linux-kernel - [PATCH V8 0/8] Add QSPI and QUPv3 DT nodes for SC7280 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1631872087-24416-1-git-send-email-rajpat@codeaurora.org>
Date:   Fri, 17 Sep 2021 15:17:59 +0530
From:   Rajesh Patil <rajpat@...eaurora.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, rnayak@...eaurora.org,
        saiprakash.ranjan@...eaurora.org, msavaliy@....qualcomm.com,
        skakit@...eaurora.org, sboyd@...nel.org, mka@...omium.org,
        dianders@...omium.org, Rajesh Patil <rajpat@...eaurora.org>
Subject: [PATCH V8 0/8] Add QSPI and QUPv3 DT nodes for SC7280 SoC

Changes in V8:
 - As per Matthias comments 
   Added qup_spiN_cs_gpio nodes in all spi ports

 - As per Doug comments, Added "qcom,sc7280-qspi" compatible in qspi node

Changes in V7:
 - As per Stephen's comments
   1. Moved qup_opp_table under /soc@...eniqup@...000
   2. Removed qupv3_id_1 in sc7280-idp board file
   3. Sorted alias names for i2c and spi as per alphabet order

 - As per Matthias comment
   Configuring cs pin with gpio (qup_spiN_cs_gpio) definitions are removed

Changes in V6:
 - As per Matthias' comments,
   1. Squashed "Update QUPv3 UART5 DT node" and "Configure debug 
      uart for sc7280-idp"
   2. Moved qup_opp_table from /soc to /
   3. Changed convention "clocks" followed by "clock-names"

 - As per Doug comments, added aliases for i2c and spi

Changes in V5:
 - As per Matthias' comments, I've split the patches as below:
   1. Add QSPI node
   2. Configure SPI-NOR FLASH for sc7280-idp
   3. Add QUPv3 wrapper_0 nodes
   4. Update QUPv3 UART5 DT node
   5. Configure debug uart for sc7280-idp
   6. Configure uart7 to support bluetooth on sc7280-idp
   7. Add QUPv3 wrapper_1 nodes

Changes in V4:
 - As per Stephen's comment updated spi-max-frequency to 37.5MHz, moved
   qspi_opp_table from /soc to / (root).
 - As per Bjorn's comment, added QUP Wrapper_0 nodes
   as separate patch and debug-uart node as separate patch.
 - Dropped interconnect votes for wrapper_0 and wrapper_1 node
 - Corrected QUP Wrapper_1 SE node's pin control functions like below
        QUP Wrapper_0: SE0-SE7 uses qup00 - qup07 pin-cntrl functions.
        QUP Wrapper_1: SE0-SE7 uses qup10 - qup17 pin-cntrl functions.

Changes in V3:
 - Broken the huge V2 patch into 3 smaller patches.
   1. QSPI DT nodes
   2. QUP wrapper_0 DT nodes
   3. QUP wrapper_1 DT nodes

Changes in V2:
 - As per Doug's comments removed pinmux/pinconf subnodes.
 - As per Doug's comments split of SPI, UART nodes has been done.
 - Moved QSPI node before aps_smmu as per the order.

Rajesh Patil (4):
  dt-bindings: spi: add QSPI bindings for sc7280 chipset
  arm64: dts: sc7280: Configure SPI-NOR FLASH for sc7280-idp
  arm64: dts: sc7280: Configure uart7 to support bluetooth on sc7280-idp
  arm64: dts: sc7280: Add aliases for I2C and SPI

Roja Rani Yarubandi (4):
  arm64: dts: sc7280: Add QSPI node
  arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes
  arm64: dts: sc7280: Update QUPv3 UART5 DT node
  arm64: dts: sc7280: Add QUPv3 wrapper_1 nodes

 .../bindings/spi/qcom,spi-qcom-qspi.yaml           |    5 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  125 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 3216 +++++++++++++++-----
 3 files changed, 2520 insertions(+), 826 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation