failed\n");
> +		return -ENODEV;
> +	}
> +
> +	status = acpi_install_address_space_handler(opr_dev->adev->handle,
> +						    ECLITE_DATA_OPREGION_ID,
> +						    ecl_opregion_data_handler,
> +						    NULL, opr_dev);
> +	if (ACPI_FAILURE(status)) {
> +		dev_err(cl_data_to_dev(opr_dev),
> +			"data space handler install failed\n");
> +
> +		acpi_remove_address_space_handler(opr_dev->adev->handle,
> +						  ECLITE_CMD_OPREGION_ID,
> +						  ecl_opregion_cmd_handler);
> +		return -ENODEV;
> +	}
> +	opr_dev->acpi_init_done = true;
> +
> +	dev_dbg(cl_data_to_dev(opr_dev), "Opregion handlers are installed\n");
> +
> +	return 0;
> +}
> +
> +static void acpi_opregion_deinit(struct ishtp_opregion_dev *opr_dev)
> +{
> +	acpi_remove_address_space_handler(opr_dev->adev->handle,
> +					  ECLITE_CMD_OPREGION_ID,
> +					  ecl_opregion_cmd_handler);
> +
> +	acpi_remove_address_space_handler(opr_dev->adev->handle,
> +					  ECLITE_DATA_OPREGION_ID,
> +					  ecl_opregion_data_handler);
> +	opr_dev->acpi_init_done = false;
> +}
> +
> +static void ecl_acpi_invoke_dsm(struct work_struct *work)
> +{
> +	struct ishtp_opregion_dev *opr_dev;
> +	union acpi_object *obj;
> +
> +	opr_dev = container_of(work, struct ishtp_opregion_dev, event_work);
> +	if (!opr_dev->acpi_init_done)
> +		return;
> +
> +	obj = acpi_evaluate_dsm(opr_dev->adev->handle, &ecl_acpi_guid, 0,
> +				opr_dev->dsm_event_id, NULL);
> +	if (!obj) {
> +		dev_warn(cl_data_to_dev(opr_dev), "_DSM fn call failed\n");
> +		return;
> +	}
> +
> +	dev_dbg(cl_data_to_dev(opr_dev), "Exec DSM function code: %d success\n",
> +		opr_dev->dsm_event_id);
> +
> +	ACPI_FREE(obj);
> +}
> +
> +static void ecl_ish_process_rx_data(struct ishtp_opregion_dev *opr_dev)
> +{
> +	struct ecl_message *message =
> +		(struct ecl_message *)opr_dev->rb->buffer.data;
> +
> +	dev_dbg(cl_data_to_dev(opr_dev),
> +		"[ish_rd] Resp: off : %x, len : %x\n",
> +		message->header.offset,
> +		message->header.data_len);
> +
> +	if ((message->header.offset + message->header.data_len) >
> +			ECL_DATA_OPR_BUFLEN) {
> +		return;
> +	}
> +
> +	memcpy(opr_dev->opr_context.data_area.data + message->header.offset,
> +	       message->payload, message->header.data_len);
> +
> +	opr_dev->ish_read_done = true;
> +	wake_up_interruptible(&opr_dev->read_wait);
> +}
> +
> +static void ecl_ish_process_rx_event(struct ishtp_opregion_dev *opr_dev)
> +{
> +	struct ecl_message_header *header =
> +		(struct ecl_message_header *)opr_dev->rb->buffer.data;
> +
> +	dev_dbg(cl_data_to_dev(opr_dev),
> +		"[ish_ev] Evt received: %8x\n", header->event);
> +
> +	opr_dev->dsm_event_id = header->event;
> +	schedule_work(&opr_dev->event_work);
> +}
> +
> +static int ecl_ish_cl_enable_events(struct ishtp_opregion_dev *opr_dev,
> +				    bool config_enable)
> +{
> +	struct ecl_message message;
> +	int len;
> +
