| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210919182428.1075113-1-olek2@wp.pl>
Date: Sun, 19 Sep 2021 20:24:28 +0200
From: Aleksander Jan Bajkowski <olek2@...pl>
To: hauke@...ke-m.de, davem@...emloft.net, kuba@...nel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@...pl>
Subject: [net-next] net: lantiq: add support for jumbo frames
Add support for jumbo frames. Full support for jumbo frames requires
changes in the DSA switch driver (lantiq_gswip.c).
Tested on BT Hone Hub 5A.
Signed-off-by: Aleksander Jan Bajkowski <olek2@...pl>
---
drivers/net/ethernet/lantiq_xrx200.c | 64 +++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index fb78f17d734f..fd355e238ab6 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -14,13 +14,15 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/if_vlan.h>
+
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <xway_dma.h>
/* DMA */
-#define XRX200_DMA_DATA_LEN 0x600
+#define XRX200_DMA_DATA_LEN (SZ_64K - 1)
#define XRX200_DMA_RX 0
#define XRX200_DMA_TX 1
@@ -106,7 +108,8 @@ static void xrx200_flush_dma(struct xrx200_chan *ch)
break;
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
- XRX200_DMA_DATA_LEN;
+ (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
+ ETH_FCS_LEN);
ch->dma.desc++;
ch->dma.desc %= LTQ_DESC_NUM;
}
@@ -154,19 +157,20 @@ static int xrx200_close(struct net_device *net_dev)
static int xrx200_alloc_skb(struct xrx200_chan *ch)
{
+ int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
struct sk_buff *skb = ch->skb[ch->dma.desc];
dma_addr_t mapping;
int ret = 0;
ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
- XRX200_DMA_DATA_LEN);
+ len);
if (!ch->skb[ch->dma.desc]) {
ret = -ENOMEM;
goto skip;
}
mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
- XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
+ len, DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
ch->skb[ch->dma.desc] = skb;
@@ -179,8 +183,7 @@ static int xrx200_alloc_skb(struct xrx200_chan *ch)
wmb();
skip:
ch->dma.desc_base[ch->dma.desc].ctl =
- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
- XRX200_DMA_DATA_LEN;
+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
return ret;
}
@@ -340,10 +343,57 @@ static netdev_tx_t xrx200_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
}
+static int
+xrx200_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+ struct xrx200_priv *priv = netdev_priv(net_dev);
+ struct xrx200_chan *ch_rx = &priv->chan_rx;
+ int old_mtu = net_dev->mtu;
+ bool running = false;
+ struct sk_buff *skb;
+ int curr_desc;
+ int ret = 0;
+
+ net_dev->mtu = new_mtu;
+
+ if (new_mtu <= old_mtu)
+ return ret;
+
+ running = netif_running(net_dev);
+ if (running) {
+ napi_disable(&ch_rx->napi);
+ ltq_dma_close(&ch_rx->dma);
+ }
+
+ xrx200_poll_rx(&ch_rx->napi, LTQ_DESC_NUM);
+ curr_desc = ch_rx->dma.desc;
+
+ for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
+ ch_rx->dma.desc++) {
+ skb = ch_rx->skb[ch_rx->dma.desc];
+ ret = xrx200_alloc_skb(ch_rx);
+ if (ret) {
+ net_dev->mtu = old_mtu;
+ break;
+ }
+ dev_kfree_skb_any(skb);
+ }
+
+ ch_rx->dma.desc = curr_desc;
+ if (running) {
+ napi_enable(&ch_rx->napi);
+ ltq_dma_open(&ch_rx->dma);
+ ltq_dma_enable_irq(&ch_rx->dma);
+ }
+
+ return ret;
+}
+
static const struct net_device_ops xrx200_netdev_ops = {
.ndo_open = xrx200_open,
.ndo_stop = xrx200_close,
.ndo_start_xmit = xrx200_start_xmit,
+ .ndo_change_mtu = xrx200_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
@@ -453,7 +503,7 @@ static int xrx200_probe(struct platform_device *pdev)
net_dev->netdev_ops = &xrx200_netdev_ops;
SET_NETDEV_DEV(net_dev, dev);
net_dev->min_mtu = ETH_ZLEN;
- net_dev->max_mtu = XRX200_DMA_DATA_LEN;
+ net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
/* load the memory ranges */
priv->pmac_reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
--
2.30.2
Powered by blists - more mailing lists