linux-kernel - Re: [PATCH v3 01/17] clk: at91: re-factor clocks suspend/resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <75da98f4-dd5d-33ae-33f0-4b3dbfc4e7b2@microchip.com>
Date:   Fri, 17 Sep 2021 12:20:33 +0000
From:   <Claudiu.Beznea@...rochip.com>
To:     <mturquette@...libre.com>, <sboyd@...nel.org>,
        <Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <Ludovic.Desroches@...rochip.com>
CC:     <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 01/17] clk: at91: re-factor clocks suspend/resume

On 17.09.2021 15:06, Claudiu Beznea wrote:
> SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
> most of the SoC's components are powered off (including PMC). Resuming
> from this mode is done with the help of bootloader. Peripherals are not
> aware of the power saving mode thus most of them are disabling clocks in
> proper suspend API and re-enable them in resume API without taking into
> account the previously setup rate. Moreover some of the peripherals are
> acting as wakeup sources and are not disabling the clocks in this
> scenario, when suspending. Since backup mode cuts the power for
> peripherals, in resume part these clocks needs to be re-configured.
> 
> The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
> (as it was the only one supporting backup mode). SAMA7G supports also
> backup mode and its PMC is different (few new functionalities, different
> registers offsets, different offsets in registers for each
> functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
> .save_context()/.resume_context() support to each clocks driver and call
> this from PMC driver.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>

I forgot to mention that this patch applies good on top of patch at [1].

Thank you,
Claudiu Beznea

[1]
https://lore.kernel.org/lkml/20210913082633.110168-1-clement.leger@bootlin.com/