> +	message.header.version = ECL_ISH_HEADER_VERSION;
> +	message.header.data_type = ECL_MSG_DATA;
> +	message.header.request_type = ECL_ISH_WRITE;
> +	message.header.offset = ECL_EVENTS_NOTIFY;
> +	message.header.data_len = 1;
> +	message.payload[0] = config_enable;
> +
> +	len = sizeof(struct ecl_message_header) + message.header.data_len;
> +
> +	return ishtp_cl_send(opr_dev->ecl_ishtp_cl, (uint8_t *)&message, len);
> +}
> +
> +static void ecl_ishtp_cl_event_cb(struct ishtp_cl_device *cl_device)
> +{
> +	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
> +	struct ishtp_opregion_dev *opr_dev;
> +	struct ecl_message_header *header;
> +	struct ishtp_cl_rb *rb;
> +
> +	opr_dev = ishtp_get_client_data(ecl_ishtp_cl);
> +	while ((rb = ishtp_cl_rx_get_rb(opr_dev->ecl_ishtp_cl)) != NULL) {
> +		opr_dev->rb = rb;
> +		header = (struct ecl_message_header *)rb->buffer.data;
> +
> +		if (header->data_type == ECL_MSG_DATA)
> +			ecl_ish_process_rx_data(opr_dev);
> +		else if (header->data_type == ECL_MSG_EVENT)
> +			ecl_ish_process_rx_event(opr_dev);
> +		else
> +			/* Got an event with wrong data_type, ignore it */
> +			dev_err(cl_data_to_dev(opr_dev),
> +				"[ish_cb] Received wrong data_type\n");
> +
> +		ishtp_cl_io_rb_recycle(rb);
> +	}
> +}
> +
> +static int ecl_ishtp_cl_init(struct ishtp_cl *ecl_ishtp_cl)
> +{
> +	struct ishtp_opregion_dev *opr_dev =
> +		ishtp_get_client_data(ecl_ishtp_cl);
> +	struct ishtp_fw_client *fw_client;
> +	struct ishtp_device *dev;
> +	int rv;
> +
> +	rv = ishtp_cl_link(ecl_ishtp_cl);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "ishtp_cl_link failed\n");
> +		return	rv;
> +	}
> +
> +	dev = ishtp_get_ishtp_device(ecl_ishtp_cl);
> +
> +	/* Connect to FW client */
> +	ishtp_set_tx_ring_size(ecl_ishtp_cl, ECL_CL_TX_RING_SIZE);
> +	ishtp_set_rx_ring_size(ecl_ishtp_cl, ECL_CL_RX_RING_SIZE);
> +
> +	fw_client = ishtp_fw_cl_get_client(dev, &ecl_ishtp_guid);
> +	if (!fw_client) {
> +		dev_err(cl_data_to_dev(opr_dev), "fw client not found\n");
> +		return -ENOENT;
> +	}
> +
> +	ishtp_cl_set_fw_client_id(ecl_ishtp_cl,
> +				  ishtp_get_fw_client_id(fw_client));
> +
> +	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_CONNECTING);
> +
> +	rv = ishtp_cl_connect(ecl_ishtp_cl);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "client connect failed\n");
> +
> +		ishtp_cl_unlink(ecl_ishtp_cl);
> +		return rv;
> +	}
> +
> +	dev_dbg(cl_data_to_dev(opr_dev), "Host connected to fw client\n");
> +
> +	return 0;
> +}
> +
> +static void ecl_ishtp_cl_deinit(struct ishtp_cl *ecl_ishtp_cl)
> +{
> +	ishtp_cl_unlink(ecl_ishtp_cl);
> +	ishtp_cl_flush_queues(ecl_ishtp_cl);
> +	ishtp_cl_free(ecl_ishtp_cl);
> +}
> +
> +static void ecl_ishtp_cl_reset_handler(struct work_struct *work)
> +{
> +	struct ishtp_opregion_dev *opr_dev;
> +	struct ishtp_cl_device *cl_device;
> +	struct ishtp_cl *ecl_ishtp_cl;
> +	int rv;
> +	int retry;
> +
> +	opr_dev = container_of(work, struct ishtp_opregion_dev, reset_work);
> +
> +	opr_dev->ish_link_ready = false;
> +
> +	cl_device = opr_dev->cl_device;
> +	ecl_ishtp_cl = opr_dev->ecl_ishtp_cl;
> +
> +	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
> +
> +	ecl_ishtp_cl = ishtp_cl_allocate(cl_device);
> +	if (!ecl_ishtp_cl)
> +		return;
> +
> +	ishtp_set_drvdata(cl_device, ecl_ishtp_cl);
> +	ishtp_set_client_data(ecl_ishtp_cl, opr_dev);
> +
> +	opr_dev->ecl_ishtp_cl = ecl_ishtp_cl;
> +
> +	for (retry = 0; retry < 3; ++retry) {
> +		rv = ecl_ishtp_cl_init(ecl_ishtp_cl);
> +		if (!rv)
> +			break;
> +	}
> +	if (rv) {
> +		ishtp_cl_free(ecl_ishtp_cl);
> +		opr_dev->ecl_ishtp_cl = NULL;
> +		dev_err(cl_data_to_dev(opr_dev),
> +			"[ish_rst] Reset failed. Link not ready.\n");
> +		return;
> +	}
> +
> +	ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb);
> +	dev_info(cl_data_to_dev(opr_dev),
> +		 "[ish_rst] Reset Success. Link ready.\n");
> +
> +	opr_dev->ish_link_ready = true;
> +
> +	if (opr_dev->acpi_init_done)
> +		return;
> +
> +	rv = acpi_opregion_init(opr_dev);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev),
> +			"ACPI opregion init failed\n");
> +	}
> +}
> +
> +static int ecl_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
> +{
> +	struct ishtp_cl *ecl_ishtp_cl;
> +	struct ishtp_opregion_dev *opr_dev;
> +	int rv;
> +
> +	opr_dev = devm_kzalloc(ishtp_device(cl_device), sizeof(*opr_dev),
> +			       GFP_KERNEL);
> +	if (!opr_dev)
> +		return -ENOMEM;
> +
> +	ecl_ishtp_cl = ishtp_cl_allocate(cl_device);
> +	if (!ecl_ishtp_cl)
> +		return -ENOMEM;
> +
> +	ishtp_set_drvdata(cl_device, ecl_ishtp_cl);
> +	ishtp_set_client_data(ecl_ishtp_cl, opr_dev);
> +	opr_dev->ecl_ishtp_cl = ecl_ishtp_cl;
> +	opr_dev->cl_device = cl_device;
> +
> +	init_waitqueue_head(&opr_dev->read_wait);
> +	INIT_WORK(&opr_dev->event_work, ecl_acpi_invoke_dsm);
> +	INIT_WORK(&opr_dev->reset_work, ecl_ishtp_cl_reset_handler);
> +
> +	/* Initialize ish client device */
> +	rv = ecl_ishtp_cl_init(ecl_ishtp_cl);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "Client init failed\n");
> +		goto err_exit;
> +	}
> +
> +	dev_dbg(cl_data_to_dev(opr_dev), "eclite-ishtp client initialised\n");
> +
> +	opr_dev->ish_link_ready = true;
> +	mutex_init(&opr_dev->lock);
> +
> +	rv = acpi_find_eclite_device(opr_dev);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "ECLite ACPI ID not found\n");
> +		goto err_exit;
> +	}
> +
> +	/* Register a handler for eclite fw events */
> +	ishtp_register_event_cb(cl_device, ecl_ishtp_cl_event_cb);
> +
> +	/* Now init opregion handlers */
> +	rv = acpi_opregion_init(opr_dev);
> +	if (rv) {
> +		dev_err(cl_data_to_dev(opr_dev), "ACPI opregion init failed\n");
> +		goto err_exit;
> +	}
> +
> +	/* Reprobe devices depending on ECLite - battery, fan, etc. */
> +	acpi_dev_clear_dependencies(opr_dev->adev);
> +
> +	return 0;
> +err_exit:
> +	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING);
> +	ishtp_cl_disconnect(ecl_ishtp_cl);
> +	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
> +
> +	return rv;
> +}
> +
> +static void ecl_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
> +{
> +	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
> +	struct ishtp_opregion_dev *opr_dev =
> +		ishtp_get_client_data(ecl_ishtp_cl);
> +
> +	if (opr_dev->acpi_init_done)
> +		acpi_opregion_deinit(opr_dev);
> +
> +	acpi_dev_put(opr_dev->adev);
> +
> +	ishtp_set_connection_state(ecl_ishtp_cl, ISHTP_CL_DISCONNECTING);
> +	ishtp_cl_disconnect(ecl_ishtp_cl);
> +	ecl_ishtp_cl_deinit(ecl_ishtp_cl);
> +
> +	cancel_work_sync(&opr_dev->reset_work);
> +	cancel_work_sync(&opr_dev->event_work);
> +}
> +
> +static int ecl_ishtp_cl_reset(struct ishtp_cl_device *cl_device)
> +{
> +	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
> +	struct ishtp_opregion_dev *opr_dev =
> +		ishtp_get_client_data(ecl_ishtp_cl);
> +
> +	schedule_work(&opr_dev->reset_work);
> +
> +	return 0;
> +}
> +
> +static int ecl_ishtp_cl_suspend(struct device *device)
> +{
> +	struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
> +	struct ishtp_cl *ecl_ishtp_cl = ishtp_get_drvdata(cl_device);
> +	struct ishtp_opregion_dev *opr_dev =
> +		ishtp_get_client_data(ecl_ishtp_cl);
> +
> +	if (acpi_target_system_state() == ACPI_STATE_S0)
> +		return 0;
> +
> +	acpi_opregion_deinit(opr_dev);
> +	ecl_ish_cl_enable_events(opr_dev, false);
> +
> +	return 0;
> +}
> +
> +static int ecl_ishtp_cl_resume(struct device *device)
> +{
> +	/* A reset is expected to call after an Sx. At this point
> +	 * we are not sure if the link is up or not to restore anything,
> +	 * so do nothing in resume path
> +	 */
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops ecl_ishtp_pm_ops = {
> +	.suspend = ecl_ishtp_cl_suspend,
> +	.resume = ecl_ishtp_cl_resume,
> +};
> +
> +static struct ishtp_cl_driver ecl_ishtp_cl_driver = {
> +	.name = "ishtp-eclite",
> +	.guid = &ecl_ishtp_guid,
> +	.probe = ecl_ishtp_cl_probe,
> +	.remove = ecl_ishtp_cl_remove,
> +	.reset = ecl_ishtp_cl_reset,
> +	.driver.pm = &ecl_ishtp_pm_ops,
> +};
> +
> +static int __init ecl_ishtp_init(void)
> +{
> +	return ishtp_cl_driver_register(&ecl_ishtp_cl_driver, THIS_MODULE);
> +}
> +
> +static void __exit ecl_ishtp_exit(void)
> +{
> +	return ishtp_cl_driver_unregister(&ecl_ishtp_cl_driver);
> +}
> +
> +late_initcall(ecl_ishtp_init);
> +module_exit(ecl_ishtp_exit);
> +
> +MODULE_DESCRIPTION("ISH ISHTP eclite client opregion driver");
> +MODULE_AUTHOR("K Naduvalath, Sumesh <sumesh.k.naduvalath@...el.com>");
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("ishtp:*");
> 

Powered by blists - more mailing lists